Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
configuration:gre [2016/08/15 08:34]
dotoli
configuration:gre [2017/01/03 12:40]
dotoli
Line 1: Line 1:
-Two NB1600 connected through a GRE tunnel over the mobile interface.+Two NB1600 connected through a GRE tunnel over the mobile interface.\\ 
 +NB1: 192.168.1.0|192.168.2.0\\ 
 +NB2: 192.168.3.0|192.168.4.0\\ 
 +Both have public IP adresses, 138.188.X.X\\
  
  
-TUN mode:\\ +**TUN mode:**\\
-{{:​configuration:​gre_tun_a.jpg?​nolink&​800 |}}+
  
-Peer address: Public IP address of the remote station (NB1600-X, cisco router ...) +{{:​configuration:​gre_tun_a.jpg?​|}}\\ 
-Local tunnel address/​netmask:​ Self defined GRE IP address +  
-Remote network: Destination network / Network of the remote router+Peer address: Public IP address of the remote station (NB1600-X, cisco router ...)\\ 
 +Local tunnel address/​netmask:​ Self defined GRE IP address ​(remote router local tunnel address: 192.168.8.2)\\ 
 +Remote network: Destination network / Network of the remote router\\
  
  
 +**TAP mode:**\\
 +
 +{{:​configuration:​gre_tap.png?​|}}\\
 + 
 +Peer address: Public IP address of the remote station (NB1600-X, cisco router ...)\\
 +Bridge interface: LANX; the IP address on both sides must be in the same subnet. (e.g local=192.168.1.1 / remote=192.168.1.2) ​