NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
faq:install-licenses-via-usb-stick [2023/09/28 14:54] – [How-to] cakirfaq:install-licenses-via-usb-stick [2023/09/28 18:14] (current) – [How-to] fachet
Line 8: Line 8:
   - If you got the licenses in an archive, extract the license files   - If you got the licenses in an archive, extract the license files
   - Copy all the license files (00112B*.lic) on the stick   - Copy all the license files (00112B*.lic) on the stick
-  - Power on the router and wait until it has booted completely +  - Power on the router and wait until it has booted completely. The STAT LED will turn solid green. 
-  - Plug in the USB stick and wait +  - Plug in the USB stick and the WLAN1 LED will blink slow green. 
-  - +  - When the installation starts, all LEDs blink green and it takes some time.
  
-**The STATUS LED will be solid green and after inserting the USB Stick the WLAN1 LED will also start blinking green/off. Afer a few seconds all LEDs will blink green/off together.**+Finaly LEDs are  
 +  * green: ok 
 +  * yellow: ok, but there was no license change, e.g. installed the same license two times 
 +  * red: something went wrong. (WLAN1 blinking: red = no license file, yellow = license file corrupt) 
 +  
  
-**When the update is done the LEDs will be in a stare where STATUS LED is solid yellow and WLAN1 LED is blinking yellow/red. All other LEDs are solid red.** 
- 
-You can now reboot the device and check the status of the licenses with the command: 
- 
-cli status license 
  
  
 ===== Files ===== ===== Files =====
 <code c autorun.key> <code c autorun.key>
-$1$LVOmS4hg$h3X0lt8xMrlElRyqXODLC/ 
-e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 
-0876dfca6d6fedf99b2ab87b6e2fed4bd4051ede78a8a9135b500b2e94d99b88 
-d6414f06abe9d25df078def16971fc48a0c18fb5da799c141cc8c555683467a7 
-</code> 
-<code c autorun.sh> 
 #!/bin/ash/ #!/bin/ash/
 set -xv set -xv
 echo "SLOW GREEN" > /tmp/status/led-manager/led3 echo "SLOW GREEN" > /tmp/status/led-manager/led3
 +sleep 3
  
-eval $(/usr/local/sbin/cli status -s )+/usr/local/sbin/cli status -s | grep FEATURE_ > /tmp/license.txt
  
 +eval $(/usr/local/sbin/cli status -s | grep SERIAL_NUMBER)
 +cp /mnt/media/autorun/$SERIAL_NUMBER\.lic /tmp/ || echo "FAST RED" > /tmp/status/led-manager/led3 
 sleep 3 sleep 3
-cp /mnt/media/autorun/$SERIAL_NUMBER\.lic /tmp/ || echo "FAST RED" > /tmp/status/led-manager/led3  
-cli update license file:///tmp/$SERIAL_NUMBER\.lic  ||  echo "FAST YELLOW" > /tmp/status/led-manager/led3 
-sleep 5 
- 
-eval $(/usr/local/sbin/cli status -s ) 
  
-if [ "$FEATURE_WLAN" != licensed ]; then +if cli update license file:///tmp/$SERIAL_NUMBER\.lic; then 
-    for i in $(ls /sys/class/leds/*green/brightness); do echo 1 > $i; done+ sleep 5 
 + /usr/local/sbin/cli status -s | grep FEATURE_ > /tmp/license_new.txt 
 + for i in $(ls /sys/class/leds/*green/brightness); do echo 1 > $i; done 
 + if cmp -s /tmp/license.txt /tmp/license_new.txt; then 
 + for i in $(ls /sys/class/leds/*red/brightness); do echo 1 > $i; done 
 + fi
 else else
- for i in $(ls /sys/class/leds/*red/brightness); do echo 1 > $i; done+ sleep 5 
 +   for i in $(ls /sys/class/leds/*red/brightness); do echo 1 > $i; done
 fi fi
 +rm /tmp/license.txt license_new.txt /tmp/license_new.txt /tmp/$SERIAL_NUMBER\.lic
 </code> </code>
  

Page Tools

faq/install-licenses-via-usb-stick.1695912882.txt.gz · Last modified: 2023/09/28 14:54 by cakir