Differences

This shows you the differences between two versions of the page.

--- configuration:vdsl [2021/04/06 07:37] – typos and grammar fachet
+++ configuration:vdsl [2021/04/26 14:51] (current) – [NB1800 and VDSL connection] fachet
@@ Line 1: / Line 1: @@
-====== NB1800 and VDSL Connection  ======
+====== NB1800 and VDSL connection  ======
-If you want to attach a NetModule Wireless Router to a VDSL Connection, you can now use the NB1800 to do this directly.
+If you want to attach a NetModule Wireless Router to a VDSL connection, you can now use the NB1800 to do this directly.
-There is just a VDSL SFP Transceiver needed and some minor Configurations
+There is just a VDSL SFP transceiver needed and some minor configurations. The test was done with "FMS-VDSL-01" from FMS Internetservice GmbH. Potential - not tested - alternatives:
+  * Metanoia MT-V5311 VDSL2 SFP module
+  * Proscend 180-T VDSL2 SFP Modem für Telco
+  * ALLNET ALL4781-VDSL2-SFP (no ADSL support)
 {{ :configuration:sfp.jpeg?nolink |}}
@@ Line 9: / Line 12: @@
 ===== Requirements =====
-  - NB1800 with SFP Slot
+  - NB1800 with SFP slot
-  - SFP VDSL Extension (Please Contact us for Details)
+  - SFP VDSL extension
-  - Working VDSL Connection
+  - Working VDSL connection
-  - The Credential provided by the VDSL Provider
+  - The credential provided by the VDSL provider
@@ Line 18: / Line 21: @@
 ===== Cabling =====
-Beside being attached to the NB1800 via LAN you also need to provide wiring from the VDSL Connection to the SFP Extension.
+Beside being attached to the NB1800 via LAN you also need to provide wiring from the VDSL connection to the SFP extension.
-In most Cases a TAE to RJ11/RJ45 Cable is sufficient. The RJ45 on Connection on the SFP Side will take the A/B Pins from the VDSL Landline Connection on the two Middle Pins.
+In most cases a TAE to RJ11/RJ45 cable is sufficient. The RJ45 on connection on the SFP side will take the A/B pins from the VDSL landline xonnection on the two middle pins.
 A successful VDSL will be signaled with the LED on the side of the SFP extension.
@@ Line 27: / Line 30: @@
 ===== Configuration =====
-As an Example we will proceed on a Deutsche Telekom VDSL Connection.
+As an example we will proceed on a Deutsche Telekom VDSL connection.
-The SFP Connection is Mapped to LAN3 Internally. For Deutsche Telekom you need to Provide the VDSL Connection on a VLAN tagged connection with VID 7. There you need to create a routed Interface on LAN3 in the VLAN management Page with ID 7.
+The SFP Connection is mapped to LAN3 internally. For Deutsche Telekom you need to provide the VDSL connection on a VLAN tagged connection with VID 7. There you need to create a routed interface on LAN3 in the VLAN management page with ID 7.
 {{ :configuration:screenshot_2021-02-05_18-16-36.png?nolink |}}
-After that you will have seen a new LAN3-1 Interface in the IP Setting Overview
+After that you will have seen a new LAN3-1 Interface in the IP setting overview.
 {{ :configuration:screenshot_2021-02-05_18-16-48.png?nolink |}}
-Edit this Connection and set it to "WAN" and "PPPoE" mode
+Edit this connection and set it to "WAN" and "PPPoE" mode
-You will then need to enter the username and password provided by the ISP
+You will then need to enter the username and password provided by the ISP.
 {{ :configuration:screenshot_2021-02-05_18-17-02.png?nolink |}}
-If the credentials are correctly you will see the Connection UP with details to the IP retrieved on the Status Page
+If the credentials are correctly you will see the connection status UP with details on the status page.
 {{ :configuration:screenshot_2021-02-05_18-12-32.png?nolink |}}

User Tools

Site Tools

Differences

Page Tools