Differences

This shows you the differences between two versions of the page.

--- configuration:mib [2017/09/15 14:20] – fachet
+++ configuration:mib [2022/03/16 13:31] (current) – fachet
@@ Line 1: / Line 1: @@
 ====== Management Information Base (MIB) ======
-<code c mib.txt>
+<code c VENDOR-MIB.txt>
 -- ****************************************************************************
 -- NetModule AG VENDOR MIB
 --
 --
--- (c) COPYRIGHT 2017 by NetModule AG, Switzerland
+-- (c) COPYRIGHT 2022 by NetModule AG, Switzerland
 -- All rights reserved.
 --
@@ Line 20: / Line 19: @@
 IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
-       Integer32, Counter32, Gauge32,
+       Integer32, Counter64, enterprises        FROM SNMPv2-SMI
-       Counter64, TimeTicks                     FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString,
-       PhysAddress, TruthValue, RowStatus, DateAndTime,
+       DateAndTime                              FROM SNMPv2-TC
-       TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC
+       MODULE-COMPLIANCE, OBJECT-GROUP,
-       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
+       NOTIFICATION-GROUP                       FROM SNMPv2-CONF
-       snmpTraps                                FROM SNMPv2-MIB
+       URLString                                FROM NETWORK-SERVICES-MIB;
-       URLString                                FROM NETWORK-SERVICES-MIB
-       enterprises                              FROM SNMPv2-SMI;
 -- ****************************************************************************
@@ Line 35: / Line 31: @@
 nb MODULE-IDENTITY
-        LAST-UPDATED "201701131200Z"
+        LAST-UPDATED "202103031200Z"
         ORGANIZATION "NetModule AG"
         CONTACT-INFO
@@ Line 42: / Line 38: @@
             "MIB module which defines the NB router specific entities"
-        REVISION "201701131200Z"
+        REVISION "202103031200Z"
         DESCRIPTION
-             "MIB for software release 4.0"
+             "MIB for software release 4.5"
+        REVISION "202001130900Z"
+        DESCRIPTION
+             "MIB for software release 4.4"
+        REVISION "201910151045Z"
+        DESCRIPTION
+             "MIB for software release 4.4"
+        REVISION "201908051530Z"
+        DESCRIPTION
+             "MIB for software release 4.3"
+        REVISION "201908041530Z"
+        DESCRIPTION
+             "MIB for software release 4.2"
+        REVISION "201806261330Z"
+        DESCRIPTION
+             "MIB for software release 4.1"
         REVISION "201610181200Z"
@@ Line 78: / Line 94: @@
 netmodule OBJECT IDENTIFIER ::= { enterprises 31496 }
+-- ****************************************************************************
+-- compliances and conformance
+-- ****************************************************************************
+nbConformance OBJECT IDENTIFIER ::= { nb 2 }
+nbCompliances OBJECT IDENTIFIER ::= { nbConformance 1 }
+nbGroups      OBJECT IDENTIFIER ::= { nbConformance 2 }
+nbCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for the nb MIB."
+      MODULE  -- this module
+          MANDATORY-GROUPS { nbAdminGroup,
+                             nbWwanGroup,
+                             nbGnssGroup,
+                             nbWlanGroup,
+                             nbWlanStationGroup,
+                             nbWanGroup,
+                             nbDioGroup,
+                             nbSerialGroup,
+                             nbEventGroup }
+    ::= { nbCompliances 1 }
 -- ****************************************************************************
@@ Line 83: / Line 123: @@
 -- ****************************************************************************
-system        OBJECT IDENTIFIER ::= { nb   1 }
+-- ::= { nb   1 } this OID is obsolete
-products      OBJECT IDENTIFIER ::= { nb  10 }
+-- ::= { nb  10 } this OID is obsolete
 admin         OBJECT IDENTIFIER ::= { nb  40 }
 dio           OBJECT IDENTIFIER ::= { nb  53 }
@@ Line 90: / Line 130: @@
 traps         OBJECT IDENTIFIER ::= { nb 100 }
+-- ****************************************************************************
+-- Textual-Conventions
 -- ****************************************************************************
-nb1600        OBJECT IDENTIFIER ::= { products 46 }
+FloatSyntax ::= TEXTUAL-CONVENTION
-nb2700        OBJECT IDENTIFIER ::= { products 47 }
+    DISPLAY-HINT "d-1"
-nb3700        OBJECT IDENTIFIER ::= { products 48 }
+    STATUS       current
-nb2710        OBJECT IDENTIFIER ::= { products 51 }
+    DESCRIPTION  "Fixed point, one decimal"
-nb3710        OBJECT IDENTIFIER ::= { products 52 }
+    SYNTAX       Integer32
-nb3720        OBJECT IDENTIFIER ::= { products 53 }
-nb2800        OBJECT IDENTIFIER ::= { products 54 }
+-- ****************************************************************************
-nb3701        OBJECT IDENTIFIER ::= { products 55 }
+-- nb groups
-nb3711        OBJECT IDENTIFIER ::= { products 56 }
+-- ****************************************************************************
-nb3800        OBJECT IDENTIFIER ::= { products 57 }
+nbAdminGroup OBJECT-GROUP
+    OBJECTS { swVersion,
+              kernelVersion,
+              serialNumber,
+              configDesc,
+              configHash,
+              softwareHash,
+              systemStatus,
+              systemError,
+              systemDate,
+              deviceRestart,
+              updateOperation,
+              switchOperation,
+              softwareActivationDate,
+              configActivationDate,
+              softwareActivatedDate,
+              configUpdate,
+              configUpdateStatus,
+              configUpdateError,
+              configUpdated,
+              configUpdateMode,
+              softwareUpdate,
+              softwareUpdateStatus,
+              softwareUpdateError,
+              softwareUpdated,
+              altConfigDesc,
+              altConfigHash,
+              altConfigUpdated,
+              altSoftwareVersion,
+              altSoftwareHash,
+              altSoftwareUpdated,
+              syslogUpload,
+              syslogUploadStatus,
+              configUpload,
+              configUploadStatus,
+              systemTemperature,
+              systemStatisticsReset }
+    STATUS  current
+    DESCRIPTION
+            "A group of system objects for basic adminstration."
+    ::= { nbGroups 1 }
+nbWwanGroup OBJECT-GROUP
+    OBJECTS { wwanModemName,
+              wwanModemType,
+              wwanServiceType,
+              wwanRegistrationState,
+              wwanSignalStrength,
+              wwanNetworkName,
+              wwanLocalAreaIdentification,
+              wwanLocalAreaCode,
+              wwanCellId,
+              wwanTemperature,
+              wwanIccid,
+              wwanRSRP,
+              wwanRSRQ,
+              wwanSINR,
+              wwanRSCP,
+              wwanECIO,
+              wwanSignalLevel,
+              wwanSignalQuality }
+    STATUS  current
+    DESCRIPTION
+            "A group of WWAN objects for WWAN statistics."
+    ::= { nbGroups 2 }
+    nbGnssGroup OBJECT-GROUP
+    OBJECTS { gnssName,
+              gnssSystem,
+              gnssLat,
+              gnssLon,
+              gnssAlt,
+              gnssNumSat,
+              gnssNumSatUsed,
+              gnssHorizontalSpeed,
+              gnssVerticalSpeed,
+              gnssTrackAngle }
+    STATUS  current
+    DESCRIPTION
+            "A group of GNSS objects for GNSS statistics."
+    ::= { nbGroups 3 }
+    nbWlanGroup OBJECT-GROUP
+    OBJECTS { wlanModuleName,
+              wlanModuleType,
+              wlanNumClients,
+              wlanModuleChannel,
+              wlanModuleFrequency,
+              wlanSignalStrength }
+    STATUS  current
+    DESCRIPTION
+            "A group of WLAN objects for WLAN statistics."
+    ::= { nbGroups 4 }
+    nbWlanStationGroup OBJECT-GROUP
+    OBJECTS { wlanStationInterface,
+              wlanStationMac,
+              wlanStationSignalStrength,
+              wlanStationBitrate,
+              wlanStationRxBytes,
+              wlanStationTxBytes,
+              wlanStationInactive }
+    STATUS  current
+    DESCRIPTION
+            "A group of WLAN station objects for WLAN stations statistics."
+    ::= { nbGroups 5 }
+    nbWanGroup OBJECT-GROUP
+    OBJECTS { nbHotLink,
+              wanLinkName,
+              wanLinkState,
+              wanLinkSince,
+              wanLinkType,
+              wanLinkInterface,
+              wanLinkAddress,
+              wanLinkGateway,
+              wanLinkNetmask,
+              wanDialAttempts,
+              wanDialSuccess,
+              wanDialFailures,
+              wanDataDownloaded,
+              wanDataUploaded,
+              wanDownloadRate,
+              wanUploadRate,
+              wanDataDownloadedRoaming,
+              wanDataUploadedRoaming }
+    STATUS  current
+    DESCRIPTION
+            "A group of WAN objects for WAN statistics."
+    ::= { nbGroups 6 }
+    nbDioGroup OBJECT-GROUP
+    OBJECTS { dioStatusIn1,
+              dioStatusIn2,
+              dioStatusOut1,
+              dioStatusOut2,
+              dioSetOUT1,
+              dioSetOUT2 }
+    STATUS  current
+    DESCRIPTION
+            "A group of DIO objects for DIO statistics and management."
+    ::= { nbGroups 7 }
+    nbSerialGroup OBJECT-GROUP
+    OBJECTS { serialName,
+              serialState,
+              serialRxBytes,
+              serialTxBytes,
+              serialFrameErrors,
+              serialOverrunErrors,
+              serialParityErrors,
+              serialBrkErrors,
+              serialBufferOverrunErrors }
+    STATUS  current
+    DESCRIPTION
+            "A group of serial objects for serial statistics."
+    ::= { nbGroups 8 }
+    nbEventGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { sdk-trap,
+              wan-up,
+              wan-down,
+              dio-in1-on,
+              dio-in1-off,
+              dio-in2-on,
+              dio-in2-off,
+              dio-out1-on,
+              dio-out1-off,
+              dio-out2-on,
+              dio-out2-off,
+              gps-up,
+              gps-down,
+              openvpn-up,
+              openvpn-down,
+              ipsec-up,
+              ipsec-down,
+              pptp-up,
+              pptp-down,
+              dialin-up,
+              dialin-down,
+              mobileip-up,
+              mobileip-down,
+              gre-up,
+              gre-down,
+              l2tp-up,
+              l2tp-down,
+              system-login-failed,
+              system-login-succeeded,
+              system-logout,
+              system-rebooting,
+              system-startup,
+              test,
+              sdk-startup,
+              system-time-updated,
+              system-poweroff,
+              system-error,
+              system-no-error,
+              sms-sent,
+              sms-notsent,
+              sms-received,
+              sms-report-received,
+              call-incoming,
+              call-outgoing,
+              ddns-update-succeeded,
+              ddns-update-failed,
+              usb-storage-added,
+              usb-storage-removed,
+              usb-eth-added,
+              usb-eth-removed,
+              usb-serial-added,
+              usb-serial-removed,
+              redundancy-master,
+              redundancy-backup }
+    STATUS  current
+    DESCRIPTION
+            "A group of event notification objects for event statistics."
+    ::= { nbGroups 9 }
 -- ****************************************************************************
--- NBAdminTable
+-- nbAdminTable
 -- ****************************************************************************
@@ Line 232: / Line 491: @@
         "The date and time when the alternative configuration shall be activated"
     ::= { admin 14 }
+softwareActivatedDate OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-write
+    STATUS  current
+    DESCRIPTION
+        "The Date and Time when the current running software was booted the first time"
+    ::= { admin 15 }
 -- Configuration Update --
@@ Line 430: / Line 697: @@
         "The status of the last config upload cycle"
     ::= { admin 43 }
+-- Further System Paramters --
+systemTemperature OBJECT-TYPE
+    SYNTAX      FloatSyntax
+    UNITS       "Celsius"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current temperature of the System"
+    ::= { admin 50 }
+systemStatisticsReset OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Reset statistics for the given wanlink"
+    ::= { admin 60 }
 -- ****************************************************************************
--- NBWwanTable
+-- nbWwanTable
 -- ****************************************************************************
@@ Line 462: / Line 748: @@
     wwanCellId DisplayString,
     wwanTemperature DisplayString,
-    wwanIccid DisplayString
+    wwanIccid DisplayString,
+    wwanRSRP DisplayString,
+    wwanRSRQ DisplayString,
+    wwanSINR DisplayString,
+    wwanRSCP DisplayString,
+    wwanECIO DisplayString,
+    wwanSignalLevel Integer32,
+    wwanSignalQuality DisplayString
 }
@@ Line 560: / Line 853: @@
         "The Integrated Circuit Card Identifier (ICCID) of the SIM connected to the WWAN modem"
     ::= { nbWwanEntry 12 }
+wwanRSRP OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Reference Signal Received Power (LTE) of the WWAN modem"
+    ::= { nbWwanEntry 13 }
+wwanRSRQ  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Reference Signal Received Quality (LTE) of the WWAN modem"
+    ::= { nbWwanEntry 14 }
+wwanSINR  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Signal to interference plus noise ratio (LTE) of the WWAN modem"
+    ::= { nbWwanEntry 15 }
+wwanRSCP  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dBm"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current Received Signal Code Power (UMTS) of the WWAN modem"
+    ::= { nbWwanEntry 16 }
+wwanECIO  OBJECT-TYPE
+    SYNTAX      DisplayString
+    UNITS       "dB"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current ratio of Received power of the carrier to the all over Noise (UMTS) of the WWAN modem"
+    ::= { nbWwanEntry 17 }
+wwanSignalLevel  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current signal level of the WWAN modem"
+    ::= { nbWwanEntry 18 }
+wwanSignalQuality  OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION "The current signal quality of the WWAN modem"
+    ::= { nbWwanEntry 19 }
 -- ****************************************************************************
--- NBGnssTable
+-- nbGnssTable
 -- ****************************************************************************
@@ Line 686: / Line 1033: @@
 -- ****************************************************************************
--- NBWlanTable
+-- nbWlanTable
 -- ****************************************************************************
@@ Line 775: / Line 1122: @@
 -- ****************************************************************************
--- NBWlanStationTable
+-- nbWlanStationTable
 -- ****************************************************************************
@@ Line 877: / Line 1224: @@
 -- ****************************************************************************
--- NBWanTable
+-- nbWanTable
 -- ****************************************************************************
@@ Line 916: / Line 1263: @@
     wanDialSuccess Integer32,
     wanDialFailures Integer32,
-    wanDataDownloaded Integer32,
+    wanDataDownloaded Counter64,
-    wanDataUploaded Integer32,
+    wanDataUploaded Counter64,
     wanDownloadRate Integer32,
     wanUploadRate Integer32,
-    wanDataDownloadedRoaming Integer32,
+    wanDataDownloadedRoaming Counter64,
-    wanDataUploadedRoaming Integer32
+    wanDataUploadedRoaming Counter64
 }
@@ Line 1023: / Line 1370: @@
 wanDataDownloaded OBJECT-TYPE
-    SYNTAX      Integer32
+    SYNTAX      Counter64
+    UNITS       "bytes"
     MAX-ACCESS  read-only
     STATUS      current
@@ Line 1032: / Line 1380: @@
 wanDataUploaded OBJECT-TYPE
-    SYNTAX      Integer32
+    SYNTAX      Counter64
+    UNITS       "bytes"
     MAX-ACCESS  read-only
     STATUS      current
@@ Line 1058: / Line 1407: @@
 wanDataDownloadedRoaming OBJECT-TYPE
-    SYNTAX      Integer32
+    SYNTAX      Counter64
+    UNITS       "bytes"
     MAX-ACCESS  read-only
     STATUS      current
@@ Line 1066: / Line 1416: @@
 wanDataUploadedRoaming OBJECT-TYPE
-    SYNTAX      Integer32
+    SYNTAX      Counter64
+    UNITS       "bytes"
     MAX-ACCESS  read-only
     STATUS      current
@@ Line 1074: / Line 1425: @@
 -- ****************************************************************************
--- NBDioTable
+-- nbDioTable
 -- ****************************************************************************
@@ Line 1143: / Line 1494: @@
     ::= { dio 11 }
+-- ****************************************************************************
+-- nbSerialTable
+-- ****************************************************************************
+nbSerialTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF NBSerialEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The table describing any serial ports and their current statistics"
+    ::= { nb 54 }
+nbSerialEntry OBJECT-TYPE
+    SYNTAX      NBSerialEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry describing a serial port and its current statistics"
+    INDEX       { serialIndex }
+    ::= { nbSerialTable 1 }
+NBSerialEntry ::= SEQUENCE {
+    serialIndex Integer32,
+    serialName DisplayString,
+    serialState Integer32,
+    serialRxBytes Integer32,
+    serialTxBytes Integer32,
+    serialFrameErrors Integer32,
+    serialOverrunErrors Integer32,
+    serialParityErrors Integer32,
+    serialBrkErrors Integer32,
+    serialBufferOverrunErrors Integer32
+}
+serialIndex OBJECT-TYPE
+    SYNTAX      Integer32(0..254)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Serial port index"
+    ::= { nbSerialEntry 1 }
+serialName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Serial port name"
+    ::= { nbSerialEntry 2 }
+serialState OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current state of the serial port"
+    ::= { nbSerialEntry 3 }
+serialRxBytes OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes received on the serial port"
+    ::= { nbSerialEntry 4 }
+serialTxBytes OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of bytes transmitted on the serial port"
+    ::= { nbSerialEntry 5 }
+serialFrameErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of frame errors on the serial port"
+    ::= { nbSerialEntry 6 }
+serialOverrunErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of overrun errors on the serial port"
+    ::= { nbSerialEntry 7 }
+serialParityErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of parity errors on the serial port"
+    ::= { nbSerialEntry 8 }
+serialBrkErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of BRK errors on the serial port"
+    ::= { nbSerialEntry 9 }
+serialBufferOverrunErrors OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The number of buffer overrun errors on the serial port"
+    ::= { nbSerialEntry 10 }
+-- ****************************************************************************
+-- nbTrapHistoryTable
+-- ****************************************************************************
+--  ::= { nb 80 } this OID is obsolete
 -- ****************************************************************************
@@ Line 1274: / Line 1746: @@
     DESCRIPTION "GRE connection went down"
     ::= { events 413 }
+l2tp-up NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "L2TP connection came up"
+    ::= { events 414 }
+l2tp-down NOTIFICATION-TYPE
+    STATUS current
+    DESCRIPTION "L2TP connection went down"
+    ::= { events 415 }
 system-login-failed NOTIFICATION-TYPE
@@ Line 1411: / Line 1893: @@
 END
 </code>

User Tools

Site Tools

Differences

Page Tools