NB1800 and VDSL Connection

If you want to attach a NetModule Wireless Router to a VDSL Connection, you can now use the NB1800 to do this directly.

There is just a VDSL SFP Transceiver needed and some minor Configurations

- NB1800 with SFP Slot
- SFP VDSL Extension (Please Contact us for Details)
- Working VDSL Connection
- The Credential provided by the VDSL Prodivder

Beside beeing attached to the NB1800 via LAN you also need to provide Cabeling from the VDSL Connection to the SFP Extension.

In most Cases a TAE to RJ11/RJ45 Cable is sufficent. The RJ45 on Connection on the SFP Side will take the A/B Pins from the VDSL Landline Connection on the two Middle Pins.

A Successfull VDSL will be signaled with the LED on the side of the sfp extension

As an Example we will proceed on a Deutsche Telekom VDSL Connection.

The SFP Connection is Maped to LAN3 Internally. For Deutsche Telekom you need to Provide the VDSL Connection on a VLAN Taged Connection with VID 7. There you you need to create a routed Interface on LAN3 in the VLAN Managment Page with ID 7

After that you will have see a new LAN3-1 Interface in the IP Setting Overview

Edit this Connection and set it to “WAN” and “PPPoE” Mode

You will then need to enter the username and password provided by the ISP

If the credentials are correctly you will see the Connection UP with details to the IP retrieved on the Status Page