Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
configuration:ip-pass-through [2016/11/15 13:27]
dotoli
configuration:ip-pass-through [2016/11/15 13:37]
dotoli [IP pass-through]
Line 3: Line 3:
 With IP pass through a connected device can be adressed directly with a public static WAN-IP address. With IP pass through a connected device can be adressed directly with a public static WAN-IP address.
  
-IP pass-through creates a subnet for the attached device (/29). Six addresses from the APN range are used. e.g. WAN-IP and gateway ​addresses+IP pass-through creates a subnet for the attached device (/29) including ​WAN-IP ​and gateway ​address
  
-Problem: In order that the used IP's are still reachable in the APN network, a smaller network must be configured:+Problem: In order that the used IP's are still reachable in the APN network, a smaller network ​(== more hosts per network\) ​must be configured:
  
 Example: Example: