NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
app-notes:set-fixed-frame [2026/09/30 11:25] – [2. Make additional settings in the container] grayapp-notes:set-fixed-frame [2026/09/30 15:05] (current) – [3. Additional information] gray
Line 142: Line 142:
 ~ $ vi /etc/lxc/guest0/config ~ $ vi /etc/lxc/guest0/config
                                                                                                                        
-# Setting up a USB flash drive in the LXC container +# Setting up a USB drive in the LXC container 
 lxc.cgroup.devices.allow = c 188:1 rwm lxc.cgroup.devices.allow = c 188:1 rwm
 lxc.mount.entry = /dev/ttyUSB1 dev/ttyUSB1 none bind,optional,create=file 0 0    lxc.mount.entry = /dev/ttyUSB1 dev/ttyUSB1 none bind,optional,create=file 0 0   
Line 156: Line 156:
 <konsole> <konsole>
 ~ $ lxc-attach guest0 ~ $ lxc-attach guest0
-root@LXCNAME:~# apt install gpsd python3-gpsapt gpsd-clients python3-paramiko nano+root@LXCNAME:~# apt install gpsd python3-gps gpsd-clients python3-paramiko nano
 root@LXCNAME:~# root@LXCNAME:~#
 </konsole> </konsole>
Line 359: Line 359:
 <konsole> <konsole>
 root@LXCNAME:~/ubx_neo_m8l# python3 ssh_start.py 10 root@LXCNAME:~/ubx_neo_m8l# python3 ssh_start.py 10
-Setze gpsd.0.status=0 ... +Setze gpsd.1.status=0 ... 
-Versuch 1/2: call set_cfg_rate_neom8l.py auf...+Versuch 1/2: call set_cfg_rate_neom8l.py on...
 STDOUT:  STDOUT: 
 STDERR: 2026-09-30 10:39:20,427 INFO     instantiating GnssUBlox on tty STDERR: 2026-09-30 10:39:20,427 INFO     instantiating GnssUBlox on tty
Line 368: Line 368:
 root@LXCNAME:~/ubx_neo_m8l# root@LXCNAME:~/ubx_neo_m8l#
 </konsole> </konsole>
 +
 +Then test the whole thing with a get script.
 +
 +<konsole>
 +root@LXCNAME:~/ubx_neo_m8l# python3 get_cfg_rate_neom8l.py 
 +2026-09-30 11:53:44,917 INFO     instantiating GnssUBlox on tty
 +2026-09-30 11:53:44,917 INFO     using device /dev/ttyUSB1
 +UBX-CFG-RATE cls:06 id:08
 +  measRate: 100
 +  navRate: 1
 +  timeRef: 0
 +root@LXCNAME:~/ubx_neo_m8l# 
 +</konsole>
 +
  
 ---- ----
Line 397: Line 411:
     rate_hz = int(sys.argv[1])     rate_hz = int(sys.argv[1])
     if not (1 <= rate_hz <= 10):     if not (1 <= rate_hz <= 10):
-        raise ValueErro# Name ggf. anpassen, s.u. +        raise ValueErro
-r+
 except ValueError: except ValueError:
     print("Error: frame interval must be an integer between 1 and 10")     print("Error: frame interval must be an integer between 1 and 10")
Line 452: Line 465:
  
  
-def run_remote2command(client, cmd):+def run_remote_command(client, cmd):
     stdin, stdout, stderr = client.exec_command(cmd)     stdin, stdout, stderr = client.exec_command(cmd)
     out = stdout.read().decode().strip()     out = stdout.read().decode().strip()
Line 548: Line 561:
  
 poll_msg = UbxCfgRatePoll() poll_msg = UbxCfgRatePoll()
-response = ubx.poll(poll_msg)   +response = ubx.poll(poll_msg)  
 +print(response)
  
 ubx.cleanup() ubx.cleanup()

Page Tools

app-notes/set-fixed-frame.1790767553.txt.gz · Last modified: 2026/09/30 11:25 by gray