Differences

This shows you the differences between two versions of the page.

--- documentation:config-parameters [2019/09/19 14:00] – fachet
+++ documentation:config-parameters [2020/08/24 15:21] – gray
@@ Line 13: / Line 13: @@
 </code>
-Use cli get/set to read and write paramters. Example:
+Use cli get/set to read and write paramters.
+Example as user admin (password of web gui):
+<code>
+NB1600 Command Line Interface (version 1.1)
+> get network.lan.1.address
+network.lan.1.address=192.168.2.2
+> set network.lan.1.address=192.168.2.1
+> get network.lan.1.address
+network.lan.1.address=192.168.2.1
+</code>
+Example as user root (password of web gui):
 <code>
 $ cli get network.lan.1.address
 network.lan.1.address=192.168.2.1
 $ cli set network.lan.1.address=192.168.2.2
 $ cli get network.lan.1.address
 network.lan.1.address=192.168.2.2
@@ Line 808: / Line 816: @@
 surveyor.ping.status            integer         0 = disabled, 1 = enabled               Supervision administrative status
 surveyor.ping.x.wanlink         string                                                  Supervision WAN link name
-surveyor.ping.x.mode            integer         0 = also validate when link comes up,   Supervision ping mode
+surveyor.ping.x.mode            integer         1 = also validate when link comes up,   Supervision ping mode
  = only validate if link is up
 surveyor.ping.x.primary         address                                                 Supervision primary ping address
 surveyor.ping.x.secondary       address                                                 Supervision secondary ping address

User Tools

Site Tools

Differences

Page Tools