Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
coova-chilli-standalone [2015/04/16 07:46] – [Installation] hesscoova-chilli-standalone [2026/10/20 13:18] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-====== Coova Chilli Standalone ====== 
-===== Features ===== 
-==== Standalone Coova Chilli Captive Portal ==== 
-In Services->Hotspot you can enable the Coova Chilli standalone Captive Portal 
-With this Captive Portal every WLAN client need to accept the "terms of service" before acces to 
-the internet will be granted. This feature is enabled by default on this patchimage. 
-==== OEM Configuration ==== 
-This patchrelease is equipped with a preconfigured OEM configuration. The configuration is a good 
-starting point for the hotspot service.. 
-Please keep mind that the OEM preconfiguration will delete the current config on your device and apply the OEM Configuration. 
- 
-==== Download ==== 
-  * [[ ftp://share.netmodule.com/router/public/system-software/alternative/coova/| PWLAN standalone image ]]  
- 
-===== Installation ===== 
-The following section describes the steps you need to execute to have the Coova Chilli WLAN Hotspot running. 
-Please do not install this image if you are not connected directly via ethernet to the router. You will loose any remote access during the installation. 
- 
-  - Visit the web manager and set your administration password 
-      * After connecting your PC to the router via ethernt you should get an ip address from the 192.168.1.0/24 range. Please visit the website http://192.168.1.1:8080 and set your administration password 
-  - WWAN Link installation 
-      * Please configure your WWAN Connection according to the needs of your SIM Card. If this step is successfull you will see a steady Mob1 LED on the front of the router. 
-  - Enable Hotspot Service 
-      * Please enable the Hotspot Service under Services->Hotspot. From now on every WLAN Client will see a landing page with the default terms of service before getting access to the internet. See Figure 1 and Figure 2. 
-  - Checking the Captive Portal 
-      * Please connect to the WLAN "coovachilli" with a WLAN Client (laptop, smartphone or tablet). Depending on your client device you will get the entry page directly. In most cases you will need to request a webpage with your browser to get the entry page. On this page you need to accept the "terms of service" before you will be forwarded to the Webpage you requested. 
- 
-{{ :coova1.png?nolink&600 | Hotspot service page}} 
-{{ :coova2.png?nolink&600 | Hotspot service page enabled}} 
- 
- 
-===== Customizing the Landing Page ===== 
-==== Download the example package ==== 
-To use your own landing page, please take a look at the example you can find on the on the 
-Services->Hotspot Page after you enabled the Custom Landing Page. The Hotspotservice need to 
-be enabled to get the example file. See Figure 3. 
-==== Use the example package ==== 
-After you downloaded the example packe you can use it directly by uploading it with the with the 
-"Browse" Button. After you choose the the example package and pressed apply you will see the 
-logo on the landing pages changed from the cooca chilli to the netmodule logo. 
-See Figure 4. 
-==== Customize the example pages ==== 
-Please extracted the files from the example package. Based on this files you can customize every 
-page used for a new wlan client. 
-Be aware to not change the filename of the files included. The hotspot service relies on this file 
-names. 
-The files are used as follows: 
-  * coova.html is the first page the WLAN client will see after requesting a webpage, redirecting to the real landing page 
-  * terms.tmpl is the landing page it self, where the user have to accept the terms of service 
-  * login_sucess.tmpl is the success page after accepting the terms of service and will redirect the user to the page requested at the beginning. 
-  * logo.jpg is just an example image you can exchange this as you like. 
-Every page is basicly a html page with a few lines of javascript for the redirection. You can edit them 
-as you need. 
-==== Handling Errors ==== 
-If you got stock with an error during editing your landing pages you it is passobile to download the 
-example again. Also you can always save the current state of your langind pages from the Hotspot 
-service page. 
-If you like to install a newer version of your custom langing pages please erase the installed version 
-first. See 4. 
- 
-{{ :coova3.png?nolink&600 |}} 
-{{ :coova4.png?nolink&600 |}}