Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
sdk:scripts:sms-control [2015/03/03 15:07]
fachet [Application]
sdk:scripts:sms-control [2015/07/23 06:58]
dotoli
Line 1: Line 1:
 ====== SDK Script sms-control.are ====== ====== SDK Script sms-control.are ======
-You will also find this sample script on the router. 
 <code c sms-control.are>​ <code c sms-control.are>​
 /* DESC: This script will execute commands received by SMS. /* DESC: This script will execute commands received by SMS.
Line 152: Line 151:
     rc = nb_dio_set(sprintf("​out%s",​ port), st);     rc = nb_dio_set(sprintf("​out%s",​ port), st);
     if (rc) {     if (rc) {
-        nb_syslog("​Unable to set state %s for DIO output port %s\n", newstate, ​dout);+        nb_syslog("​Unable to set state %s for DIO output port %s\n", newstate, ​port);
         return -1;         return -1;
     } else {            ​     } else {            ​
-        nb_syslog("​Setting state %s for DIO output port %s\n", newstate, ​dout);+        nb_syslog("​Setting state %s for DIO output port %s\n", newstate, ​port);
         return 0;          return 0; 
     }     }
Line 269: Line 268:
  
 </​code>​ </​code>​
------------------------------------------------------------------------------------------------------------------- 
-====== Application ====== 
- 
-Scrips -->edit, Arguments: leave the field empty (by default) or type "​noauth"​\\ 
-empty     ​= ​ the password is needed; 1. line = password, 2. line = command\\ 
-noauth ​   =  no router password is needed, could be a security problem\\ 
- 
-The SMS must be send to the SIM-card phone number. (e.g. +41791112233) ​ 
- 
-**SMS commands:​**\\ 
-status: Sends back the status.\\ 
-connect:​ Builds up the data connection.\\ 
-disconnect: ​    ​ Terminates the data connection.\\ 
-reboot:​ Reboots the router.\\ 
-output [1|2] [on|off]: ​    Turns on/off the desired output port. e.g. "​output 1 off"\\ 
- 
  
 +Configuration:​{{:​sdk:​sms-control.pdf|}}