Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
configuration:wlan-client-bridge [2018/07/17 12:20]
preisig
configuration:wlan-client-bridge [2020/10/01 07:40] (current)
juraschek
Line 1: Line 1:
 ====== WLAN Client Bridge ====== ====== WLAN Client Bridge ======
 +
  
 To bridge a WLAN Client connection with a Ethernet LAN there are some requierments needed. ​ To bridge a WLAN Client connection with a Ethernet LAN there are some requierments needed. ​
-The Wifi Access Point need to Support the 4 Address Frame, which the AP in Netmodule Router does.+The Wifi Access Point as well as the wifi clients ​need to support ​4 Address Frame. ​The configurtion is only possible with the following products: ​
  
-This Funtionality was introduced with the NRSW 4.1.0.100 so please ​use the current Version: [[ftp://​share.netmodule.com/​router/​public/​system-software/​4.1/4.1.0.100/​|4.1.0.100]]+  * NB1800 
 +  * NB1810  
 +  * NB2700 
 +  * NB2710  
 +  * NB2800 
 +  * NB2810 
 +  * NB3700 
 +  * NB3701 
 +  * NB3710 
 +  * NB3711  
 +  * NB3800 
 + 
 +Please ​use the current Version: [[ftp://​share.netmodule.com/​router/​public/​system-software/​4.3/4.3.0.106/|4.3.0.106]]. This funtionality was introduced with the NRSW 4.1.0.100
 +In case you running a NB800 or NB1601 you can take a look at our [[configuration:​mesh-point|Mesh Network]] funtionality ​
  
  
Line 29: Line 43:
 {{ :​configuration:​screenshot_-_07042017_-_05_26_10_pm.png?​nolink |}} {{ :​configuration:​screenshot_-_07042017_-_05_26_10_pm.png?​nolink |}}
 {{ :​configuration:​screenshot_-_07042017_-_05_26_18_pm.png?​nolink |}} {{ :​configuration:​screenshot_-_07042017_-_05_26_18_pm.png?​nolink |}}
 +
 +==== Activating the CLient Bridge ====
 +
  
 After the WLAN Connection is set up. Please go to Interfaces->​Link Managment and edit your WLAN Connection After the WLAN Connection is set up. Please go to Interfaces->​Link Managment and edit your WLAN Connection