NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
faq:install-licenses-via-usb-stick [2023/09/28 08:14] – fachetfaq:install-licenses-via-usb-stick [2023/09/28 18:14] (current) – [How-to] fachet
Line 2: Line 2:
  
 ===== How-to ===== ===== How-to =====
-=== Preparation === 
   - Router must be in [[faq:install-licenses-via-usb-stick#reset-router-into-factor-reset-state|factory reset state]] (unconfigured)   - Router must be in [[faq:install-licenses-via-usb-stick#reset-router-into-factor-reset-state|factory reset state]] (unconfigured)
   - Format an USB-Stick FAT16/32   - Format an USB-Stick FAT16/32
Line 9: Line 8:
   - If you got the licenses in an archive, extract the license files   - If you got the licenses in an archive, extract the license files
   - Copy all the license files (00112B*.lic) on the stick   - Copy all the license files (00112B*.lic) on the stick
-  - Power on the router and wait until it has booted completely +  - Power on the router and wait until it has booted completely. The STAT LED will turn solid green. 
-  - Plug in the USB stick+  - Plug in the USB stick and the WLAN1 LED will blink slow green. 
 +  - When the installation starts, all LEDs blink green and it takes some time. 
 + 
 +Finaly LEDs are  
 +  * green: ok 
 +  * yellow: ok, but there was no license change, e.g. installed the same license two times 
 +  * red: something went wrong. (WLAN1 blinking: red = no license file, yellow = license file corrupt) 
 +   
  
-=== Progress === 
-An LED will first blink fast red, the fast yellow. 
-If successful the LEDs will be solid green, otherwise red. 
  
 ===== Files ===== ===== Files =====
 <code c autorun.key> <code c autorun.key>
-$1$LVOmS4hg$h3X0lt8xMrlElRyqXODLC/ 
-e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 
-0876dfca6d6fedf99b2ab87b6e2fed4bd4051ede78a8a9135b500b2e94d99b88 
-d6414f06abe9d25df078def16971fc48a0c18fb5da799c141cc8c555683467a7 
-</code> 
-<code c autorun.sh> 
 #!/bin/ash/ #!/bin/ash/
 set -xv set -xv
 echo "SLOW GREEN" > /tmp/status/led-manager/led3 echo "SLOW GREEN" > /tmp/status/led-manager/led3
 +sleep 3
  
-eval $(/usr/local/sbin/cli status -s )+/usr/local/sbin/cli status -s | grep FEATURE_ > /tmp/license.txt
  
-sleep 3+eval $(/usr/local/sbin/cli status -s | grep SERIAL_NUMBER)
 cp /mnt/media/autorun/$SERIAL_NUMBER\.lic /tmp/ || echo "FAST RED" > /tmp/status/led-manager/led3  cp /mnt/media/autorun/$SERIAL_NUMBER\.lic /tmp/ || echo "FAST RED" > /tmp/status/led-manager/led3 
-cli update license file:///tmp/$SERIAL_NUMBER\.lic  ||  echo "FAST YELLOW" > /tmp/status/led-manager/led3 +sleep 3
-sleep 5 +
- +
-eval $(/usr/local/sbin/cli status -s )+
  
-if [ "$FEATURE_WLAN" != licensed ]; then +if cli update license file:///tmp/$SERIAL_NUMBER\.lic; then 
-    for i in $(ls /sys/class/leds/*green/brightness); do echo 1 > $i; done+ sleep 5 
 + /usr/local/sbin/cli status -s | grep FEATURE_ > /tmp/license_new.txt 
 + for i in $(ls /sys/class/leds/*green/brightness); do echo 1 > $i; done 
 + if cmp -s /tmp/license.txt /tmp/license_new.txt; then 
 + for i in $(ls /sys/class/leds/*red/brightness); do echo 1 > $i; done 
 + fi
 else else
- for i in $(ls /sys/class/leds/*red/brightness); do echo 1 > $i; done+ sleep 5 
 +   for i in $(ls /sys/class/leds/*red/brightness); do echo 1 > $i; done
 fi fi
 +rm /tmp/license.txt license_new.txt /tmp/license_new.txt /tmp/$SERIAL_NUMBER\.lic
 </code> </code>
  

Page Tools

faq/install-licenses-via-usb-stick.1695888852.txt.gz · Last modified: 2023/09/28 08:14 by fachet