This is an old revision of the document!


SDK Samples

ScriptDescription
best-operator.are This script will scan for operators on startup and choose the one with the best signal
candump.are This script can be used to receive CAN messages
config-summary.are This script shows a summary of the currently running configuration.
dio-monitor.are This script monitors the DIO ports and sends a SMS to the specified phone number.
dio-server.are This script implements a TCP server which can be used to control the DIO ports.
dio.are This script can be used to set a digital output port.
dynamic-operator.are This script will scan Mobile2 and dial the appropriate SIM on Mobile1
email-to-sms.are This script implements a lightweight SMTP server which is able to receive mail and forward them as SMS to a phone number.
etherwake.are This script can be used to wake up a sleeping host (WakeOnLan)
gps-monitor.are A script for activating WLAN as soon as GPS position (lat,lon) is within a specified range.
gps-udp-client.are This script sends the local GPS NMEA stream to a remote UDP server.
gps-upd-client-compat.are This script sends the local GPS NMEA stream to a remote UDP server (incl. device identity).
led.are This script can be used to set a LED
mount-media.are This script can be used to mount an USB storage stick.
ping-supervision.are This script will supervise a specified host.
read-config.are This script can be used to read a configuration parameter.
remote-mail.are This script reads and sends mails from a remote IMAP/POP3/SMTP server
scan-mobile.are This script can be used to switch the Mobile LAI according to available networks
scan-wlan.are This script can be used to switch the WLAN client network according to availability
send-mail.are This script will send an E-Mail to the specified address.
send-sms.are This script will send an SMS to the specified phone number.
serial-read.are This script can be used to read messages from the serial port.
serial-readwrite.are This script will write to and read from the serial port.
serial-tcsetattr.are This script can be used to set/get the attributes of the serial port.
serial-udp-server.are This script reads messages coming from the serial port and forwards them via UDP to a remote host (and vice versa).
serial-write.are This script can be used to write a message to the serial port.
sms-control.are This script will execute commands received by SMS.
sms-delete-inbox.are This script can be used to flush the SMS inbox.
sms-read-inbox.are This script can be used to read the SMS inbox.
sms-to-email.are This script will forward incoming SMS messages to a given E-mail address.
sms-to-serial.are This script can be used to write a received SMS to the serial port.
snmp-agent.are This script extends MIB entries of the SNMP agent
snmp-cmd.are This script issues SNMP set/get commands
snmp-trap.are This script can be used to send SNMP traps
status.are This script can be used to display all status variables
syslog.are Throw a simple syslog message.
tcpclient.are This script sends a message to a TCP server.
tcpserver.are This script implements a TCP server which is able to receive messages.
techsupport.are This transfers a techsupport to a remote FTP server
transfer.are This scripts stores the latest GNSS positions in a remote FTP file
udp-msg-server.are This script will run an UDP server which is able to receive messages and forward them as SMS/E-Mail.
udpclient.are This script sends a message to a remote UDP server.
udpserver.are This script implements an UDP server which is able to receive messages.
update-config.are This script can be used to perform a configuration update
voice-dispatcher-audio.are This script implements an audio voice dispatcher
webpage.are This script will generate a page which can be viewed in the Web Manager
write-config.are This script can be used to set a configuration parameter.