Site Tools

QoS Quality of Service

The ratio must not exceed 40:1
If there is only traffic for one queue it may use the unused bandwidth of the other queues
Only the output can be configured.

Bandwith: fixed (WWANX/WAN/OpenVPN)
high: TOS (Dec) 184 = DSCP (Dec), 46 (Hex) 0x2E / for voice application
low: TOS (Dec) 104 = DSCP (Dec), 26 (Hex) 0x1A / for video application
default: All OTHER = not specified

ratio: 19:6:1 = 26Mbit/s bandwidth. This is also the interface output limit.
Because of this it is important to know the permanent throughput .
QoS is no longer working if the throughput falls under 26Mbit/s .

Bandwidth: auto(WWANX)
IP to ping: Configure a reachable host in the internet, preferably the target host.
Based on the RTT the bandwith ratio is divided as follows:
higest priority = 50%,
middle priority = 45%,
lowest priority = 5%