Differences

This shows you the differences between two versions of the page.

--- configuration:1to1_napt [2015/05/19 12:32] – hess
+++ configuration:1to1_napt [2018/10/24 08:45] – fachet
@@ Line 1: / Line 1: @@
-====== 1:1 Network NAPT ======
+====== 1:1 Network NAT ======
-With 1:1 NAPT you can Map a whole network IP-range into another. This can be handy if you want to maintain a common local ip range like 192.168.1.0/24 but also have the possibilty to connect to each IP from the outside
+With 1:1 NAT you can Map a whole network IP-range into another. This can be handy if you want to maintain a common local ip range like 192.168.1.0/24 but also have the possibilty to connect to each IP from the outside
+{{:configuration:1-1nat.jpg|}}
 Common Example: A Tram installed with a lot of devices like: ticketmachines, videocameras or WLAN Accesspoint. The local technican wants to connect
@@ Line 27: / Line 29: @@
 To Configure this scenario all you need are two rules
-  * Inbound NAPT Rule
+  * Inbound NAT Rule
 {{ :nrsw:screenshot_-_140415_-_11_32_57.png?600 |}}
-  * Outbound NAPT Rule
+  * Outbound NAT Rule
 {{ :nrsw:screenshot_-_140415_-_11_39_52.png?600 |}}