Differences

This shows you the differences between two versions of the page.

--- configuration:usb-serial-adapter [2017/09/18 11:21]
gray [Set up a USB device with a serial interface on an NB1600 router.]
+++ configuration:usb-serial-adapter [2017/09/18 12:13]
gray [set up the serial port]
@@ Line 3: / Line 3: @@
-In the information description, a USB adapter with an RS 232 interface for an NB 1600 is set up. The description leads through the setup of the USB adapter and the establishment of the serial interface. It also describes how to set the serial interfaces as client and server.
+In this page description to set up a USB adapter with a RS 232 interface for a NB1600. The description leads through the setup of the USB adapter and the establishment of the serial interface. It also describes how to set the serial interfaces as client and server.
+===== set up the USB device ===========
 In the web interface, you can  enable the tab "USB Administration" under the tab INTERFACES.
@@ Line 18: / Line 21: @@
 After confirming the entries, the serial interface is displayed under the item "Enabled USB Devices".
+==== set up the serial port ====
 {{:configuration:Enabled_USB_Devices_4.png?direct&900|}}
@@ Line 41: / Line 48: @@
 {{:configuration:Interfaces_device_server_9.png?direct&900|}}
+===== Login and Testing =====
 For testing, one can use the internal serial interface of the NB1600 and connect it to thea USB adapter. So with a device server and the login console will be forwarded