Differences

This shows you the differences between two versions of the page.

--- configuration:wlan-client-bridge [2020/06/04 05:46] – [WLAN Client Bridge] dodenhoeft
+++ configuration:wlan-client-bridge [2021/11/08 14:37] – [Other HowTos] dodenhoeft
@@ Line 2: / Line 2: @@
-To bridge a WLAN Client connection with a ethernet LAN there are some requierments needed.
+To bridge a WLAN Client connection with a Ethernet LAN there are some requirements needed.
-The Wifi Access Point as well as the wifi clients need to support 4 Address Frame. The configurtion is only possible with the following products:
+The WiFi Access Point as well as the WiFi clients need to support 4 Address Frame. The configurtion is only possible with the following products:
   * NB1800
@@ Line 17: / Line 17: @@
   * NB3800
-Please use the current Version: [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.106/|4.3.0.106]]. This funtionality was introduced with the NRSW 4.1.0.100.
+Please use the current Version: [[https://share.netmodule.com/public/system-software/4.3/4.3.0.106/|4.3.0.106]]. This funtionality was introduced with the NRSW 4.1.0.100.
 In case you running a NB800 or NB1601 you can take a look at our [[configuration:mesh-point|Mesh Network]] funtionality
@@ Line 43: / Line 43: @@
 {{ :configuration:screenshot_-_07042017_-_05_26_10_pm.png?nolink |}}
 {{ :configuration:screenshot_-_07042017_-_05_26_18_pm.png?nolink |}}
+==== Activating the CLient Bridge ====
 After the WLAN Connection is set up. Please go to Interfaces->Link Managment and edit your WLAN Connection
@@ Line 50: / Line 53: @@
 {{ :configuration:screenshot_-_07042017_-_05_26_29_pm.png?nolink |}}
 {{ :configuration:screenshot_-_07042017_-_05_26_40_pm.png?nolink |}}
+----
+===== Other HowTos =====
+[[configuration:mesh-point|Mesh Network]]

User Tools

Site Tools

Differences

Page Tools