This is an old revision of the document!
Recovery Update
In some rare situation there is the need to make a recovery update. This update procedure will lead to a complete fresh filesystem of the product afterwards.
Preconditions
Execution
Power off you device
Place a tiny pin in to the reset hole and press the reset button
Power on the device and keep the reset button pressed
Keep the reset button pressed for aprrox. 40 sec. until all LEDs flashed up in the color RED
Release the reset button now
The download of the files recovery-image and recovery-dtb should be visible with the tftp server log
The recovery image will be booted now.
Update Process
Please visit the IP http://192.168.1.1 with your webbrowser.
There will be the system recovery update screen:
Choose the normal doftware Image with the Browser Button and press the upload button to start the recovery update process. The latest software image can be found on our FTP or on the Documentation and Downloads page
Final Steps
Power off you device
Place a tiny pin in to the reset hole and press the reset button
Power on the device and keep the reset button pressed
Keep the reset button pressed for aprrox. 10 sec. until all LEDs flashed up in the color GREEN
The Device will be in the factory state now