This is an old revision of the document!

Two NB1600 connected through a GRE tunnel over the mobile interface.

TUN mode:

Peer address: Public IP address of the remote station (NB1600-X, cisco router …)
Local tunnel address/netmask: Self defined GRE IP address (remote router: 192.168.8.2)
Remote network: Destination network / Network of the remote router

TAP mode:

Peer address: Public IP address of the remote station (NB1600-X, cisco router …)
Bridge interface: LANX; the IP address on both sides must be in the same subnet. (e.g local=192.168.1.1 / remote=192.168.1.2)