Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
configuration:qos [2016/07/18 10:32] dotoli created |
configuration:qos [2017/05/22 08:41] (current) dotoli |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | {{:configuration:add_qos_interface_.png?600|}} | + | ====== QoS Quality of Service ====== |
| + | |||
| + | The ratio must not exceed 40:1 \\ | ||
| + | If there is only traffic for one queue it may use the unused bandwidth of the other queues\\ | ||
| + | Only the output can be configured. \\ | ||
| + | |||
| + | **Bandwith: fixed (WWANX/WAN/OpenVPN) ** \\ | ||
| + | {{:configuration:qos_fixed.png?1200|}} | ||
| + | example: \\ | ||
| + | high: TOS (Dec) 184 = DSCP (Dec), 46 (Hex) 0x2E / for voice application\\ | ||
| + | low: TOS (Dec) 104 = DSCP (Dec), 26 (Hex) 0x1A / for video application\\ | ||
| + | default: All OTHER = not specified | ||
| + | |||
| + | ratio: 19:6:1 = 26Mbit/s bandwidth. This is also the interface output limit. \\ | ||
| + | Because of this it is important to know the permanent throughput . \\ | ||
| + | QoS is no longer working if the throughput falls under 26Mbit/s .\\ | ||
| + | |||
| + | **Bandwidth: auto(WWANX) ** \\ | ||
| + | IP to ping: Configure a reachable host in the internet, preferably the target host. \\ | ||
| + | Based on the RTT the bandwith ratio is divided as follows: \\ | ||
| + | higest priority = 50%, \\ | ||
| + | middle priority = 45%, \\ | ||
| + | lowest priority = 5% \\ | ||
| + | |||