This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
troubleshooting:recovery-update [2017/03/31 12:10] – [Troubleshooting] fachet | troubleshooting:recovery-update [2022/07/04 12:57] – [Preconditions] juraschek | ||
---|---|---|---|
Line 3: | Line 3: | ||
In some rare situation there is the need to make a recovery update. | In some rare situation there is the need to make a recovery update. | ||
+ | ===== Request Recovery Images ===== | ||
+ | |||
+ | |||
+ | Please contact us [[https:// | ||
====== Preconditions ====== | ====== Preconditions ====== | ||
- | * You will need to have tftp server running on the IP **192.168.1.254/24** on a PC or other Network Device | + | * You will need to have tftp server running on the ** IP 192.168.1.254 |
* Connect the netModule Router with the tftp Server via Ethernet on the **Ethernet 1** Connector | * Connect the netModule Router with the tftp Server via Ethernet on the **Ethernet 1** Connector | ||
* In case you don't have a tftp server running you can use the Windows Tool [[http:// | * In case you don't have a tftp server running you can use the Windows Tool [[http:// | ||
- | * Please download and copy the recovery files: **recovery-image** and **recovery-dtb** to the root directory of your tftp server | + | * Please download and copy the recovery files: **recovery-image** and **recovery-dtb** to the root directory of your tftp server. |
+ | |||
+ | For NB1601 Products: | ||
+ | * For NB1601 HW Rev. A Please use the Folder NB1601. | ||
+ | * For NB1601 HW Reb B01 Please use the Folder NB1601B. | ||
+ | [[https:// | ||
+ | For NB800 Product: Please choos the right folder according to your Productvariant | ||
| | ||
Line 32: | Line 42: | ||
{{ : | {{ : | ||
- | Choose the normal software Image with the Browser Button and press the upload button to start the recovery update process. The latest software image can be found on our [[ftp:// | + | Choose the normal software Image with the Browser Button and press the upload button to start the recovery update process. The latest software image can be found on our [[https:// |
Line 45: | Line 55: | ||
====== Boot Process ====== | ====== Boot Process ====== | ||
The status LED gives indication about the start of the router. | The status LED gives indication about the start of the router. | ||
- | When the router starts the folling | + | When the router starts, the following |
1. Power off | 1. Power off | ||
Line 54: | Line 64: | ||
Status LED green solid (typical 1-2 secs) | Status LED green solid (typical 1-2 secs) | ||
4. Kernel loaded and started | 4. Kernel loaded and started | ||
- | Satus LED off (typical 1 sec) | + | Status |
- | 5. Startup off applications (init) | + | 5. Starting |
Status LED green blinking | Status LED green blinking | ||
6. Start completed & applications running | 6. Start completed & applications running | ||
Line 63: | Line 73: | ||
1. Status LED solid orange for a long time | 1. Status LED solid orange for a long time | ||
- | Hardware failure -> please | + | Please |
2. Status LED solid green without prior blinking | 2. Status LED solid green without prior blinking | ||
Potential flash problem (CRC) -> make recovery update | Potential flash problem (CRC) -> make recovery update |