NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
virtualisation:how-to-setup-a-container [2018/08/30 08:25] – [Automatic Setup] juraschekvirtualisation:how-to-setup-a-container [2023/11/28 13:58] (current) – [Manual Setup] dodenhoeft
Line 10: Line 10:
  
 ===== Resources ===== ===== Resources =====
-  * [[ftp://share.netmodule.com/router/public/virt/ubuntu_bionic.tar.xz|Ubuntu Bionic Beaver - armhf]] / md5sum: f91b9f6ff431fdc01194bc100fde296f+  * [[https://share.netmodule.com/router/public/virt/ubuntu_bionic.tar.xz|Ubuntu Bionic Beaver - armhf]] / md5sum: f91b9f6ff431fdc01194bc100fde296f
  
 ===== Automatic Setup ===== ===== Automatic Setup =====
-Using router Software >= [[http://share.netmodule.com/public/system-software/4.1/4.1.0.102/|4.1.0.102]] allows you to download and setup containers automatically from an URL.+Using router Software >= [[http://share.netmodule.com/public/system-software/4.6/4.6.0.101/|4.6.0.101(4.1.0.102)]] allows you to download and setup containers automatically from an URL.
  
   - Open GUI and go to System → Virtualization   - Open GUI and go to System → Virtualization
Line 20: Line 20:
   - You have to enable networking, go to “Networking”, select routed or bridged by the Network Interface and press Apply (working Network connection is required)   - You have to enable networking, go to “Networking”, select routed or bridged by the Network Interface and press Apply (working Network connection is required)
   - You should see a following screen (if you chose extended storage, the path will have storage1 instead of storage0: ''/mnt/storage1/lxc/guest0'') {{ :app-notes:virt.png |}}   - You should see a following screen (if you chose extended storage, the path will have storage1 instead of storage0: ''/mnt/storage1/lxc/guest0'') {{ :app-notes:virt.png |}}
-  - Once you applied your virtualisation settings, select the "Install" tab from the virtualisation menu. Provide the URL of your container archive (__needs to be .tar.xz__). {{ :virtualisation:virt_autosetup.jpg |}}+  - Once you applied your virtualisation settings, select the "Install" tab from the virtualisation menu. Provide the URL of your container archive (__needs to be .tar.xz__). {{ :virtualisation:virt_autosetup.png |}}
  
  
Line 34: Line 34:
   - You should see a following screen (if you chose extended storage, the path will have storage1 instead of storage0: ''/mnt/storage1/lxc/guest0'') {{ :app-notes:virt.png |}}   - You should see a following screen (if you chose extended storage, the path will have storage1 instead of storage0: ''/mnt/storage1/lxc/guest0'') {{ :app-notes:virt.png |}}
   - Transfer the downloaded container (you can use WinSCP) to the router and put in ''/mnt/storage0/lxc''   - Transfer the downloaded container (you can use WinSCP) to the router and put in ''/mnt/storage0/lxc''
-  - Unpack the container: <code> tar xvJf ubuntu_bionic.tar.xz –C ./guest0 </code>+  - Unpack the container: <code> xz -cd /tmp/containerName.tar.xz | tar x -C ./guest0 </code>
   - The extracted container contains a rootfs directory which is now stored under ''/mnt/storage0/lxc/guest0''.   - The extracted container contains a rootfs directory which is now stored under ''/mnt/storage0/lxc/guest0''.
   - Type <code> lxc-start –n guest0 </code>   - Type <code> lxc-start –n guest0 </code>

Page Tools

virtualisation/how-to-setup-a-container.1535617545.txt.gz · Last modified: 2018/08/30 08:25 by juraschek