Differences

This shows you the differences between two versions of the page.

--- configuration:extend-ethernet-port-with-vlan [2022/01/26 13:56] – schmitt
+++ configuration:extend-ethernet-port-with-vlan [2022/02/09 15:45] (current) – [Advanced Configuration] schmitt
@@ Line 37: / Line 37: @@
 ==== IP Configuration ====
 Afterwards you need to define the IP Configuration of each VLAN Interface.
 You need to define the Mode of the VLAN Interface which can be LAN or WAN.
-In WAN Mode this link will be part of our link-managment for outgoing connections.
-In LAN Mode you will be able to be part of a local network and serve as a DHCP/DNS Server and so on.
+In WAN mode this link will be part of our link-managment for outgoing connections.
+In LAN mode you will be able to be part of a local network and serve as a DHCP/DNS Server.
 The IP address can be assigned statically or via DHCP. PPPoE is also possible for DSL-Modem scenarios-
@@ Line 86: / Line 89: @@
 ====Advanced Configuration====
-Supervision, because switch port state is not known.
+To check established connections, the router sends pings to a host at a user defined intervall. At Interfaces -> Supervision you can choose options like interface, host, ping intervall and emergency actions.
-To detect network failures the supervision can be used. To check established connections, the router sends pings to a host at a user defined intervall. At Interfaces -> Supervision you can choose options like interface, host, ping intervall and emergency actions.
 {{ :configuration:vlan_supervision_settings.png?nolink |}}
@@ Line 96: / Line 97: @@
 {{ :configuration:vlan_supervision.png?nolink |}}
-More details about configuration : [[config:link-supervision|Use the Link supervison for a stable connection]]
+For more details about configuration : [[config:link-supervision|Use the Link supervison for a stable connection]]

User Tools

Site Tools

Differences

Page Tools