Differences

This shows you the differences between two versions of the page.

--- configuration:mib [2015/05/19 12:32]
hess
+++ configuration:mib [2022/03/16 13:31] (current)
fachet
@@ Line 1: / Line 1: @@
 ====== Management Information Base (MIB) ======
-<code c mib.txt>
+<code c VENDOR-MIB.txt>
 -- ****************************************************************************
 -- NetModule AG VENDOR MIB
 --
 --
--- (c) COPYRIGHT 2014 by NetModule AG, Switzerland
+-- (c) COPYRIGHT 2022 by NetModule AG, Switzerland
 -- All rights reserved.
 --
@@ Line 19: / Line 19: @@
 IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-       Integer32, Counter32, Gauge32,
+       Integer32, Counter64, enterprises        FROM SNMPv2-SMI
-       Counter64, TimeTicks                     FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString,
-       PhysAddress, TruthValue, RowStatus,
+       DateAndTime                              FROM SNMPv2-TC
-       TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC
+       MODULE-COMPLIANCE, OBJECT-GROUP,
-       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+       NOTIFICATION-GROUP                       FROM SNMPv2-CONF
-       snmpTraps                                FROM SNMPv2-MIB
+       URLString                                FROM NETWORK-SERVICES-MIB;
-       URLString                                FROM NETWORK-SERVICES-MIB
-       enterprises                              FROM SNMPv2-SMI;
 -- ****************************************************************************
@@ Line 34: / Line 31: @@
 nb MODULE-IDENTITY
-        LAST-UPDATED "201405091000Z"
+        LAST-UPDATED "202103031200Z"
         ORGANIZATION "NetModule AG"
         CONTACT-INFO
@@ Line 40: / Line 37: @@
         DESCRIPTION
             "MIB module which defines the NB router specific entities"
+        REVISION "202103031200Z"
+        DESCRIPTION
+             "MIB for software release 4.5"
+        REVISION "202001130900Z"
+        DESCRIPTION
+             "MIB for software release 4.4"
+        REVISION "201910151045Z"
+        DESCRIPTION
+             "MIB for software release 4.4"
+        REVISION "201908051530Z"
+        DESCRIPTION
+             "MIB for software release 4.3"
+        REVISION "201908041530Z"
+        DESCRIPTION
+             "MIB for software release 4.2"
+        REVISION "201806261330Z"
+        DESCRIPTION
+             "MIB for software release 4.1"
+        REVISION "201610181200Z"
+        DESCRIPTION
+             "MIB for software release 4.0"
+        REVISION "201607121200Z"
+        DESCRIPTION
+             "MIB for software release 4.0"
+        REVISION "201603021200Z"
+        DESCRIPTION
+             "MIB for software release 3.9"
+        REVISION "201411241000Z"
+        DESCRIPTION
+             "MIB for software release 3.8"
         REVISION "201405091000Z"
@@ Line 47: / Line 84: @@
         REVISION "201212191000Z"
         DESCRIPTION
-            "MIB for software release 3.6"
+             "MIB for software release 3.6"
         ::= { netmodule 10 }
@@ Line 57: / Line 94: @@
 netmodule OBJECT IDENTIFIER ::= { enterprises 31496 }
+-- ****************************************************************************
+-- compliances and conformance
+-- ****************************************************************************
+nbConformance OBJECT IDENTIFIER ::= { nb 2 }
+nbCompliances OBJECT IDENTIFIER ::= { nbConformance 1 }
+nbGroups      OBJECT IDENTIFIER ::= { nbConformance 2 }
+nbCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for the nb MIB."
+      MODULE  -- this module
+          MANDATORY-GROUPS { nbAdminGroup,
+                             nbWwanGroup,
+                             nbGnssGroup,
+                             nbWlanGroup,
+                             nbWlanStationGroup,
+                             nbWanGroup,
+                             nbDioGroup,
+                             nbSerialGroup,
+                             nbEventGroup }
+    ::= { nbCompliances 1 }
 -- ****************************************************************************
@@ Line 62: / Line 123: @@
 -- ****************************************************************************
-system        OBJECT IDENTIFIER ::= { nb   1 }
+-- ::= { nb   1 } this OID is obsolete
-products      OBJECT IDENTIFIER ::= { nb  10 }
+-- ::= { nb  10 } this OID is obsolete
 admin         OBJECT IDENTIFIER ::= { nb  40 }
 dio           OBJECT IDENTIFIER ::= { nb  53 }
+sdk           OBJECT IDENTIFIER ::= { nb  90 }
 traps         OBJECT IDENTIFIER ::= { nb 100 }
+-- ****************************************************************************
+-- Textual-Conventions
 -- ****************************************************************************
-nb1600        OBJECT IDENTIFIER ::= { products 46 }
+FloatSyntax ::= TEXTUAL-CONVENTION
-nb2700        OBJECT IDENTIFIER ::= { products 47 }
+    DISPLAY-HINT "d-1"
-nb3700        OBJECT IDENTIFIER ::= { products 48 }
+    STATUS       current
-nb2710        OBJECT IDENTIFIER ::= { products 51 }
+    DESCRIPTION  "Fixed point, one decimal"
-nb3710        OBJECT IDENTIFIER ::= { products 52 }
+    SYNTAX       Integer32
-nb3720        OBJECT IDENTIFIER ::= { products 53 }
 -- ****************************************************************************
--- NBAdminTable
+-- nb groups
+-- ****************************************************************************
+nbAdminGroup OBJECT-GROUP
+    OBJECTS { swVersion,
+              kernelVersion,
+              serialNumber,
+              configDesc,
+              configHash,
+              softwareHash,
+              systemStatus,
+              systemError,
+              systemDate,
+              deviceRestart,
+              updateOperation,
+              switchOperation,
+              softwareActivationDate,
+              configActivationDate,
+              softwareActivatedDate,
+              configUpdate,
+              configUpdateStatus,
+              configUpdateError,
+              configUpdated,
+              configUpdateMode,
+              softwareUpdate,
+              softwareUpdateStatus,
+              softwareUpdateError,
+              softwareUpdated,
+              altConfigDesc,
+              altConfigHash,
+              altConfigUpdated,
+              altSoftwareVersion,
+              altSoftwareHash,
+              altSoftwareUpdated,
+              syslogUpload,
+              syslogUploadStatus,
+              configUpload,
+              configUploadStatus,
+              systemTemperature,
+              systemStatisticsReset }
+    STATUS  current
+    DESCRIPTION
+            "A group of system objects for basic adminstration."
+    ::= { nbGroups 1 }
+nbWwanGroup OBJECT-GROUP
+    OBJECTS { wwanModemName,
+              wwanModemType,
+              wwanServiceType,
+              wwanRegistrationState,
+              wwanSignalStrength,
+              wwanNetworkName,
+              wwanLocalAreaIdentification,
+              wwanLocalAreaCode,
+              wwanCellId,
+              wwanTemperature,
+              wwanIccid,
+              wwanRSRP,
+              wwanRSRQ,
+              wwanSINR,
+              wwanRSCP,
+              wwanECIO,
+              wwanSignalLevel,
+              wwanSignalQuality }
+    STATUS  current
+    DESCRIPTION
+            "A group of WWAN objects for WWAN statistics."
+    ::= { nbGroups 2 }
+    nbGnssGroup OBJECT-GROUP
+    OBJECTS { gnssName,
+              gnssSystem,
+              gnssLat,
+              gnssLon,
+              gnssAlt,
+              gnssNumSat,
+              gnssNumSatUsed,
+              gnssHorizontalSpeed,
+              gnssVerticalSpeed,
+              gnssTrackAngle }
+    STATUS  current
+    DESCRIPTION
+            "A group of GNSS objects for GNSS statistics."
+    ::= { nbGroups 3 }
+    nbWlanGroup OBJECT-GROUP
+    OBJECTS { wlanModuleName,
+              wlanModuleType,
+              wlanNumClients,
+              wlanModuleChannel,
+              wlanModuleFrequency,
+              wlanSignalStrength }
+    STATUS  current
+    DESCRIPTION
+            "A group of WLAN objects for WLAN statistics."
+    ::= { nbGroups 4 }
+    nbWlanStationGroup OBJECT-GROUP
+    OBJECTS { wlanStationInterface,
+              wlanStationMac,
+              wlanStationSignalStrength,
+              wlanStationBitrate,
+              wlanStationRxBytes,
+              wlanStationTxBytes,
+              wlanStationInactive }
+    STATUS  current
+    DESCRIPTION
+            "A group of WLAN station objects for WLAN stations statistics."
+    ::= { nbGroups 5 }
+    nbWanGroup OBJECT-GROUP
+    OBJECTS { nbHotLink,
+              wanLinkName,
+              wanLinkState,
+              wanLinkSince,
+              wanLinkType,
+              wanLinkInterface,
+              wanLinkAddress,
+              wanLinkGateway,
+              wanLinkNetmask,
+              wanDialAttempts,
+              wanDialSuccess,
+              wanDialFailures,
+              wanDataDownloaded,
+              wanDataUploaded,
+              wanDownloadRate,
+              wanUploadRate,
+              wanDataDownloadedRoaming,
+              wanDataUploadedRoaming }
+    STATUS  current
+    DESCRIPTION
+            "A group of WAN objects for WAN statistics."
+    ::= { nbGroups 6 }
+    nbDioGroup OBJECT-GROUP
+    OBJECTS { dioStatusIn1,
+              dioStatusIn2,
+              dioStatusOut1,
+              dioStatusOut2,
+              dioSetOUT1,
+              dioSetOUT2 }
+    STATUS  current
+    DESCRIPTION
+            "A group of DIO objects for DIO statistics and management."
+    ::= { nbGroups 7 }
+    nbSerialGroup OBJECT-GROUP
+    OBJECTS { serialName,
+              serialState,
+              serialRxBytes,
+              serialTxBytes,
+              serialFrameErrors,
+              serialOverrunErrors,
+              serialParityErrors,
+              serialBrkErrors,
+              serialBufferOverrunErrors }
+    STATUS  current
+    DESCRIPTION
+            "A group of serial objects for serial statistics."
+    ::= { nbGroups 8 }
+    nbEventGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { sdk-trap,
+              wan-up,
+              wan-down,
+              dio-in1-on,
+              dio-in1-off,
+              dio-in2-on,
+              dio-in2-off,
+              dio-out1-on,
+              dio-out1-off,
+              dio-out2-on,
+              dio-out2-off,
+              gps-up,
+              gps-down,
+              openvpn-up,
+              openvpn-down,
+              ipsec-up,
+              ipsec-down,
+              pptp-up,
+              pptp-down,
+              dialin-up,
+              dialin-down,
+              mobileip-up,
+              mobileip-down,
+              gre-up,
+              gre-down,
+              l2tp-up,
+              l2tp-down,
+              system-login-failed,
+              system-login-succeeded,
+              system-logout,
+              system-rebooting,
+              system-startup,
+              test,
+              sdk-startup,
+              system-time-updated,
+              system-poweroff,
+              system-error,
+              system-no-error,
+              sms-sent,
+              sms-notsent,
+              sms-received,
+              sms-report-received,
+              call-incoming,
+              call-outgoing,
+              ddns-update-succeeded,
+              ddns-update-failed,
+              usb-storage-added,
+              usb-storage-removed,
+              usb-eth-added,
+              usb-eth-removed,
+              usb-serial-added,
+              usb-serial-removed,
+              redundancy-master,
+              redundancy-backup }
+    STATUS  current
+    DESCRIPTION
+            "A group of event notification objects for event statistics."
+    ::= { nbGroups 9 }
+-- ****************************************************************************
+-- nbAdminTable
 -- ****************************************************************************
@@ Line 104: / Line 389: @@
         "The serial number of the device"
     ::= { admin 3 }
+configDesc OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The description of the current configuration"
+    ::= { admin 4 }
+configHash OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The hash of the current configuration"
+    ::= { admin 5 }
+softwareHash OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The hash of the current software"
+    ::= { admin 6 }
+systemStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                ok (1),
+                degraded (2),
+                outoforder (3)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The global system status"
+    ::= { admin 7 }
+systemError OBJECT-TYPE
+    SYNTAX  DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A comma-separated list of services which are in error state"
+    ::= { admin 8 }
+systemDate OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current local date and time of day."
+    ::= { admin 9 }
 deviceRestart OBJECT-TYPE
@@ Line 114: / Line 451: @@
         "Force a device restart"
     ::= { admin 10 }
+-- Update --
+updateOperation OBJECT-TYPE
+    SYNTAX  INTEGER {
+                update (0),
+                store (1)
+            }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The desired operation for configuration or software updates"
+    ::= { admin 11 }
+switchOperation OBJECT-TYPE
+    SYNTAX  INTEGER {
+                software (0),
+                config (1)
+            }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The operation trigger to switch to alternative software or configuration"
+    ::= { admin 12 }
+softwareActivationDate OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The date and time when the alternative software shall be activated"
+    ::= { admin 13 }
+configActivationDate OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The date and time when the alternative configuration shall be activated"
+    ::= { admin 14 }
+softwareActivatedDate OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The Date and Time when the current running software was booted the first time"
+    ::= { admin 15 }
+-- Configuration Update --
 configUpdate OBJECT-TYPE
@@ Line 120: / Line 507: @@
     STATUS  current
     DESCRIPTION
-        "Update the system configuration from the specified URL.
+        "Update the system configuration from the specified URL,
-          The URL must be preceded by one of the prefixes tftp://, ftp://, http://
+          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
           and either point to the update package or to a server directory which
           contains a file named <serial-number>.zip"
-    ::= { admin 11 }
+    ::= { admin 20 }
 configUpdateStatus OBJECT-TYPE
     SYNTAX  INTEGER {
+                stored (0),
                 succeeded (1),
                 failed (2),
@@ Line 137: / Line 525: @@
     DESCRIPTION
         "The status of the last configuration update cycle"
-    ::= { admin 12 }
+    ::= { admin 21 }
+configUpdateError OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The error code of the last configuration update"
+    ::= { admin 22 }
+configUpdated OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The date of the last configuration update"
+    ::= { admin 23 }
+configUpdateMode OBJECT-TYPE
+    SYNTAX  INTEGER {
+                full (0),
+                partial (1)
+            }
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The desired system configuration update mode (full or partial)"
+    ::= { admin 24 }
+-- Software Update --
 softwareUpdate OBJECT-TYPE
@@ Line 145: / Line 562: @@
     DESCRIPTION
         "Update the system software from the specified URL,
-          the URL must be preceded by one of the prefixes tftp://, ftp://, http://
+          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
-          and point to the to be installed image."
+          and point to the to be installed image"
-    ::= { admin 13 }
+    ::= { admin 25 }
 softwareUpdateStatus OBJECT-TYPE
     SYNTAX  INTEGER {
+                stored (0),
                 succeeded (1),
                 failed (2),
@@ Line 160: / Line 578: @@
     DESCRIPTION
         "The status of the last software update cycle"
-    ::= { admin 14 }
+    ::= { admin 26 }
+softwareUpdateError OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The error code of the last software update"
+    ::= { admin 27 }
+softwareUpdated OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The date of the last software update"
+    ::= { admin 28 }
+-- Alternative Configuration --
+altConfigDesc OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The description of the alternative configuration"
+    ::= { admin 30 }
+altConfigHash OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The hash of the alternative configuration"
+    ::= { admin 31 }
+altConfigUpdated OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The date of the last alternative configuration update"
+    ::= { admin 32 }
+-- Alternative Software --
+altSoftwareVersion OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The version of the alternative software"
+    ::= { admin 35 }
+altSoftwareHash OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The hash of the alternative software"
+    ::= { admin 36 }
+altSoftwareUpdated OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The date of the last alternative software update"
+    ::= { admin 37 }
+-- Upload Syslog --
+syslogUpload OBJECT-TYPE
+    SYNTAX  URLString
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "Upload the current system logs to the specified URL,
+          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
+          and point to the path where the system log shall be stored."
+    ::= { admin 40 }
+syslogUploadStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                succeeded (1),
+                failed (2),
+                inprogress (3),
+                notstarted (4)
+            }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The status of the last syslog upload cycle"
+    ::= { admin 41 }
+-- Upload Config --
+configUpload OBJECT-TYPE
+    SYNTAX  URLString
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "Upload the current configuration to the specified URL,
+          the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://)
+          and point to the path where the config shall be stored."
+    ::= { admin 42 }
+configUploadStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                succeeded (1),
+                failed (2),
+                inprogress (3),
+                notstarted (4)
+            }
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The status of the last config upload cycle"
+    ::= { admin 43 }
+-- Further System Paramters --
+systemTemperature OBJECT-TYPE
+    SYNTAX      FloatSyntax
+    UNITS       "Celsius"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current temperature of the System"
+    ::= { admin 50 }
+systemStatisticsReset OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Reset statistics for the given wanlink"
+    ::= { admin 60 }
 -- ****************************************************************************
--- NBWwanTable
+-- nbWwanTable
 -- ****************************************************************************
@@ Line 192: / Line 746: @@
     wwanLocalAreaIdentification DisplayString,
     wwanLocalAreaCode DisplayString,
-    wwanCellId DisplayString
+    wwanCellId DisplayString,
+    wwanTemperature DisplayString,
+    wwanIccid DisplayString,
+    wwanRSRP DisplayString,
+    wwanRSRQ DisplayString,
+    wwanSINR DisplayString,
+    wwanRSCP DisplayString,
+    wwanECIO DisplayString,
+    wwanSignalLevel Integer32,
+    wwanSignalQuality DisplayString
 }
@@ Line 275: / Line 838: @@
     ::= { nbWwanEntry 10 }
+wwanTemperature OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current temperature of the WWAN modem"
+    ::= { nbWwanEntry 11 }
+wwanIccid OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Integrated Circuit Card Identifier (ICCID) of the SIM connected to the WWAN modem"
+    ::= { nbWwanEntry 12 }
+wwanRSRP OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Reference Signal Received Power (LTE) of the WWAN modem"
+    ::= { nbWwanEntry 13 }
+wwanRSRQ  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Reference Signal Received Quality (LTE) of the WWAN modem"
+    ::= { nbWwanEntry 14 }
+wwanSINR  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Signal to interference plus noise ratio (LTE) of the WWAN modem"
+    ::= { nbWwanEntry 15 }
+wwanRSCP  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Received Signal Code Power (UMTS) of the WWAN modem"
+    ::= { nbWwanEntry 16 }
+wwanECIO  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current ratio of Received power of the carrier to the all over Noise (UMTS) of the WWAN modem"
+    ::= { nbWwanEntry 17 }
+wwanSignalLevel  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current signal level of the WWAN modem"
+    ::= { nbWwanEntry 18 }
+wwanSignalQuality  OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current signal quality of the WWAN modem"
+    ::= { nbWwanEntry 19 }
 -- ****************************************************************************
--- NBGnssTable
+-- nbGnssTable
 -- ****************************************************************************
@@ Line 304: / Line 936: @@
     gnssLon DisplayString,
     gnssAlt DisplayString,
-    gnssNumSat Integer32
+    gnssNumSat Integer32,
+    gnssNumSatUsed Integer32,
+    gnssHorizontalSpeed DisplayString,
+    gnssVerticalSpeed DisplayString,
+    gnssTrackAngle DisplayString
 }
@@ Line 360: / Line 996: @@
     STATUS      current
     DESCRIPTION
-        "The current number of available satellites for the GNSS device"
+        "The current number of satellites in view for the GNSS device"
     ::= { nbGnssEntry 7 }
+gnssNumSatUsed OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current number of used satellites for the GNSS device"
+    ::= { nbGnssEntry 8 }
+gnssHorizontalSpeed OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current horizontal speed over the ground value in meter per second received by the GNSS device"
+    ::= { nbGnssEntry 9 }
+gnssVerticalSpeed OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current vertical speed value in meter per second received by the GNSS device"
+    ::= { nbGnssEntry 10 }
+gnssTrackAngle OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current track angle value in degrees received by the GNSS device"
+    ::= { nbGnssEntry 11 }
 -- ****************************************************************************
--- NBWlanTable
+-- nbWlanTable
 -- ****************************************************************************
@@ Line 389: / Line 1057: @@
     wlanModuleName DisplayString,
     wlanModuleType DisplayString,
-    wlanNumClients Integer32
+    wlanNumClients Integer32,
+    wlanModuleChannel Integer32,
+    wlanModuleFrequency Integer32,
+    wlanSignalStrength Integer32
 }
@@ Line 422: / Line 1092: @@
     STATUS      current
     DESCRIPTION
-        "Current number of clients connected to the WLAN module (if operated as access point)"
+        "Current number of clients connected to the WLAN module in access-point mode"
     ::= { nbWlanEntry 4 }
+wlanModuleChannel OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Current channel of the WLAN module"
+    ::= { nbWlanEntry 5 }
+wlanModuleFrequency OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "MHz"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Current frequency of the WLAN module"
+    ::= { nbWlanEntry 6 }
+wlanSignalStrength OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Current signal strength of the WLAN module in client mode"
+    ::= { nbWlanEntry 7 }
+-- ****************************************************************************
+-- nbWlanStationTable
+-- ****************************************************************************
+nbWlanStationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NBWlanStationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table shows current connected clients "
+    ::= { nb 61 }
+nbWlanStationEntry OBJECT-TYPE
+    SYNTAX      NBWlanStationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry descibes one connected client"
+    INDEX       { wlanStationIndex }
+    ::= { nbWlanStationTable 1 }
+NBWlanStationEntry ::= SEQUENCE {
+    wlanStationIndex Integer32,
+    wlanStationInterface DisplayString,
+    wlanStationMac DisplayString,
+    wlanStationSignalStrength Integer32,
+    wlanStationBitrate Integer32,
+    wlanStationRxBytes Counter64,
+    wlanStationTxBytes Counter64,
+    wlanStationInactive Integer32
+}
+wlanStationIndex OBJECT-TYPE
+    SYNTAX      Integer32(0..254)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "WLAN station index"
+    ::= { nbWlanStationEntry 1 }
+wlanStationInterface OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The WLAN interface name"
+    ::= { nbWlanStationEntry 2 }
+wlanStationMac OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The MAC address of a connected station"
+    ::= { nbWlanStationEntry 3 }
+wlanStationSignalStrength OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The signal strength of a connected station"
+    ::= { nbWlanStationEntry 4 }
+wlanStationBitrate OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "Mbit/s"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The bitrate of a connected station"
+    ::= { nbWlanStationEntry 5 }
+wlanStationRxBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of received bytes of a connected station"
+    ::= { nbWlanStationEntry 6 }
+wlanStationTxBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of transmitted bytes of a connected station"
+    ::= { nbWlanStationEntry 7 }
+wlanStationInactive OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "ms"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The inactivity time of a connected station"
+    ::= { nbWlanStationEntry 8 }
+-- ****************************************************************************
+-- nbWanTable
+-- ****************************************************************************
+nbHotLink OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS  current
+    DESCRIPTION
+        "The active WAN link"
+    ::= { nb 70 }
+nbWanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NBWanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION "The table describing any WAN link and their current status"
+    ::= { nb 71 }
+nbWanEntry OBJECT-TYPE
+    SYNTAX      NBWanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION "An entry describing a WAN link and its current status"
+    INDEX       { wanLinkIndex }
+    ::= { nbWanTable 1 }
+NBWanEntry ::= SEQUENCE {
+    wanLinkIndex Integer32,
+    wanLinkName DisplayString,
+    wanLinkState DisplayString,
+    wanLinkSince DisplayString,
+    wanLinkType DisplayString,
+    wanLinkInterface DisplayString,
+    wanLinkAddress DisplayString,
+    wanLinkGateway DisplayString,
+    wanLinkNetmask DisplayString,
+    wanDialAttempts Integer32,
+    wanDialSuccess Integer32,
+    wanDialFailures Integer32,
+    wanDataDownloaded Counter64,
+    wanDataUploaded Counter64,
+    wanDownloadRate Integer32,
+    wanUploadRate Integer32,
+    wanDataDownloadedRoaming Counter64,
+    wanDataUploadedRoaming Counter64
+}
+wanLinkIndex OBJECT-TYPE
+    SYNTAX      Integer32(0..254)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+	  "WAN link index"
+    ::= { nbWanEntry 1 }
+wanLinkName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link name"
+    ::= { nbWanEntry 2 }
+wanLinkState OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link state"
+    ::= { nbWanEntry 3 }
+wanLinkSince OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link since up"
+    ::= { nbWanEntry 4 }
+wanLinkType OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link type"
+    ::= { nbWanEntry 5 }
+wanLinkInterface OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link interface"
+    ::= { nbWanEntry 6 }
+wanLinkAddress OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link address"
+    ::= { nbWanEntry 7 }
+wanLinkGateway OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link gateway"
+    ::= { nbWanEntry 8 }
+wanLinkNetmask OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link netmask"
+    ::= { nbWanEntry 9 }
+wanDialAttempts OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link dial attempts"
+    ::= { nbWanEntry 10 }
+wanDialSuccess OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link dial success"
+    ::= { nbWanEntry 11 }
+wanDialFailures OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link dial failures"
+    ::= { nbWanEntry 12 }
+wanDataDownloaded OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link data downloaded"
+    ::= { nbWanEntry 13 }
+wanDataUploaded OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link data uploaded"
+    ::= { nbWanEntry 14 }
+wanDownloadRate OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link download rate"
+    ::= { nbWanEntry 15 }
+wanUploadRate OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link upload rate"
+    ::= { nbWanEntry 16 }
+wanDataDownloadedRoaming OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link data downloaded during roaming"
+    ::= { nbWanEntry 17 }
+wanDataUploadedRoaming OBJECT-TYPE
+    SYNTAX      Counter64
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "WAN link data uploaded during roaming"
+    ::= { nbWanEntry 18 }
 -- ****************************************************************************
--- NBDioTable
+-- nbDioTable
 -- ****************************************************************************
@@ Line 496: / Line 1494: @@
     ::= { dio 11 }
+-- ****************************************************************************
+-- nbSerialTable
+-- ****************************************************************************
+nbSerialTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NBSerialEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table describing any serial ports and their current statistics"
+    ::= { nb 54 }
+nbSerialEntry OBJECT-TYPE
+    SYNTAX      NBSerialEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a serial port and its current statistics"
+    INDEX       { serialIndex }
+    ::= { nbSerialTable 1 }
+NBSerialEntry ::= SEQUENCE {
+    serialIndex Integer32,
+    serialName DisplayString,
+    serialState Integer32,
+    serialRxBytes Integer32,
+    serialTxBytes Integer32,
+    serialFrameErrors Integer32,
+    serialOverrunErrors Integer32,
+    serialParityErrors Integer32,
+    serialBrkErrors Integer32,
+    serialBufferOverrunErrors Integer32
+}
+serialIndex OBJECT-TYPE
+    SYNTAX      Integer32(0..254)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Serial port index"
+    ::= { nbSerialEntry 1 }
+serialName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Serial port name"
+    ::= { nbSerialEntry 2 }
+serialState OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current state of the serial port"
+    ::= { nbSerialEntry 3 }
+serialRxBytes OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes received on the serial port"
+    ::= { nbSerialEntry 4 }
+serialTxBytes OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes transmitted on the serial port"
+    ::= { nbSerialEntry 5 }
+serialFrameErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frame errors on the serial port"
+    ::= { nbSerialEntry 6 }
+serialOverrunErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of overrun errors on the serial port"
+    ::= { nbSerialEntry 7 }
+serialParityErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of parity errors on the serial port"
+    ::= { nbSerialEntry 8 }
+serialBrkErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of BRK errors on the serial port"
+    ::= { nbSerialEntry 9 }
+serialBufferOverrunErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of buffer overrun errors on the serial port"
+    ::= { nbSerialEntry 10 }
+-- ****************************************************************************
+-- nbTrapHistoryTable
+-- ****************************************************************************
+--  ::= { nb 80 } this OID is obsolete
 -- ****************************************************************************
@@ Line 502: / Line 1621: @@
 events          OBJECT IDENTIFIER ::= { traps 0 }
+sdk-trap NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "SDK trap"
+    ::= { events 1 }
 wan-up NOTIFICATION-TYPE
@@ Line 622: / Line 1746: @@
     DESCRIPTION "GRE connection went down"
     ::= { events 413 }
+l2tp-up NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "L2TP connection came up"
+    ::= { events 414 }
+l2tp-down NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "L2TP connection went down"
+    ::= { events 415 }
 system-login-failed NOTIFICATION-TYPE
@@ Line 662: / Line 1796: @@
     DESCRIPTION "System time has been updated"
     ::= { events 508 }
+system-poweroff NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "System poweroff has been triggered"
+    ::= { events 509 }
+system-error NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "System is in error state"
+    ::= { events 510 }
+system-no-error NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "System left error state"
+    ::= { events 511 }
 sms-sent NOTIFICATION-TYPE
@@ Line 732: / Line 1881: @@
     DESCRIPTION "USB serial device has been removed"
     ::= { events 906 }
+redundancy-master NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "System is now master router"
+    ::= { events 1001 }
+redundancy-backup NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "System is now backup router"
+    ::= { events 1002 }
 END
 </code>

User Tools

Site Tools

Differences

Page Tools