SNMP

Operation mode: v1 | v2c | v3
Read community: public
This name can be used in order to get/set settings from/to not NetModule devices.

Admin community: e.g. admin
This name must be used in order to get/set settings from/to NetModule devices.
Allowed host: only this host is allowed to get/set settings.

The whole net is configurable over cli:
cli set snmp.admin.host=192.168.1.0/24

iReasoning: Read and Write Community must be equal in order to get/set settings from/to NetModule devices.

Operation mode: v3 only
Use NetModule username “admin” and your password in order to get/set settings.
Other users are not allowed to change settings.