This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Last revision Both sides next revision | ||
configuration:mib [2015/05/19 12:32] hess |
configuration:mib [2017/09/15 14:20] fachet |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Management Information Base (MIB) ====== | ====== Management Information Base (MIB) ====== | ||
<code c mib.txt> | <code c mib.txt> | ||
+ | |||
-- **************************************************************************** | -- **************************************************************************** | ||
-- NetModule AG VENDOR MIB | -- NetModule AG VENDOR MIB | ||
-- | -- | ||
-- | -- | ||
- | -- (c) COPYRIGHT 2014 by NetModule AG, Switzerland | + | -- (c) COPYRIGHT 2017 by NetModule AG, Switzerland |
-- All rights reserved. | -- All rights reserved. | ||
-- | -- | ||
Line 22: | Line 23: | ||
Counter64, TimeTicks FROM SNMPv2-SMI | Counter64, TimeTicks FROM SNMPv2-SMI | ||
TEXTUAL-CONVENTION, DisplayString, | TEXTUAL-CONVENTION, DisplayString, | ||
- | PhysAddress, TruthValue, RowStatus, | + | PhysAddress, TruthValue, RowStatus, DateAndTime, |
TimeStamp, AutonomousType, TestAndIncr FROM SNMPv2-TC | TimeStamp, AutonomousType, TestAndIncr FROM SNMPv2-TC | ||
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF | MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF | ||
Line 34: | Line 35: | ||
nb MODULE-IDENTITY | nb MODULE-IDENTITY | ||
- | LAST-UPDATED "201405091000Z" | + | LAST-UPDATED "201701131200Z" |
ORGANIZATION "NetModule AG" | ORGANIZATION "NetModule AG" | ||
CONTACT-INFO | CONTACT-INFO | ||
Line 40: | Line 41: | ||
DESCRIPTION | DESCRIPTION | ||
"MIB module which defines the NB router specific entities" | "MIB module which defines the NB router specific entities" | ||
+ | |||
+ | REVISION "201701131200Z" | ||
+ | DESCRIPTION | ||
+ | "MIB for software release 4.0" | ||
+ | |||
+ | REVISION "201610181200Z" | ||
+ | DESCRIPTION | ||
+ | "MIB for software release 4.0" | ||
+ | |||
+ | REVISION "201607121200Z" | ||
+ | DESCRIPTION | ||
+ | "MIB for software release 4.0" | ||
+ | |||
+ | REVISION "201603021200Z" | ||
+ | DESCRIPTION | ||
+ | "MIB for software release 3.9" | ||
+ | |||
+ | REVISION "201411241000Z" | ||
+ | DESCRIPTION | ||
+ | "MIB for software release 3.8" | ||
REVISION "201405091000Z" | REVISION "201405091000Z" | ||
Line 47: | Line 68: | ||
REVISION "201212191000Z" | REVISION "201212191000Z" | ||
DESCRIPTION | DESCRIPTION | ||
- | "MIB for software release 3.6" | + | "MIB for software release 3.6" |
::= { netmodule 10 } | ::= { netmodule 10 } | ||
Line 66: | Line 87: | ||
admin OBJECT IDENTIFIER ::= { nb 40 } | admin OBJECT IDENTIFIER ::= { nb 40 } | ||
dio OBJECT IDENTIFIER ::= { nb 53 } | dio OBJECT IDENTIFIER ::= { nb 53 } | ||
+ | sdk OBJECT IDENTIFIER ::= { nb 90 } | ||
traps OBJECT IDENTIFIER ::= { nb 100 } | traps OBJECT IDENTIFIER ::= { nb 100 } | ||
Line 76: | Line 98: | ||
nb3710 OBJECT IDENTIFIER ::= { products 52 } | nb3710 OBJECT IDENTIFIER ::= { products 52 } | ||
nb3720 OBJECT IDENTIFIER ::= { products 53 } | nb3720 OBJECT IDENTIFIER ::= { products 53 } | ||
+ | nb2800 OBJECT IDENTIFIER ::= { products 54 } | ||
+ | nb3701 OBJECT IDENTIFIER ::= { products 55 } | ||
+ | nb3711 OBJECT IDENTIFIER ::= { products 56 } | ||
+ | nb3800 OBJECT IDENTIFIER ::= { products 57 } | ||
-- **************************************************************************** | -- **************************************************************************** | ||
Line 104: | Line 130: | ||
"The serial number of the device" | "The serial number of the device" | ||
::= { admin 3 } | ::= { admin 3 } | ||
+ | |||
+ | configDesc OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The description of the current configuration" | ||
+ | ::= { admin 4 } | ||
+ | |||
+ | configHash OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The hash of the current configuration" | ||
+ | ::= { admin 5 } | ||
+ | |||
+ | softwareHash OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The hash of the current software" | ||
+ | ::= { admin 6 } | ||
+ | |||
+ | systemStatus OBJECT-TYPE | ||
+ | SYNTAX INTEGER { | ||
+ | ok (1), | ||
+ | degraded (2), | ||
+ | outoforder (3) | ||
+ | } | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The global system status" | ||
+ | ::= { admin 7 } | ||
+ | |||
+ | systemError OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "A comma-separated list of services which are in error state" | ||
+ | ::= { admin 8 } | ||
+ | |||
+ | systemDate OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The current local date and time of day." | ||
+ | ::= { admin 9 } | ||
deviceRestart OBJECT-TYPE | deviceRestart OBJECT-TYPE | ||
Line 114: | Line 192: | ||
"Force a device restart" | "Force a device restart" | ||
::= { admin 10 } | ::= { admin 10 } | ||
+ | |||
+ | -- Update -- | ||
+ | |||
+ | updateOperation OBJECT-TYPE | ||
+ | SYNTAX INTEGER { | ||
+ | update (0), | ||
+ | store (1) | ||
+ | } | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The desired operation for configuration or software updates" | ||
+ | ::= { admin 11 } | ||
+ | |||
+ | switchOperation OBJECT-TYPE | ||
+ | SYNTAX INTEGER { | ||
+ | software (0), | ||
+ | config (1) | ||
+ | } | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The operation trigger to switch to alternative software or configuration" | ||
+ | ::= { admin 12 } | ||
+ | |||
+ | softwareActivationDate OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The date and time when the alternative software shall be activated" | ||
+ | ::= { admin 13 } | ||
+ | |||
+ | configActivationDate OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The date and time when the alternative configuration shall be activated" | ||
+ | ::= { admin 14 } | ||
+ | |||
+ | -- Configuration Update -- | ||
configUpdate OBJECT-TYPE | configUpdate OBJECT-TYPE | ||
Line 120: | Line 240: | ||
STATUS current | STATUS current | ||
DESCRIPTION | DESCRIPTION | ||
- | "Update the system configuration from the specified URL. | + | "Update the system configuration from the specified URL, |
- | The URL must be preceded by one of the prefixes tftp://, ftp://, http:// | + | the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://) |
and either point to the update package or to a server directory which | and either point to the update package or to a server directory which | ||
contains a file named <serial-number>.zip" | contains a file named <serial-number>.zip" | ||
- | ::= { admin 11 } | + | ::= { admin 20 } |
configUpdateStatus OBJECT-TYPE | configUpdateStatus OBJECT-TYPE | ||
SYNTAX INTEGER { | SYNTAX INTEGER { | ||
+ | stored (0), | ||
succeeded (1), | succeeded (1), | ||
failed (2), | failed (2), | ||
Line 137: | Line 258: | ||
DESCRIPTION | DESCRIPTION | ||
"The status of the last configuration update cycle" | "The status of the last configuration update cycle" | ||
- | ::= { admin 12 } | + | ::= { admin 21 } |
+ | |||
+ | configUpdateError OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The error code of the last configuration update" | ||
+ | ::= { admin 22 } | ||
+ | |||
+ | configUpdated OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The date of the last configuration update" | ||
+ | ::= { admin 23 } | ||
+ | |||
+ | configUpdateMode OBJECT-TYPE | ||
+ | SYNTAX INTEGER { | ||
+ | full (0), | ||
+ | partial (1) | ||
+ | } | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The desired system configuration update mode (full or partial)" | ||
+ | ::= { admin 24 } | ||
+ | |||
+ | -- Software Update -- | ||
softwareUpdate OBJECT-TYPE | softwareUpdate OBJECT-TYPE | ||
Line 145: | Line 295: | ||
DESCRIPTION | DESCRIPTION | ||
"Update the system software from the specified URL, | "Update the system software from the specified URL, | ||
- | the URL must be preceded by one of the prefixes tftp://, ftp://, http:// | + | the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://) |
- | and point to the to be installed image." | + | and point to the to be installed image" |
- | ::= { admin 13 } | + | ::= { admin 25 } |
softwareUpdateStatus OBJECT-TYPE | softwareUpdateStatus OBJECT-TYPE | ||
SYNTAX INTEGER { | SYNTAX INTEGER { | ||
+ | stored (0), | ||
succeeded (1), | succeeded (1), | ||
failed (2), | failed (2), | ||
Line 160: | Line 311: | ||
DESCRIPTION | DESCRIPTION | ||
"The status of the last software update cycle" | "The status of the last software update cycle" | ||
- | ::= { admin 14 } | + | ::= { admin 26 } |
+ | softwareUpdateError OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The error code of the last software update" | ||
+ | ::= { admin 27 } | ||
+ | |||
+ | softwareUpdated OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The date of the last software update" | ||
+ | ::= { admin 28 } | ||
+ | |||
+ | -- Alternative Configuration -- | ||
+ | |||
+ | altConfigDesc OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The description of the alternative configuration" | ||
+ | ::= { admin 30 } | ||
+ | |||
+ | altConfigHash OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The hash of the alternative configuration" | ||
+ | ::= { admin 31 } | ||
+ | |||
+ | altConfigUpdated OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The date of the last alternative configuration update" | ||
+ | ::= { admin 32 } | ||
+ | |||
+ | -- Alternative Software -- | ||
+ | |||
+ | altSoftwareVersion OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The version of the alternative software" | ||
+ | ::= { admin 35 } | ||
+ | |||
+ | altSoftwareHash OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The hash of the alternative software" | ||
+ | ::= { admin 36 } | ||
+ | |||
+ | altSoftwareUpdated OBJECT-TYPE | ||
+ | SYNTAX DateAndTime | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The date of the last alternative software update" | ||
+ | ::= { admin 37 } | ||
+ | |||
+ | -- Upload Syslog -- | ||
+ | |||
+ | syslogUpload OBJECT-TYPE | ||
+ | SYNTAX URLString | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "Upload the current system logs to the specified URL, | ||
+ | the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://) | ||
+ | and point to the path where the system log shall be stored." | ||
+ | ::= { admin 40 } | ||
+ | |||
+ | syslogUploadStatus OBJECT-TYPE | ||
+ | SYNTAX INTEGER { | ||
+ | succeeded (1), | ||
+ | failed (2), | ||
+ | inprogress (3), | ||
+ | notstarted (4) | ||
+ | } | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The status of the last syslog upload cycle" | ||
+ | ::= { admin 41 } | ||
+ | |||
+ | -- Upload Config -- | ||
+ | |||
+ | configUpload OBJECT-TYPE | ||
+ | SYNTAX URLString | ||
+ | MAX-ACCESS read-write | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "Upload the current configuration to the specified URL, | ||
+ | the URL must be preceded by a valid prefix (e.g. tftp://, sftp://, ftp://, https:// or http://) | ||
+ | and point to the path where the config shall be stored." | ||
+ | ::= { admin 42 } | ||
+ | |||
+ | configUploadStatus OBJECT-TYPE | ||
+ | SYNTAX INTEGER { | ||
+ | succeeded (1), | ||
+ | failed (2), | ||
+ | inprogress (3), | ||
+ | notstarted (4) | ||
+ | } | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The status of the last config upload cycle" | ||
+ | ::= { admin 43 } | ||
-- **************************************************************************** | -- **************************************************************************** | ||
Line 192: | Line 460: | ||
wwanLocalAreaIdentification DisplayString, | wwanLocalAreaIdentification DisplayString, | ||
wwanLocalAreaCode DisplayString, | wwanLocalAreaCode DisplayString, | ||
- | wwanCellId DisplayString | + | wwanCellId DisplayString, |
+ | wwanTemperature DisplayString, | ||
+ | wwanIccid DisplayString | ||
} | } | ||
Line 275: | Line 545: | ||
::= { nbWwanEntry 10 } | ::= { nbWwanEntry 10 } | ||
| | ||
+ | wwanTemperature OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The current temperature of the WWAN modem" | ||
+ | ::= { nbWwanEntry 11 } | ||
+ | |||
+ | wwanIccid OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The Integrated Circuit Card Identifier (ICCID) of the SIM connected to the WWAN modem" | ||
+ | ::= { nbWwanEntry 12 } | ||
-- **************************************************************************** | -- **************************************************************************** | ||
Line 304: | Line 589: | ||
gnssLon DisplayString, | gnssLon DisplayString, | ||
gnssAlt DisplayString, | gnssAlt DisplayString, | ||
- | gnssNumSat Integer32 | + | gnssNumSat Integer32, |
+ | gnssNumSatUsed Integer32, | ||
+ | gnssHorizontalSpeed DisplayString, | ||
+ | gnssVerticalSpeed DisplayString, | ||
+ | gnssTrackAngle DisplayString | ||
} | } | ||
Line 360: | Line 649: | ||
STATUS current | STATUS current | ||
DESCRIPTION | DESCRIPTION | ||
- | "The current number of available satellites for the GNSS device" | + | "The current number of satellites in view for the GNSS device" |
::= { nbGnssEntry 7 } | ::= { nbGnssEntry 7 } | ||
+ | |||
+ | gnssNumSatUsed OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The current number of used satellites for the GNSS device" | ||
+ | ::= { nbGnssEntry 8 } | ||
+ | |||
+ | gnssHorizontalSpeed OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The current horizontal speed over the ground value in meter per second received by the GNSS device" | ||
+ | ::= { nbGnssEntry 9 } | ||
+ | |||
+ | gnssVerticalSpeed OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The current vertical speed value in meter per second received by the GNSS device" | ||
+ | ::= { nbGnssEntry 10 } | ||
+ | |||
+ | gnssTrackAngle OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The current track angle value in degrees received by the GNSS device" | ||
+ | ::= { nbGnssEntry 11 } | ||
Line 389: | Line 710: | ||
wlanModuleName DisplayString, | wlanModuleName DisplayString, | ||
wlanModuleType DisplayString, | wlanModuleType DisplayString, | ||
- | wlanNumClients Integer32 | + | wlanNumClients Integer32, |
- | | + | wlanModuleChannel Integer32, |
+ | wlanModuleFrequency Integer32, | ||
+ | wlanSignalStrength Integer32 | ||
} | } | ||
Line 422: | Line 745: | ||
STATUS current | STATUS current | ||
DESCRIPTION | DESCRIPTION | ||
- | "Current number of clients connected to the WLAN module (if operated as access point)" | + | "Current number of clients connected to the WLAN module in access-point mode" |
::= { nbWlanEntry 4 } | ::= { nbWlanEntry 4 } | ||
+ | wlanModuleChannel OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "Current channel of the WLAN module" | ||
+ | ::= { nbWlanEntry 5 } | ||
+ | |||
+ | wlanModuleFrequency OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | UNITS "MHz" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "Current frequency of the WLAN module" | ||
+ | ::= { nbWlanEntry 6 } | ||
+ | |||
+ | wlanSignalStrength OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | UNITS "dBm" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "Current signal strength of the WLAN module in client mode" | ||
+ | ::= { nbWlanEntry 7 } | ||
+ | |||
+ | -- **************************************************************************** | ||
+ | -- NBWlanStationTable | ||
+ | -- **************************************************************************** | ||
+ | |||
+ | nbWlanStationTable OBJECT-TYPE | ||
+ | SYNTAX SEQUENCE OF NBWlanStationEntry | ||
+ | MAX-ACCESS not-accessible | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "A table shows current connected clients " | ||
+ | ::= { nb 61 } | ||
+ | |||
+ | nbWlanStationEntry OBJECT-TYPE | ||
+ | SYNTAX NBWlanStationEntry | ||
+ | MAX-ACCESS not-accessible | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "An entry descibes one connected client" | ||
+ | INDEX { wlanStationIndex } | ||
+ | ::= { nbWlanStationTable 1 } | ||
+ | |||
+ | NBWlanStationEntry ::= SEQUENCE { | ||
+ | wlanStationIndex Integer32, | ||
+ | wlanStationInterface DisplayString, | ||
+ | wlanStationMac DisplayString, | ||
+ | wlanStationSignalStrength Integer32, | ||
+ | wlanStationBitrate Integer32, | ||
+ | wlanStationRxBytes Counter64, | ||
+ | wlanStationTxBytes Counter64, | ||
+ | wlanStationInactive Integer32 | ||
+ | } | ||
+ | |||
+ | wlanStationIndex OBJECT-TYPE | ||
+ | SYNTAX Integer32(0..254) | ||
+ | MAX-ACCESS not-accessible | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WLAN station index" | ||
+ | ::= { nbWlanStationEntry 1 } | ||
+ | |||
+ | wlanStationInterface OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The WLAN interface name" | ||
+ | ::= { nbWlanStationEntry 2 } | ||
+ | |||
+ | wlanStationMac OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The MAC address of a connected station" | ||
+ | ::= { nbWlanStationEntry 3 } | ||
+ | |||
+ | wlanStationSignalStrength OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | UNITS "dBm" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The signal strength of a connected station" | ||
+ | ::= { nbWlanStationEntry 4 } | ||
+ | |||
+ | wlanStationBitrate OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | UNITS "Mbit/s" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The bitrate of a connected station" | ||
+ | ::= { nbWlanStationEntry 5 } | ||
+ | |||
+ | wlanStationRxBytes OBJECT-TYPE | ||
+ | SYNTAX Counter64 | ||
+ | UNITS "bytes" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The number of received bytes of a connected station" | ||
+ | ::= { nbWlanStationEntry 6 } | ||
+ | |||
+ | wlanStationTxBytes OBJECT-TYPE | ||
+ | SYNTAX Counter64 | ||
+ | UNITS "bytes" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The number of transmitted bytes of a connected station" | ||
+ | ::= { nbWlanStationEntry 7 } | ||
+ | |||
+ | wlanStationInactive OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | UNITS "ms" | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The inactivity time of a connected station" | ||
+ | ::= { nbWlanStationEntry 8 } | ||
+ | |||
+ | |||
+ | -- **************************************************************************** | ||
+ | -- NBWanTable | ||
+ | -- **************************************************************************** | ||
+ | |||
+ | nbHotLink OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "The active WAN link" | ||
+ | ::= { nb 70 } | ||
+ | |||
+ | nbWanTable OBJECT-TYPE | ||
+ | SYNTAX SEQUENCE OF NBWanEntry | ||
+ | MAX-ACCESS not-accessible | ||
+ | STATUS current | ||
+ | DESCRIPTION "The table describing any WAN link and their current status" | ||
+ | ::= { nb 71 } | ||
+ | |||
+ | nbWanEntry OBJECT-TYPE | ||
+ | SYNTAX NBWanEntry | ||
+ | MAX-ACCESS not-accessible | ||
+ | STATUS current | ||
+ | DESCRIPTION "An entry describing a WAN link and its current status" | ||
+ | INDEX { wanLinkIndex } | ||
+ | ::= { nbWanTable 1 } | ||
+ | |||
+ | NBWanEntry ::= SEQUENCE { | ||
+ | wanLinkIndex Integer32, | ||
+ | wanLinkName DisplayString, | ||
+ | wanLinkState DisplayString, | ||
+ | wanLinkSince DisplayString, | ||
+ | wanLinkType DisplayString, | ||
+ | wanLinkInterface DisplayString, | ||
+ | wanLinkAddress DisplayString, | ||
+ | wanLinkGateway DisplayString, | ||
+ | wanLinkNetmask DisplayString, | ||
+ | wanDialAttempts Integer32, | ||
+ | wanDialSuccess Integer32, | ||
+ | wanDialFailures Integer32, | ||
+ | wanDataDownloaded Integer32, | ||
+ | wanDataUploaded Integer32, | ||
+ | wanDownloadRate Integer32, | ||
+ | wanUploadRate Integer32, | ||
+ | wanDataDownloadedRoaming Integer32, | ||
+ | wanDataUploadedRoaming Integer32 | ||
+ | } | ||
+ | |||
+ | wanLinkIndex OBJECT-TYPE | ||
+ | SYNTAX Integer32(0..254) | ||
+ | MAX-ACCESS not-accessible | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link index" | ||
+ | ::= { nbWanEntry 1 } | ||
+ | |||
+ | wanLinkName OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link name" | ||
+ | ::= { nbWanEntry 2 } | ||
+ | |||
+ | wanLinkState OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link state" | ||
+ | ::= { nbWanEntry 3 } | ||
+ | |||
+ | wanLinkSince OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link since up" | ||
+ | ::= { nbWanEntry 4 } | ||
+ | |||
+ | wanLinkType OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link type" | ||
+ | ::= { nbWanEntry 5 } | ||
+ | |||
+ | wanLinkInterface OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link interface" | ||
+ | ::= { nbWanEntry 6 } | ||
+ | |||
+ | wanLinkAddress OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link address" | ||
+ | ::= { nbWanEntry 7 } | ||
+ | |||
+ | wanLinkGateway OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link gateway" | ||
+ | ::= { nbWanEntry 8 } | ||
+ | |||
+ | wanLinkNetmask OBJECT-TYPE | ||
+ | SYNTAX DisplayString | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link netmask" | ||
+ | ::= { nbWanEntry 9 } | ||
+ | |||
+ | wanDialAttempts OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link dial attempts" | ||
+ | ::= { nbWanEntry 10 } | ||
+ | |||
+ | wanDialSuccess OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link dial success" | ||
+ | ::= { nbWanEntry 11 } | ||
+ | |||
+ | |||
+ | wanDialFailures OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link dial failures" | ||
+ | ::= { nbWanEntry 12 } | ||
+ | |||
+ | |||
+ | wanDataDownloaded OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link data downloaded" | ||
+ | ::= { nbWanEntry 13 } | ||
+ | |||
+ | |||
+ | wanDataUploaded OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link data uploaded" | ||
+ | ::= { nbWanEntry 14 } | ||
+ | |||
+ | |||
+ | wanDownloadRate OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link download rate" | ||
+ | ::= { nbWanEntry 15 } | ||
+ | |||
+ | |||
+ | wanUploadRate OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link upload rate" | ||
+ | ::= { nbWanEntry 16 } | ||
+ | |||
+ | wanDataDownloadedRoaming OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link data downloaded during roaming" | ||
+ | ::= { nbWanEntry 17 } | ||
+ | |||
+ | wanDataUploadedRoaming OBJECT-TYPE | ||
+ | SYNTAX Integer32 | ||
+ | MAX-ACCESS read-only | ||
+ | STATUS current | ||
+ | DESCRIPTION | ||
+ | "WAN link data uploaded during roaming" | ||
+ | ::= { nbWanEntry 18 } | ||
-- **************************************************************************** | -- **************************************************************************** | ||
Line 502: | Line 1149: | ||
events OBJECT IDENTIFIER ::= { traps 0 } | events OBJECT IDENTIFIER ::= { traps 0 } | ||
+ | |||
+ | sdk-trap NOTIFICATION-TYPE | ||
+ | STATUS current | ||
+ | DESCRIPTION "SDK trap" | ||
+ | ::= { events 1 } | ||
wan-up NOTIFICATION-TYPE | wan-up NOTIFICATION-TYPE | ||
Line 662: | Line 1314: | ||
DESCRIPTION "System time has been updated" | DESCRIPTION "System time has been updated" | ||
::= { events 508 } | ::= { events 508 } | ||
+ | |||
+ | system-poweroff NOTIFICATION-TYPE | ||
+ | STATUS current | ||
+ | DESCRIPTION "System poweroff has been triggered" | ||
+ | ::= { events 509 } | ||
+ | |||
+ | system-error NOTIFICATION-TYPE | ||
+ | STATUS current | ||
+ | DESCRIPTION "System is in error state" | ||
+ | ::= { events 510 } | ||
+ | |||
+ | system-no-error NOTIFICATION-TYPE | ||
+ | STATUS current | ||
+ | DESCRIPTION "System left error state" | ||
+ | ::= { events 511 } | ||
sms-sent NOTIFICATION-TYPE | sms-sent NOTIFICATION-TYPE | ||
Line 732: | Line 1399: | ||
DESCRIPTION "USB serial device has been removed" | DESCRIPTION "USB serial device has been removed" | ||
::= { events 906 } | ::= { events 906 } | ||
+ | |||
+ | redundancy-master NOTIFICATION-TYPE | ||
+ | STATUS current | ||
+ | DESCRIPTION "System is now master router" | ||
+ | ::= { events 1001 } | ||
+ | |||
+ | redundancy-backup NOTIFICATION-TYPE | ||
+ | STATUS current | ||
+ | DESCRIPTION "System is now backup router" | ||
+ | ::= { events 1002 } | ||
END | END | ||
+ | |||
+ | |||
</code> | </code> |