NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
config:link-supervision [2018/03/27 07:59] – [Use the Link supervison for a stable connection] grayconfig:link-supervision [2021/11/10 11:24] (current) – schmitt
Line 8: Line 8:
 In the INTERFACES tab and the sub-item Supervision the option is set up. Click here for the plus button and enter a sub menu. In the INTERFACES tab and the sub-item Supervision the option is set up. Click here for the plus button and enter a sub menu.
  
-{{:configuration:linksupervision_1.png?direct&900|}}+{{superlink.png?direct&900|}}
  
  
 In the sub menu you can set up a link monitoring for the WWAN interface. In the sub menu you can set up a link monitoring for the WWAN interface.
  
-{{:configuration:linksupervision_2.png?direct&900|}}+{{superlink_config.png?direct&900|}}
  
 For WWAN (UMTS / LTE) connections, you should use the "Mode only validate if link is up" option under the Mode option. The option "also validate when link comes up" could be prone to error for WWAN connection because the connection negotiation takes much longer than with a LAN connection in the own network.  For WWAN (UMTS / LTE) connections, you should use the "Mode only validate if link is up" option under the Mode option. The option "also validate when link comes up" could be prone to error for WWAN connection because the connection negotiation takes much longer than with a LAN connection in the own network. 

Page Tools

config/link-supervision.1522137593.txt.gz · Last modified: 2018/03/27 07:59 by gray