Differences

This shows you the differences between two versions of the page.

--- configuration:wlan-client-bridge [2020/06/04 05:39] – [WLAN Client Bridge] dodenhoeft
+++ configuration:wlan-client-bridge [2022/01/03 12:57] (current) – schmitt
@@ Line 2: / Line 2: @@
-To bridge a WLAN Client connection with a Ethernet LAN there are some requierments needed.
+To bridge a WLAN Client connection with a Ethernet LAN there are some requirements needed.
-The Wifi Access Point as well as the wifi clients need to support 4 Address Frame. The configurtion is only possible with the following products:
+The WiFi Access Point as well as the WiFi clients need to support 4 Address Frame. The configurtion is only possible with the following products:
   * NB1800
-    * NB1810
+  * NB1810
   * NB2700
-    * NB2710
+  * NB2710
   * NB2800
-    * NB2810
+  * NB2810
   * NB3700
-    * NB3701
+  * NB3701
-    * NB3710
+  * NB3710
-    * NB3711
+  * NB3711
   * NB3800
-This Funtionality was introduced with the NRSW 4.1.0.100 so please use the current Version: [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/|4.1.0.100]]
+Please use the current Version: [[https://share.netmodule.com/public/system-software/4.3/4.3.0.106/|4.3.0.106]]. This funtionality was introduced with the NRSW 4.1.0.100.
+In case you running a NB800 or NB1601 you can take a look at our [[configuration:mesh-network|Mesh Network]] funtionality
@@ Line 26: / Line 27: @@
-{{ :configuration:screenshot_-_07032017_-_03_54_52_pm.png?nolink |}}
+{{ :configuration:wlan_ap.png?nolink |}}
-{{ :configuration:screenshot_-_07032017_-_03_54_42_pm.png?nolink |}}
+{{ :configuration:wlan_conf.png?nolink |}}
 At the IP Settings Page please enable the "4addr frame" and choose the LAN Interface you want to bridge with.
-{{ :configuration:screenshot_-_07032017_-_03_54_32_pm.png?nolink |}}
+{{ :configuration:wlan_ip_settings.png?nolink |}}
@@ Line 38: / Line 39: @@
 Please configure your WLAN Client Connection as usual
-{{ :configuration:screenshot_-_07042017_-_05_25_55_pm.png?nolink |}}
+{{ :configuration:wlanclient_admin.png?nolink |}}
-{{ :configuration:screenshot_-_07042017_-_05_26_04_pm.png?nolink |}}
+{{ :configuration:wlanclient_conf.png?nolink |}}
-{{ :configuration:screenshot_-_07042017_-_05_26_10_pm.png?nolink |}}
+{{ :configuration:wlan_client.png?nolink |}}
-{{ :configuration:screenshot_-_07042017_-_05_26_18_pm.png?nolink |}}
+{{ :configuration:wlanclient_ipset.png?nolink |}}
+==== Activating the CLient Bridge ====
 After the WLAN Connection is set up. Please go to Interfaces->Link Managment and edit your WLAN Connection
@@ Line 47: / Line 51: @@
 Please define your local LAN Interface to bridge with.
-{{ :configuration:screenshot_-_07042017_-_05_26_29_pm.png?nolink |}}
+{{ :configuration:activating_bridge1.png?nolink |}}
-{{ :configuration:screenshot_-_07042017_-_05_26_40_pm.png?nolink |}}
+{{ :configuration:activating_bridge.png?nolink |}}
+----
+===== Other HowTos =====
+[[configuration:mesh-network|Mesh Network]]

User Tools

Site Tools

Differences

Page Tools