Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
configuration:wlan-client-bridge [2018/07/17 12:20]
preisig
configuration:wlan-client-bridge [2020/06/15 10:44]
fachet
Line 1: Line 1:
 ====== WLAN Client Bridge ====== ====== WLAN Client Bridge ======
 +
  
 To bridge a WLAN Client connection with a Ethernet LAN there are some requierments needed. ​ To bridge a WLAN Client connection with a Ethernet LAN there are some requierments needed. ​
-The Wifi Access Point need to Support the 4 Address Frame, which the AP in Netmodule Router does.+The Wifi Access Point as well as the wifi clients ​need to support ​4 Address Frame. ​The configurtion is only possible with the following products:  
 + 
 +  * NB1800 
 +  * NB1810  
 +  * NB2700 
 +  * NB2710  
 +  * NB2800 
 +  * NB2810 
 +  * NB3700 
 +  * NB3701 
 +  * NB3710 
 +  * NB3711  
 +  * NB3800
  
-This Funtionality was introduced with the NRSW 4.1.0.100 so please ​use the current Version: [[ftp://​share.netmodule.com/​router/​public/​system-software/​4.1/4.1.0.100/​|4.1.0.100]]+Please ​use the current Version: [[ftp://​share.netmodule.com/​router/​public/​system-software/​4.3/4.3.0.106/|4.3.0.106]]. This funtionality was introduced with the NRSW 4.1.0.100
 +In case you running a NB800 or NB1601 you can take a look at our [[configuration:​mesh-point|Mesh Network]] funtionality ​