This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
documentation:config-parameters [2020/08/24 15:21] – gray | documentation:config-parameters [2023/01/31 11:57] – schmitt | ||
---|---|---|---|
Line 73: | Line 73: | ||
# config parameter | # config parameter | ||
+ | # | ||
config.version | config.version | ||
config.product | config.product | ||
config.info | config.info | ||
+ | |||
+ | #System | ||
system.time | system.time | ||
+ | system.login_show_msgs_infos integer 0 = disabled, 1 = enabled shows error massages on the login screen | ||
+ | system.prompt | ||
# networking | # networking | ||
Line 82: | Line 87: | ||
network.timezone | network.timezone | ||
network.tcp.timestamps | network.tcp.timestamps | ||
+ | network.icmp.forward integer 0 = disable, 1 = enable | ||
network.mss.status | network.mss.status | ||
network.mss.adjustment | network.mss.adjustment | ||
# certificates | # certificates | ||
- | cert.deployment | + | cert.deployment |
- | cert.settings.organization | + | cert.settings.organization |
- | cert.settings.department | + | cert.settings.department |
- | cert.settings.location | + | cert.settings.location |
cert.settings.state | cert.settings.state | ||
- | cert.settings.country | + | cert.settings.country |
- | cert.settings.common | + | cert.settings.common |
- | cert.settings.email | + | cert.settings.email |
cert.settings.expiry | cert.settings.expiry | ||
- | cert.settings.phrase | + | cert.settings.phrase |
cert.settings.keysize | cert.settings.keysize | ||
cert.settings.dhsize | cert.settings.dhsize | ||
Line 110: | Line 115: | ||
cert.scep.idtype | cert.scep.idtype | ||
cert.scep.phrase | cert.scep.phrase | ||
+ | cert.ignore integer 0 = disabled, 1 = enabled | ||
+ | |||
+ | #ACME | ||
+ | acme.0.status integer 0 = disable, 1 = enable | ||
+ | acme.0.domain | ||
+ | acme.0.testmode integer 0 = disabled, 1 = enabled | ||
# modems | # modems | ||
modem.x.status | modem.x.status | ||
+ | modem.x.trace.status integer 0 = disabled, 1 = enabled | ||
+ | modem.x.trace.adress address | ||
+ | modem.x.trace.targed address | ||
+ | modem.x.trace.netmask netmask | ||
+ | modem.x.trace.filesize | ||
+ | modem.x.trace.nr_files | ||
+ | modem.x.config.antennas | ||
+ | modem.x.config.idle_lte_attach | ||
+ | modem.x.config.silent_reset | ||
+ | modem.x.trace.urc.status | ||
+ | modem.x.query_interval.signal | ||
+ | modem.x.query_interval.operator | ||
+ | modem.x.config.silent_reset integer 0 = disabled, 1 = enabled send AT+CFUN=15 or not. (CME ERROR) | ||
# SIM cards | # SIM cards | ||
Line 119: | Line 143: | ||
sim.x.lai | sim.x.lai | ||
sim.x.bands | sim.x.bands | ||
- | sim.x.card | + | sim.x.card |
sim.x.pref | sim.x.pref | ||
- | 3G-only, | + | 3G-only, |
+ | 3G/ | ||
sim.x.regmode | sim.x.regmode | ||
1 = packet-switched, | 1 = packet-switched, | ||
Line 127: | Line 153: | ||
# Soft SIMs | # Soft SIMs | ||
- | ssim.x.id | + | ssim.x.id |
- | ssim.x.key | + | ssim.x.key |
- | ssim.x.op | + | ssim.x.op |
# WWAN Interfaces | # WWAN Interfaces | ||
Line 135: | Line 161: | ||
wwan.x.card | wwan.x.card | ||
wwan.x.sim | wwan.x.sim | ||
- | wwan.x.pdp | + | wwan.x.pdp |
- | wwan.x.pref | + | wwan.x.pref |
- | 3G-only, | + | 2G-only, |
- | wwan.x.number | + | 2G-first, |
- | wwan.x.username | + | 2G3G-only, |
- | wwan.x.password | + | 3G-only, |
- | wwan.x.apn | + | 3G-first, |
+ | 4G-only, | ||
+ | 4G-first | ||
+ | |||
+ | wwan.x.autoconn integer (0 = disabled, 1 = enabled) | ||
+ | wwan.x.number | ||
+ | wwan.x.username | ||
+ | wwan.x.password | ||
+ | wwan.x.apn | ||
wwan.x.auth | wwan.x.auth | ||
2 = CHAP, 3 = PAP+CHAP | 2 = CHAP, 3 = PAP+CHAP | ||
wwan.x.hdrcomp | wwan.x.hdrcomp | ||
wwan.x.softcomp | wwan.x.softcomp | ||
- | wwan.x.address | + | wwan.x.address |
wwan.x.isdn | wwan.x.isdn | ||
wwan.x.negdns | wwan.x.negdns | ||
Line 153: | Line 188: | ||
wwan.x.maxfail | wwan.x.maxfail | ||
wwan.x.homeonly | wwan.x.homeonly | ||
+ | wwan.x.maxattempts | ||
wwan.x.mtu | wwan.x.mtu | ||
+ | wwan.x.protocoll_mode adresstype ipv4, | ||
# USB | # USB | ||
Line 161: | Line 198: | ||
autorun.status | autorun.status | ||
autorun.authdev | autorun.authdev | ||
+ | autorun.password password | ||
usb.devices.x.dev | usb.devices.x.dev | ||
Line 177: | Line 215: | ||
network.br.x.gateway | network.br.x.gateway | ||
network.br.x.proxyarp | network.br.x.proxyarp | ||
+ | network.br.x.mac | ||
+ | network.br.x.stp | ||
+ | network.br.x.rstp | ||
# Ethernet | # Ethernet | ||
network.link.x.mode | network.link.x.mode | ||
Line 197: | Line 237: | ||
# Ethernet Briding | # Ethernet Briding | ||
ethernet.bridge.firewall | ethernet.bridge.firewall | ||
+ | ethernet.bridge.stp integer 0 = disabled, 1 = enabled Ethernet bridge STP | ||
ethernet.bridge.rstp | ethernet.bridge.rstp | ||
+ | #Serdes Configuration | ||
+ | ethernet.serdes integer | ||
+ | | ||
# WLAN | # WLAN | ||
wlan.x.status | wlan.x.status | ||
Line 205: | Line 249: | ||
wlan.x.regdom | wlan.x.regdom | ||
wlan.x.antgain | wlan.x.antgain | ||
+ | wlan.x.txpower integer 20 dBm (max. EIRP) WLAN EIRP | ||
wlan.x.settings.hwmode | wlan.x.settings.hwmode | ||
wlan.x.settings.band | wlan.x.settings.band | ||
wlan.x.settings.channel | wlan.x.settings.channel | ||
+ | wlan.x.settings.scanchannels | ||
wlan.x.settings.bandwidth | wlan.x.settings.bandwidth | ||
+ | wlan.x.settings.sgi | ||
+ | wlan.x.settings.outdoor | ||
+ | wlan.x.settings.sticky | ||
+ | wlan.x.settings.newbssidcalc | ||
+ | wlan.x.settings.tracking.status | ||
+ | wlan.x.settings.tracking.count | ||
wlan.x.ac.0.host | wlan.x.ac.0.host | ||
wlan.x.ac.1.host | wlan.x.ac.1.host | ||
+ | wlan.o.swencrypt integer | ||
# WLAN Clients | # WLAN Clients | ||
wlan.x.client.y.ssid | wlan.x.client.y.ssid | ||
- | wlan.x.client.y.secmode | + | wlan.x.client.y.secmode |
- | wpa-radius, | + | wpa-radius, |
- | wlan.x.client.y.secproto | + | |
+ | wlan.x.client.y.secproto | ||
+ | |||
wlan.x.client.y.cipher | wlan.x.client.y.cipher | ||
+ | wlan.x.client.y.sslciphers | ||
wlan.x.client.y.psk | wlan.x.client.y.psk | ||
wlan.x.client.y.minrssi | wlan.x.client.y.minrssi | ||
Line 224: | Line 281: | ||
wlan.x.client.y.prio | wlan.x.client.y.prio | ||
wlan.x.client.y.pmf | wlan.x.client.y.pmf | ||
+ | wlan.x.client.y.tlsv | ||
+ | wlan.x.client.y.ft | ||
+ | wlan.x.client.y.scan.bg.threshold | ||
+ | wlan.x.client.y.scan.bg.longinterval | ||
+ | wlan.x.client.y.scan.bg.shortinterval | ||
# WLAN Access Points | # WLAN Access Points | ||
Line 234: | Line 296: | ||
wlan.x.vss.y.secmode | wlan.x.vss.y.secmode | ||
wlan.x.vss.y.secproto | wlan.x.vss.y.secproto | ||
- | wlan.x.vss.y.cipher | + | wlan.x.vss.y.cipher |
wlan.x.vss.y.psk | wlan.x.vss.y.psk | ||
wlan.x.vss.y.acct | wlan.x.vss.y.acct | ||
wlan.x.vss.y.pmf | wlan.x.vss.y.pmf | ||
wlan.x.vss.y.addr4 | wlan.x.vss.y.addr4 | ||
+ | wlan.x.vss.y.iapp | ||
+ | wlan.x.vss.y.preauth | ||
+ | wlan.x.vss.y.fast.status | ||
+ | wlan.x.vss.y.fast.mobility | ||
+ | wlan.x.vss.y.fast.only | ||
+ | wlan.x.vss.y.fast.key | ||
+ | wlan.x.vss.y.bandsteering | ||
+ | wlan.x.vss.y.owe.transition | ||
+ | |||
+ | |||
+ | #Mesh | ||
+ | wlan.x.mesh.y.status integer | ||
+ | wlan.x.mesh.y.meshid | ||
+ | wlan.x.mesh.y.secmode | ||
+ | wlan.x.mesh.y.psk | ||
+ | wlan.x.mesh.y.pmf integer | ||
+ | wlan.x.mesh.y.gate integer | ||
# Bluetooth | # Bluetooth | ||
Line 246: | Line 325: | ||
can.x.status | can.x.status | ||
can.x.bitrate | can.x.bitrate | ||
+ | can.x.termination integer | ||
+ | |||
+ | #CLI-PHP | ||
+ | cliphp.status integer | ||
# VLAN | # VLAN | ||
Line 271: | Line 354: | ||
network.lan.x.alias.y.netmask | network.lan.x.alias.y.netmask | ||
network.lan.x.proxyarp | network.lan.x.proxyarp | ||
+ | network.lan.mac | ||
+ | network.lan.stp | ||
# WLAN Interfaces (IP) | # WLAN Interfaces (IP) | ||
Line 289: | Line 374: | ||
network.wan.x.dns0 | network.wan.x.dns0 | ||
network.wan.x.dns1 | network.wan.x.dns1 | ||
+ | network.wan.x.mac adress | ||
network.wan.x.username | network.wan.x.username | ||
network.wan.x.password | network.wan.x.password | ||
network.wan.x.service | network.wan.x.service | ||
network.wan.x.ac | network.wan.x.ac | ||
+ | network.wan.x.ipv6.mode | ||
+ | network.wan.x.ipv6.adress | ||
+ | network.wan.x.ipv6.prefix_length | ||
network.wan.x.mtu | network.wan.x.mtu | ||
Line 327: | Line 416: | ||
network.dhcp.hosts.x.port | network.dhcp.hosts.x.port | ||
network.dhcp.hosts.x.name | network.dhcp.hosts.x.name | ||
+ | network.dhcp.x.options.y.key | ||
+ | network.dhcp.x.options.y.value | ||
# NTP | # NTP | ||
Line 332: | Line 423: | ||
network.ntp.server0 | network.ntp.server0 | ||
network.ntp.server1 | network.ntp.server1 | ||
+ | network.ntp.preferred integer | ||
network.ntp.ping | network.ntp.ping | ||
network.ntp.interval | network.ntp.interval | ||
network.ntp.gpstime | network.ntp.gpstime | ||
+ | network.ntp.stratum integer | ||
+ | network.ntp.maxdistance | ||
network.ntp.access.x.address | network.ntp.access.x.address | ||
network.ntp.access.x.netmask | network.ntp.access.x.netmask | ||
Line 349: | Line 443: | ||
wanlink.0.options | wanlink.0.options | ||
wanlink.0.brdev | wanlink.0.brdev | ||
+ | wanlink.x.threshold.dial | ||
wanlink.0.passthru.interface | wanlink.0.passthru.interface | ||
wanlink.0.passthru.network | wanlink.0.passthru.network | ||
Line 356: | Line 451: | ||
qos.status | qos.status | ||
- | qos.interface.x.name | + | qos.interface.x.name |
qos.interface.x.cong | qos.interface.x.cong | ||
qos.interface.x.type | qos.interface.x.type | ||
- | qos.interface.x.uprate | + | qos.interface.x.uprate |
- | qos.interface.x.downrate | + | qos.interface.x.downrate |
- | qos.interface.x.pingip.primary | + | qos.interface.x.pingip.primary |
- | qos.interface.x.pingip.secondary address | + | qos.interface.x.pingip.secondary address |
- | qos.queue.0.desc | + | qos.queue.0.desc |
+ | regex: 0-9, | ||
qos.queue.0.direction | qos.queue.0.direction | ||
- | qos.queue.0.limit | + | qos.queue.0.limit |
qos.queue.0.interface | qos.queue.0.interface | ||
qos.queue.0.prio | qos.queue.0.prio | ||
Line 459: | Line 555: | ||
AES-128-CFB1, | AES-128-CFB1, | ||
AES-128-CFB8, | AES-128-CFB8, | ||
+ | AES-128-GCM, | ||
AES-128-OFB, | AES-128-OFB, | ||
AES-192-CBC, | AES-192-CBC, | ||
Line 464: | Line 561: | ||
AES-192-CFB1, | AES-192-CFB1, | ||
AES-192-CFB8, | AES-192-CFB8, | ||
+ | AES-192-GCM, | ||
AES-192-OFB, | AES-192-OFB, | ||
AES-256-CBC, | AES-256-CBC, | ||
Line 469: | Line 567: | ||
AES-256-CFB1, | AES-256-CFB1, | ||
AES-256-CFB8, | AES-256-CFB8, | ||
+ | AES-256-GCM, | ||
AES-256-OFB, | AES-256-OFB, | ||
+ | ARIA-128-CBC, | ||
+ | ARIA-128-CFB, | ||
+ | ARIA-128-CFB1, | ||
+ | ARIA-128-CFB8, | ||
+ | ARIA-128-GCM, | ||
+ | ARIA-128-OFB, | ||
+ | ARIA-192-CBC, | ||
+ | ARIA-192-CFB, | ||
+ | ARIA-192-CFB1, | ||
+ | ARIA-192-CFB8, | ||
+ | ARIA-192-GCM, | ||
+ | ARIA-192-OFB, | ||
+ | ARIA-256-CBC, | ||
+ | ARIA-256-CFB, | ||
+ | ARIA-256-CFB1, | ||
+ | ARIA-256-CFB8, | ||
+ | ARIA-256-GCM, | ||
+ | ARIA-256-OFB, | ||
+ | CAMELLIA-128-CBC, | ||
+ | CAMELLIA-128-CFB, | ||
+ | CAMELLIA-128-CFB1, | ||
+ | CAMELLIA-128-CFB8, | ||
+ | CAMELLIA-128-OFB, | ||
+ | CAMELLIA-192-CBC, | ||
+ | CAMELLIA-192-CFB, | ||
+ | CAMELLIA-192-CFB1, | ||
+ | CAMELLIA-192-CFB8, | ||
+ | CAMELLIA-192-OFB, | ||
+ | CAMELLIA-256-CBC, | ||
+ | CAMELLIA-256-CFB, | ||
+ | CAMELLIA-256-CFB1, | ||
+ | CAMELLIA-256-CFB8, | ||
+ | CAMELLIA-256-OFB, | ||
SEED-CBC, | SEED-CBC, | ||
SEED-CFB, | SEED-CFB, | ||
SEED-OFB, | SEED-OFB, | ||
+ | SM4-CBC, | ||
+ | SM4-CFB, | ||
+ | SM4-OFB, | ||
BF-CBC, | BF-CBC, | ||
BF-CFB, | BF-CFB, | ||
Line 493: | Line 628: | ||
DES-OFB, | DES-OFB, | ||
DESX-CBC, | DESX-CBC, | ||
+ | IDEA-CBC, | ||
+ | IDEA-CFB, | ||
+ | IDEA-OFB, | ||
RC2-40-CBC, | RC2-40-CBC, | ||
RC2-64-CBC, | RC2-64-CBC, | ||
Line 504: | Line 642: | ||
SHA1, | SHA1, | ||
RSA-SHA1, | RSA-SHA1, | ||
- | DSA-SHA1-old, | + | MDC2, |
- | DSA-SHA1, | + | RSA-MDC2, |
- | RSA-SHA1-2, | + | MD5-Sha1, |
- | | + | RSA-SHA1-2, |
- | | + | RIPEMD160, |
RSA-RIPEMD160, | RSA-RIPEMD160, | ||
MD4, | MD4, | ||
Line 521: | Line 659: | ||
SHA512, | SHA512, | ||
SHA224, | SHA224, | ||
- | whirlpool | + | whirlpool, |
+ | BLAKE2B512, | ||
+ | BLAKE2S256, | ||
+ | SHA512-224, | ||
+ | SHA512-256, | ||
+ | SHA3-224, | ||
+ | SHA3-256, | ||
+ | SHA3-384, | ||
+ | SHA3-512, | ||
+ | SHAKE128, | ||
+ | SHAKE256, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-244, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-256, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-384, | ||
+ | ID-RSASSA-PKCS1-V1_5-WITH-SHA3-512, | ||
+ | SM3, | ||
+ | RSA-SM3, | ||
+ | RSA-SHA512/ | ||
+ | RSA-SHA512/ | ||
openvpn.tunnel.x.keepalive | openvpn.tunnel.x.keepalive | ||
Line 530: | Line 686: | ||
openvpn.tunnel.x.mtu | openvpn.tunnel.x.mtu | ||
openvpn.tunnel.x.duplicates | openvpn.tunnel.x.duplicates | ||
+ | openvpn.tunnel.x.serverpushed integer | ||
+ | #OpenVPN routes | ||
openvpn.server.network.address | openvpn.server.network.address | ||
openvpn.server.network.netmask | openvpn.server.network.netmask | ||
Line 548: | Line 706: | ||
ipsec.status | ipsec.status | ||
ipsec.ike.nattraversal | ipsec.ike.nattraversal | ||
+ | ipsec.makebeforebreak integer 0 = disable, | ||
ipsec.restartonlinkchange | ipsec.restartonlinkchange | ||
+ | ipsec.0.status integer 0 = disabled, 1 = enabled | ||
+ | ipsec.0.crlfetcher.enable integer 0 = disable, 1 = enable IPsec config mode | ||
+ | ipsec.0.local.ip address IPsec tunnel local | ||
ipsec.x.remote.serverIp | ipsec.x.remote.serverIp | ||
ipsec.x.mode | ipsec.x.mode | ||
Line 557: | Line 719: | ||
ipsec.x.ike.psk | ipsec.x.ike.psk | ||
ipsec.x.ike.keyexchange | ipsec.x.ike.keyexchange | ||
- | ipsec.x.ike.username | + | ipsec.x.ike.username |
- | ipsec.x.ike.userpass | + | ipsec.x.ike.userpass |
- | ipsec.x.ike.groupname | + | ipsec.x.ike.groupname |
- | ipsec.x.ike.grouppass | + | ipsec.x.ike.grouppass |
ipsec.x.ike.mode | ipsec.x.ike.mode | ||
ipsec.x.ike.encryption | ipsec.x.ike.encryption | ||
Line 605: | Line 767: | ||
ecp512bp, | ecp512bp, | ||
- | ipsec.x.ike.localId | + | ipsec.x.ike.localId |
- | ipsec.x.ike.localIdType | + | localIPtype=USER_FQDN: |
- | ipsec.x.ike.remoteId | + | localIPtype=else : passwd format |
+ | |||
+ | ipsec.x.ike.localIdType | ||
+ | ipsec.x.ike.remoteId | ||
+ | remoteIPtype=USER_FQDN: | ||
+ | remoteIPtype=else : passwd format | ||
ipsec.x.ike.remoteIdType | ipsec.x.ike.remoteIdType | ||
ipsec.x.ike.lifetime | ipsec.x.ike.lifetime | ||
Line 688: | Line 855: | ||
gre.tunnel.x.remote.netmask | gre.tunnel.x.remote.netmask | ||
gre.tunnel.x.brdev | gre.tunnel.x.brdev | ||
+ | gre.tunnel.x.key integer range 0...2147483647 GRE tunnel key | ||
+ | |||
# PPTP | # PPTP | ||
- | pptp.status | + | pptp.status |
- | pptp.server.listen | + | pptp.server.listen |
- | pptp.server.address | + | pptp.server.address |
- | pptp.server.start | + | pptp.server.start |
- | pptp.server.end | + | pptp.server.end |
- | pptp.server.client.x.username | + | pptp.server.client.x.username |
- | pptp.server.client.x.password | + | pptp.server.client.x.password |
- | pptp.server.client.x.address | + | username and password must not contain apostrophes and double apostrophes (also not empty) |
+ | |||
+ | pptp.server.client.x.address | ||
pptp.tunnel.x.mode | pptp.tunnel.x.mode | ||
pptp.tunnel.x.address | pptp.tunnel.x.address | ||
- | pptp.tunnel.x.username | + | pptp.tunnel.x.username |
- | pptp.tunnel.x.password | + | |
+ | pptp.tunnel.x.password | ||
+ | | ||
+ | #VLAN | ||
+ | vxlan.x.status | ||
+ | vxlan.x.id | ||
+ | vxlan.x.remote | ||
+ | vxlan.x.dport | ||
+ | vxlan.x.local | ||
+ | vxlan.x.brdev | ||
+ | |||
+ | #L2TP | ||
+ | l2tp.tunnel.x.status integer disabled = 0, enabled = 1 | ||
+ | l2tp.tunnel.x.encap protocol IP, | ||
+ | l2tp.tunnel.x.local.local.address address IP im Standardformat | ||
+ | l2tp.tunnel.x.local.local.tunid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.local.local.sessionid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.local.udp_port integer 1...65535 | ||
+ | l2tp.tunnel.x.local.cookie hex länge nicht 0,8,16 | ||
+ | l2tp.tunnel.x.remote.address address IP im Standardformat | ||
+ | l2tp.tunnel.x.remote.tunid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.remote.sessionid integer 0...4294967295 | ||
+ | l2tp.tunnel.x.remote.udp_port integer 1...65535 | ||
+ | l2tp.tunnel.x.remote.cookie hex länge nicht 0,8,16 | ||
+ | l2tp.tunnel.x.brdev enum LANx, | ||
+ | l2tp.tunnel.x.mtu integer 1...9000 | ||
# Dial-In | # Dial-In | ||
Line 738: | Line 934: | ||
napt.x.intHost | napt.x.intHost | ||
napt.x.intMask | napt.x.intMask | ||
+ | |||
+ | napt.conntrack.udp.timeout integer | ||
+ | napt.conntrack.udp.streamtimeout integer | ||
# NAPT Inbound Rule | # NAPT Inbound Rule | ||
Line 756: | Line 955: | ||
napt.rule.x.intMask | napt.rule.x.intMask | ||
napt.rule.x.intPort | napt.rule.x.intPort | ||
+ | napt.rule.x.srcPort.start | ||
+ | napt.rule.x.srcPort.end | ||
+ | napt.rule.x.dstPort.start | ||
+ | napt.rule.x.dstPort.end | ||
# NAPT Outbound Rule | # NAPT Outbound Rule | ||
Line 839: | Line 1042: | ||
surveyor.ignition.status | surveyor.ignition.status | ||
surveyor.ignition.hold | surveyor.ignition.hold | ||
+ | surveyor.ignition.shutdown integer | ||
# Voice | # Voice | ||
Line 848: | Line 1052: | ||
voice.sip.port | voice.sip.port | ||
voice.sip.expires | voice.sip.expires | ||
+ | voice.fxs.status integer | ||
+ | voice.fxs.pass | ||
voice.endpoint.x.type | voice.endpoint.x.type | ||
Line 879: | Line 1085: | ||
snmp.status | snmp.status | ||
snmp.mode | snmp.mode | ||
- | snmp.port | + | snmp.engine.id hex 12 < id(Zeichen) < 64 SNMP engineID |
+ | snmp.port | ||
snmp.community | snmp.community | ||
snmp.contact | snmp.contact | ||
Line 895: | Line 1102: | ||
lwm2m.agent.x.id | lwm2m.agent.x.id | ||
lwm2m.agent.x.key | lwm2m.agent.x.key | ||
+ | lwm2m.endpoint | ||
+ | lwm2m.agent.x.lifetime integer | ||
+ | |||
+ | #ITxPT | ||
+ | itxpt.status | ||
+ | itxpt.network.interface | ||
+ | itxpt.fmstoip.enabled | ||
+ | itxpt.fmstoip.period | ||
+ | itxpt.fmstoip.can.interface | ||
+ | itxpt.fmstoip.can.db.extensions | ||
+ | itxpt.fmstoip.can.db.dl.path | ||
+ | itxpt.fmstoip.can.db.dl.selection | ||
+ | itxpt.fmstoip.can.db.manufacturer.file | ||
+ | itxpt.fmstoip.can.db.manufacturer.selected | ||
+ | itxpt.gnss.enabled | ||
+ | itxpt.vtoip.enabled | ||
+ | itxpt.time.enabled | ||
+ | itxpt.mqtt.enabled | ||
# GNSS | # GNSS | ||
- | gpsd.x.status | + | gpsd.x.status |
gpsd.x.mode | gpsd.x.mode | ||
gpsd.x.atype | gpsd.x.atype | ||
Line 914: | Line 1139: | ||
gpsd.x.ftimeout | gpsd.x.ftimeout | ||
1..300 seconds | 1..300 seconds | ||
+ | |||
+ | |||
+ | gpsd.x.modifynmea integer | ||
+ | gpsd.x.dr.eabled integer | ||
+ | gpsd.x.cfg.yaw | ||
+ | gpsd.x.cfg.pitch | ||
+ | gpsd.x.cfg.roll | ||
+ | gspd.x.cfg.vrp2antenna.a | ||
+ | gspd.x.cfg.vrp2antenna.b | ||
+ | gspd.x.cfg.vrp2antenna.c | ||
+ | gpsd.x.cfg.vrp2imu.a | ||
+ | gpsd.x.cfg.vrp2imu.b | ||
+ | gpsd.x.cfg.vrp2imu.c | ||
+ | gpsd.x.assisturl0 | ||
+ | gpsd.x.assisturl1 | ||
+ | gpsd.x.dr.ignition integer | ||
# DIO | # DIO | ||
Line 921: | Line 1162: | ||
# Administration | # Administration | ||
admin.password | admin.password | ||
+ | admin.store_pw integer | ||
+ | admin.hash | ||
admin.bootpass | admin.bootpass | ||
admin.shell | admin.shell | ||
+ | admincliphp integer | ||
admin.access | admin.access | ||
1 = authentication required, | 1 = authentication required, | ||
Line 940: | Line 1184: | ||
1 = left/ | 1 = left/ | ||
2 = both (toggle mode) | 2 = both (toggle mode) | ||
+ | |||
+ | | ||
+ | led.x.left | ||
+ | led.x.right | ||
# reboot | # reboot | ||
Line 948: | Line 1196: | ||
user.x.role | user.x.role | ||
user.x.password | user.x.password | ||
+ | user.x.store_pw integer | ||
+ | user.x.hash | ||
user.x.desc | user.x.desc | ||
user.x.shell | user.x.shell | ||
+ | user.x.cliphap integer | ||
+ | |||
# Remote Authentication | # Remote Authentication | ||
Line 956: | Line 1208: | ||
1 = use for login | 1 = use for login | ||
radius.server | radius.server | ||
+ | radius.server2 | ||
radius.secret | radius.secret | ||
+ | radius.secret2 | ||
radius.authport | radius.authport | ||
+ | radius.authport2 | ||
radius.acctport | radius.acctport | ||
+ | radius.acctport2 | ||
+ | |||
# SMS daemon | # SMS daemon | ||
smsd.status | smsd.status | ||
smsd.report | smsd.report | ||
+ | smsd.x.burst | ||
smsd.x.device | smsd.x.device | ||
smsd.x.gateway | smsd.x.gateway | ||
Line 1070: | Line 1328: | ||
ospf.interface.x.cost | ospf.interface.x.cost | ||
ospf.interface.x.passive | ospf.interface.x.passive | ||
+ | ospf.router.id | ||
ospf.network.x.prefix | ospf.network.x.prefix | ||
Line 1077: | Line 1336: | ||
# BGP | # BGP | ||
bgp.status | bgp.status | ||
+ | bgp.router.id | ||
bgp.as | bgp.as | ||
bgp.redist.connected | bgp.redist.connected | ||
Line 1082: | Line 1342: | ||
bgp.redist.ospf | bgp.redist.ospf | ||
bgp.vrrpmasteronly | bgp.vrrpmasteronly | ||
+ | bgp.keepalive integer | ||
+ | bgp.holddown integer | ||
bgp.neighbor.x.addr | bgp.neighbor.x.addr | ||
bgp.neighbor.x.as | bgp.neighbor.x.as | ||
+ | bgp.neighbor.x.weight | ||
bgp.neighbor.x.password | bgp.neighbor.x.password | ||
bgp.neighbor.x.multihop | bgp.neighbor.x.multihop | ||
+ | bgp.neighbor.x.extended_nexthop | ||
+ | bgp.neighbor.x.address_family | ||
bgp.network.0.prefix | bgp.network.0.prefix | ||
Line 1129: | Line 1394: | ||
telnet.status | telnet.status | ||
telnet.port | telnet.port | ||
+ | |||
+ | # MQTT Broker | ||
+ | mqtt.status integer | ||
+ | mqtt.port integer | ||
+ | mqtt.tls integer | ||
# Web Server | # Web Server | ||
Line 1157: | Line 1427: | ||
serial.server.x.protocol | serial.server.x.protocol | ||
+ | serial.server.x.termination integer | ||
serial.server.x.port | serial.server.x.port | ||
serial.server.x.timeout | serial.server.x.timeout | ||
Line 1164: | Line 1435: | ||
serial.server.x.banner | serial.server.x.banner | ||
- | serial.server.x.modem | + | serial.server.x.modem |
+ | serial.server.x.phonebook.y.number | ||
+ | serial.server.x.phonebook.y.ip | ||
+ | serial.server.x.phonebook.y.port | ||
+ | |||
# Audio | # Audio | ||
audio.x.volume | audio.x.volume | ||
Line 1196: | Line 1470: | ||
lldp, cdp, sonmp, edp, fdp, irdp | lldp, cdp, sonmp, edp, fdp, irdp | ||
+ | |||
+ | |||
+ | |||
+ | vrrpd.x.status | ||
+ | vrrpd.x.id | ||
+ | vrrpd.x.prio | ||
+ | vrrpd.x.interface | ||
+ | vrrpd.x.address | ||
# IGMP Proxy | # IGMP Proxy | ||
Line 1213: | Line 1495: | ||
smcroute.x.to | smcroute.x.to | ||
+ | # Softflow | ||
+ | softflow.x.status | ||
+ | softflow.x.interface | ||
+ | softflow.x.host | ||
+ | softflow.x.port | ||
+ | softflow.x.version | ||
+ | softflow.x.maxflow | ||
+ | softflow.x.tracklevel | ||
+ | softflow.x.samplerate | ||
+ | | ||
# ARP | # ARP | ||
arp.x.interface | arp.x.interface | ||
Line 1235: | Line 1527: | ||
sdk.sched | sdk.sched | ||
sdk.watchdog | sdk.watchdog | ||
+ | sdk.maxvsz integer | ||
- | sdk.trigger.x.name | + | sdk.trigger.x.name |
sdk.trigger.x.timecond | sdk.trigger.x.timecond | ||
workdays, | workdays, | ||
Line 1292: | Line 1585: | ||
test | test | ||
- | sdk.script.0.name | + | sdk.script.0.name |
- | sdk.script.0.desc | + | sdk.script.0.desc |
sdk.script.0.args | sdk.script.0.args | ||
- | sdk.job.0.name | + | sdk.job.0.name |
- | sdk.job.0.trigger | + | sdk.job.0.trigger |
- | sdk.job.0.script | + | sdk.job.0.script |
sdk.job.0.args | sdk.job.0.args | ||
+ | regex für args:a-z, A-Z, 0-9, | ||
# Virtualization | # Virtualization | ||
virt.status | virt.status | ||
Line 1319: | Line 1612: | ||
virt.guest.x.device.y.name | virt.guest.x.device.y.name | ||
virt.guest.x.device.y.type | virt.guest.x.device.y.type | ||
+ | |||
+ | virt.guest.x.install.url URL https:// | ||
+ | / | ||
+ | virt.guest.x.install.trigger integer 0 = disabled, 1 = enabled Install on Apply | ||
+ | |||
+ | #storage | ||
+ | storage.flashroot.id | ||
+ | storage.flashroot.automount | ||
+ | storage.flashroot.mountpoint | ||
+ | |||
+ | storage.flashstorage.id | ||
+ | storage.flashstorage.automount | ||
+ | storage.flashstorage.mountpoint | ||
+ | |||
+ | storage.extended.id | ||
+ | storage.extended.automount | ||
+ | storage.extended.mountpoint | ||
+ | |||
+ | storage.usb0.id | ||
+ | storage.usb0.automount | ||
+ | storage.usb0.mountpoint | ||
+ | |||
+ | storage.sdcard0.id | ||
+ | storage.sdcard0.automount | ||
+ | storage.sdcard0.mountpoint | ||
# custom | # custom | ||
Line 1347: | Line 1665: | ||
custom.table2.0.var4 | custom.table2.0.var4 | ||
+ | |||
+ | checkEmail: format local@domain, | ||
+ | ApnUsername=ApnPassword: | ||
+ | Passwd: not allowed &, | ||
</ | </ |