Differences

This shows you the differences between two versions of the page.

--- configuration:usb-autorun [2017/11/09 10:35] – juraschek
+++ configuration:usb-autorun [2021/11/11 14:30] (current) – [Useful USB autorun] dodenhoeft
@@ Line 12: / Line 12: @@
   - For running a script: ''autorun.sh''
-===== Example =====
+===== Example autorun.key =====
 <code - autorun.key>
 # corresponds to password in factory defaults
@@ Line 20: / Line 20: @@
 </code>
+===== Procedure =====
+The autorun feature need to be enabled. This is case case either in the factory state or when you have it enabled on purpose in the Config.
+  - Please do not plug in the USB Stick before the System is bootet completly (Status LED need to light steady green).
+  - After that pluging the USB Stick.
+  - If the Autorun was triggert correctly all LEDs need to flash GREEN at the same time
+===== Function is not always enabled =====
+Please keep in mind that the usb autorun function is not always enabled:
+  - It's enabled in Factory State until you define your admin password
+  - After that you need to enable it either via Webinterface or config parameter: ''autorun.status=1''
+===== Useful USB autorun =====
+  * [[configuration:firmware-update|Firmware update]]
+  * [[configuration:software-update|Software update]]
+  * [[configuration:config-update|Config update]]