Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
configuration:start [2019/10/31 14:01] fachet |
configuration:start [2024/02/22 14:46] (current) juraschek [Services] |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| You will find tips to configure the Routers optimal and be sure to take care of typical pitfalls | You will find tips to configure the Routers optimal and be sure to take care of typical pitfalls | ||
| - | * [[cs:start|Use NetModule Connectivity Suite]] | + | * [[connectivity-suite:start|Use NetModule Connectivity Suite]] |
| * [[faq:dyndns|Access the Router via Public IP]] | * [[faq:dyndns|Access the Router via Public IP]] | ||
| * [[config:link-supervision|Use the Linksupervison for a steady Connection]] | * [[config:link-supervision|Use the Linksupervison for a steady Connection]] | ||
| Line 19: | Line 19: | ||
| * [[cli-commands|CLI]] | * [[cli-commands|CLI]] | ||
| + | * [[configuration:gnss-dr|GNSS Dead Reckoning]] | ||
| * [[gpsd|GPS Daemon]] | * [[gpsd|GPS Daemon]] | ||
| - | * [[ipsec|IPsec]] | + | |
| - | * [[Initial Time|Initial Time]] | + | ===== WAN ===== |
| - | * [[gre|GRE]] | + | * [[vdsl|VDSL connection via SFP Modul]] |
| - | * [[gre-over-ipsec|GRE-Over-IPsec]] | + | * [[ipv6-support|IPv6 Support]] |
| - | * [[mobile-ip|Mobile IP]] | + | |
| - | * [[napt|NAPT]] | + | ===== LAN ===== |
| - | * [[1to1_nat| 1:1 Network Mapping]] | + | * [[custom-mac|Define custom MAC Adresses per Ethernet Interface]] |
| - | * [[openvpn|OpenVPN]] | + | * [[extend-ethernet-port-with-vlan|Create VLAN interfaces]] |
| - | * [[sms|SMS]] | + | |
| - | * [[configuration:sms-control|SMS Control]] | + | |
| - | * [[agent | SNMP Agent]] and [[mib|Management Information Base]] | + | ===== VPN ===== |
| - | * [[telnet-server | SSH/Telnet Server]] | + | *[[openvpn|OpenVPN]] |
| - | * [[usb-autorun|USB Autorun]] | + | *[[openvpn-net|OpenVPN.net Service]] |
| - | * [[faq:dyndns]|Can't access router via dyndns or NAT not working]] | + | *[[ipsec|IPsec]] |
| - | * {{:configuration:the_m2m_cook_book.pdf|All you need for remote access}} | {{:configuration:das_m2m_kochbuch.pdf|Alles was für den Fernzugriff benötigt wird}} | + | *[[gre|GRE]] |
| - | * {{:configuration:netmodule_remote_access_solutions.pdf|Remote access solutions}} | {{:configuration:netmodule_fernzugriff_loesungen.pdf|Lösungen für den Fernzugriff}} | + | *[[ipsec and l2tp|IPsec and L2TP]] |
| - | * [[configuration:QoS]|QoS]] | + | *[[gre-over-ipsec|GRE-Over-IPsec]] |
| - | * [[WLAN:Qick:Start|WLAN Quick Start]] | + | *[[telekom hotspot over IPsec|Telekom HOTSPOT over IPsec]] |
| - | * [[Redundancy|Redundancy/vrrp]] | + | *[[dualLTEdualOpenVPNdualVLAN|Separate VLANs on separate OpenVPN Tunnel]] |
| - | * [[configuration:IP pass-through|IP pass-through]] | + | ===== Firewall===== |
| - | * [[wlan-client-bridge|WLAN Client Bridge ]] | + | * [[napt|NAPT]] |
| - | * [[usb-serial-adapter|USB Serial Adapter on NB1600]] | + | * [[1to1_nat| 1:1 Network Mapping]] |
| - | * [[telephone-on-serial|The output of a telephone number on the serial interface]] | + | ===== Mobile ===== |
| + | * [[wwan-interface|WWAN Interface]] | ||
| + | * [[mobile-ip|Mobile IP]] | ||
| + | * [[dyndns|Dynamic DNS]] | ||
| + | * [[SSL Protected Webserver|SSL certified webserver]] | ||
| + | ===== WLAN ===== | ||
| + | * [[WLAN:Quick:Start|WLAN Quick Start]] | ||
| + | * [[wlan-client-bridge|WLAN Client Bridge ]] | ||
| + | * [[configuration:mesh-network|Mesh Network (meshpoint)]] | ||
| + | ===== Services ===== | ||
| + | * [[sms|SMS]] | ||
| + | * [[configuration:sms-control|SMS Control]] | ||
| + | * [[SDK Job|SDK Job Management]] | ||
| + | * [[telnet-server | SSH/Telnet Server]] | ||
| + | * [[usb-autorun|USB Autorun]] | ||
| + | * [[firmware-update|Firmware Update via USB]] | ||
| + | * [[software-update|Software Update via USB]] | ||
| + | * [[config-update|Config Update via USB]] | ||
| + | * [[usb-serial-adapter|USB Serial Adapter on NB1600]] | ||
| + | * [[telephone-on-serial|The output of a telephone number on the serial interface]] | ||
| + | * [[agent | SNMP Agent]] and [[mib|Management Information Base]] | ||
| + | * [[configuration:QoS]|QoS]] | ||
| + | * [[configuration:IP pass-through|IP pass-through]] | ||
| + | * [[Redundancy|Redundancy/vrrp]] | ||
| + | * [[Bluetooth Low Energy (BLE)| Bluetooth Low Energy (BLE)]] | ||
| + | * [[Ein Samba Server unter LXC| Ein Samba Server unter LXC]] | ||
| + | * [[Ein Node-RED Server unter einem LXC Container| Ein Node-RED Server unter einem LXC Container]] | ||
| + | * [[ein-mqtt-server-fuer-iot-telemetry-sensoren|Ein MQTT Server für IoT Telemetry Sensoren]] | ||
| + | * [[ein-smartmeter-auf-einem-lxc-container|Ein Smartmeter über Node-RED anbinden und das ganze im LXC Container]] | ||
| + | * [[configuration:iot-geraete-und-mqtt-server|IoT Geräte die Daten an ein MQTT Server verschicken]] | ||
| + | |||
| + | |||
| + | ===== Others ===== | ||
| + | * [[Initial Time|Initial Time]] | ||
| + | * {{:configuration:the_m2m_cook_book.pdf|All you need for remote access}} | {{:configuration:das_m2m_kochbuch.pdf|Alles was für den Fernzugriff benötigt wird}} | ||
| + | |||
| + | |||
| + | |||
| + | ===== FAQ ===== | ||
| + | |||
| + | |||
| + | * [[faq:dyndns]|Can't access router via dyndns or NAT not working]] | ||
| + | |||
| + | |||
| + | |||