Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
configuration:ip-pass-through [2016/11/15 10:46]
dotoli
configuration:ip-pass-through [2016/11/15 13:37]
dotoli [IP pass-through]
Line 1: Line 1:
  
 ====== IP pass-through ====== ====== IP pass-through ======
-IP pass-through creates a subnet (/29) consisting of the WAN-IP and gateway ​addresses.  +With IP pass through a connected device can be adressed directly with a public static WAN-IP address. 
-In order that the taken IP's are still reachable in the APN network, ​the subnet ​must be decreased:+ 
 +IP pass-through creates a subnet ​for the attached device ​(/29) including ​WAN-IP ​and gateway ​address.  
 + 
 +Problem: ​In order that the used IP's are still reachable in the APN network, ​a smaller network (== more hosts per network\) ​must be configured:
  
 Example: Example:
Line 12: Line 15:
  
  
-Without configured optional WAN network ​and WAN netmask the connected device receives +Without configured optional WAN networkWAN netmask the connected device receives: 
-10.203.1.2/​29 ​ gw 10.203.1.3. The IP's 10.203.1.1 - 10.203.1.6 are no reachable in the APN network.+10.203.1.2/​29 ​ gw 10.203.1.3.\\ The IP's 10.203.1.1 - 10.203.1.6 are no more reachable in the APN network.
  
-Decrease ​subnet:\\+Configure a smaller ​subnet:\\
 WAN network: 10.203.0.0\\ WAN network: 10.203.0.0\\
 WAN netmask: 255.255.0.0 \\  WAN netmask: 255.255.0.0 \\ 
Line 26: Line 29:
 The device receives: 10.203.1.2/​16 gw 10.203.128.0 The device receives: 10.203.1.2/​16 gw 10.203.128.0
  
-The gateway is outside the APN network but the hosts are still reachable ​+The gateway is outside ​of the APN network but the hosts are still reachable ​