Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| faq:pin_assignment [2014/12/02 10:58] – [NB3710 PIN Assignment] hess | faq:pin_assignment [2026/10/20 12:34] (current) – removed - external edit (Unknown date) 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== NB3710 Extension Ports ====== | ||
| - | The NB3710 has an M12 extension connector with 8 pins. The 8 pins are split into two logical ports: Pins 1 to 4 represent Extension Port 1 (EP1) and pin 5 to 8 represent Extension Port 2 (EP2). In common, EP1 host the serial line of the router, which is a 3-wire RS-232. | ||
| - | |||
| - | Some NB3700 variants use the Digital I/O connector as extension connector. The same pin assignment applies for these variants. | ||
| - | ===== NB3710 PIN Assignment ===== | ||
| - | ^Pin^Port^Base^Audio (A)^CAN (C)^IBIS (I)^RS-485 (Sa)^2nd RS-232 (S)^ | ||
| - | | 1 | EP1 | RS-232 GND | RS-232 GND | RS-232 GND | RS-232 GND | RS-232 GND | RS-232 GND | | ||
| - | | 2 | EP1 | RS-232 TxD | RS-232 TxD | RS-232 TxD | RS-232 TxD | RS-232 TxD | RS-232 TxD | | ||
| - | | 3 | EP1 | RS-232 RxD | RS-232 RxD | RS-232 RxD | RS-232 RxD | RS-232 RxD | RS-232 TxD | | ||
| - | | 4 | EP1 | - | - | - | - | - | - | | ||
| - | | 5 | EP2 | - | Input Left Ch. + | GND | Call GND (Aufrufbus) | RS485 GND | 2nd RS-232 GND | | ||
| - | | 6 | EP2 | - | Input Left Ch. - | L | Call Signal | ||
| - | | 7 | EP2 | - | Output Left Ch. + | H | Reply GND (Antwortbus) | RS485 TxD+/RxD+ (B) | 2nd RS-232 RxD | | ||
| - | | 8 | EP2 | - | Output Left Ch. - | - | Reply Signal | - | - | | ||
| - | ===== M12 Extension Connector ===== | ||
| - | {{: | ||