Differences

This shows you the differences between two versions of the page.

--- app-notes:using-the-ap3400 [2026/02/04 09:41] – [2. Set up the access points] gray
+++ app-notes:using-the-ap3400 [2026/03/12 10:19] (current) – [3. Additional information] gray
@@ Line 111: / Line 111: @@
 </konsole>
-This command imports the new .json file back into the access point. It is very important that the certificates are not overwritten during this process and remain empty. Otherwise, you would lock yourself out of the system and would no longer be able to log in.
+This command imports the new ''".json"'' file back into the access point. It is very important that the certificates are not overwritten during this process and remain empty. Otherwise, you would lock yourself out of the system and would no longer be able to log in.
 To fix this, you will need the first console for the AP3400. Use the ''“passwd”'' command to reset the password in the router, and you will then be able to log in normally again.
@@ Line 133: / Line 133: @@
 ===== - Additional information =====
- * Webpage AP3400 [[https://www.netmodule.com/de/support/portfolio-changes/access-point|Webpage AP3400]]
+ * Webpage AP3400 [[https://www.belden.com/products/industrial-networking-cybersecurity/wireless/railway-routers/ap3400-2wax-fcc|Webpage AP3400]]
  * System Manual AP3400 [[https://www.netmodule.com/uploads/files/produkte/Access-Point/AP3400/AP3400_MANUAL_DE.pdf|System Manual]]