Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
configuration:gre [2016/08/15 07:19] dotoli |
configuration:gre [2021/11/10 15:45] (current) schmitt |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | Two NB1600 connected through a GRE tunnel over the mobile interface. | + | ====== GRE Tunnel ====== |
| + | The Generic routing encapsulation (GRE) is a communication protocol used to establish a direct, point-to-point connection between network nodes. Being a simple and effective method of transporting data over a public network, such as the Internet, GRE lets two peers share data they wouldn’t be able to share over the public network itself. | ||
| - | Configure of Box1 TAP mode: | ||
| - | config.version=1.8 \ | + | Two NB1600 connected through a GRE tunnel over the mobile interface.\\ |
| - | config.product=1600 \ | + | NB1: 192.168.1.0|192.168.2.0\\ |
| - | network.hostname=NB1600 | + | NB2: 192.168.3.0|192.168.4.0\\ |
| - | cert.settings.phrase=[enc] | + | Both have public IP adresses, 138.188.X.X\\ |
| - | wwan.0.status=1 | + | |
| - | wwan.0.card=0 | + | |
| - | wwan.0.sim=0 | + | **TUN mode:**\\ |
| - | wwan.0.number=*99* | + | |
| - | wwan.0.username=testprofil | + | {{gre_tunnel1.png?|}}\\ |
| - | wwan.0.password=[enc] | + | |
| - | wwan.0.apn=corporate.swisscom.ch | + | Peer address: Public IP address of the remote station (NB1600-X, cisco router ...)\\ |
| - | wwan.0.auth=3 | + | Local tunnel address/netmask: Self defined GRE IP address (remote router local tunnel address: 192.168.8.2)\\ |
| - | wwan.0.hdrcomp=0 | + | Remote network: Destination network / Network of the remote router\\ |
| - | wwan.0.softcomp=0 | + | |
| - | wwan.0.isdn=0 | + | |
| - | usb.status=0 | + | **TAP mode:**\\ |
| - | usb.0.enabled=0 | + | |
| - | usb.1.enabled=0 | + | {{gre_tap1.png?|}}\\ |
| - | autorun.status=0 | + | |
| - | cliphp.status=0 | + | Peer address: Public IP address of the remote station (NB1600-X, cisco router ...)\\ |
| - | network.lan.1.address=192.168.4.1 | + | Bridge interface: LANX; the IP address on both sides must be in the same subnet. (e.g local=192.168.1.1 / remote=192.168.1.2) |
| - | network.dhcp.0.end=192.168.1.120 | + | |
| - | network.dhcp.1.start=192.168.4.100 | + | |
| - | network.dhcp.1.end=192.168.4.199 | + | |
| - | wanlink.0.mode=1 | + | |
| - | wanlink.0.name=wwan0 | + | |
| - | wanlink.0.prio=1 | + | |
| - | wanlink.0.weight=0 | + | |
| - | gre.status=1 | + | |
| - | gre.tunnel.0.mode=1 | + | |
| - | gre.tunnel.0.type=tap | + | |
| - | gre.tunnel.0.peer=138.188.50.3 | + | |
| - | gre.tunnel.0.brdev=lan0 | + | |
| - | admin.password=[enc] | + | |
| - | ssh.port=2222 | + | |
| - | telnet.port=2323 | + | |
| - | **Configure of Box2: | ||
| - | ** | ||
| - | {{:configuration:gre-over-ipsec-box2.png|}} | ||