This is an old revision of the document!

Two NB1600 connected through a GRE tunnel over the mobile interface.

Configure of Box1 TAP mode:

config.version=1.8 \ config.product=1600 \ network.hostname=NB1600 cert.settings.phrase=[enc] wwan.0.status=1 wwan.0.card=0 wwan.0.sim=0 wwan.0.number=*99* wwan.0.username=testprofil wwan.0.password=[enc] wwan.0.apn=corporate.swisscom.ch wwan.0.auth=3 wwan.0.hdrcomp=0 wwan.0.softcomp=0 wwan.0.isdn=0 usb.status=0 usb.0.enabled=0 usb.1.enabled=0 autorun.status=0 cliphp.status=0 network.lan.1.address=192.168.4.1 network.dhcp.0.end=192.168.1.120 network.dhcp.1.start=192.168.4.100 network.dhcp.1.end=192.168.4.199 wanlink.0.mode=1 wanlink.0.name=wwan0 wanlink.0.prio=1 wanlink.0.weight=0 gre.status=1 gre.tunnel.0.mode=1 gre.tunnel.0.type=tap gre.tunnel.0.peer=138.188.50.3 gre.tunnel.0.brdev=lan0 admin.password=[enc] ssh.port=2222 telnet.port=2323

Configure of Box2: