Differences

This shows you the differences between two versions of the page.

--- app-notes:samba-server [2026/02/11 15:56] – [1. Set up the LXC Contianer] gray
+++ app-notes:samba-server [2026/02/11 20:45] (current) – [2. Adjust the LXC config so that the USB port can be used in the container.] gray
@@ Line 19: / Line 19: @@
 **
+----
 ===== - Set up the LXC Contianer =====
@@ Line 33: / Line 34: @@
 From a Jenkins server you get the current image for the container
-* Jenkins Server Page image-alpine ''tinycloud'' / [[https://jenkins.linuxcontainers.org/view/Images/job/image-alpine//|Link]]
+* Jenkins Server Page image-alpine ''default'' / [[https://jenkins.linuxcontainers.org/view/Images/job/image-alpine//|Link]]
 The "''armhf''" tab is important here
@@ Line 39: / Line 40: @@
 Here you can get a alpine image for '' 3.21, 3.22, 3.23 or newer''.
+{{:app-notes:lxc_samba.png?800}}
+The image is the "''rootfs.tar.xz''" which is required. With a right click you can copy the link.
+It would be structured like this:
+''https://jenkins.linuxcontainers.org/view/Images/job/image-alpine/architecture=armhf,release=3.23,variant=default/3550/artifact/rootfs.tar.xz''
+When the "Apply" button is pressed, Debian will be installed.
+Set up the LXC container further. A network interface is enabled here.
+{{:pictures:lxc_netzwerk.png?800|}}
+The container has now also been assigned an IP address.
+<konsole>
+~ $ lxc-info guest0
+Name:           guest0
+State:          RUNNING
+PID:            2255
+IP:             192.168.1.149
+CPU use:        1.57 seconds
+BlkIO use:      4.00 KiB
+Memory use:     6.29 MiB
+KMem use:       1.18 MiB
+Link:           virt0
+ TX bytes:      2.28 KiB
+ RX bytes:      853 bytes
+ Total bytes:   3.11 KiB
+~ $
+</konsole>
+Always assign a fixed IP address for the LXC container via the DHCP server.
+{{:pictures:lxc_ip_adresse.png?800|}}
+Log in to the LXC container and test whether it can access the Internet.
+<konsole>
+~ $ lxc-attach guest0
+root@LXCNAME:~# ping heise.de
+PING heise.de (193.99.144.80) 56(84) bytes of data.
+bytes from redirector.heise.de (193.99.144.80): icmp_seq=1 ttl=244 time=42.4 ms
+bytes from redirector.heise.de (193.99.144.80): icmp_seq=2 ttl=244 time=31.0 ms
+bytes from redirector.heise.de (193.99.144.80): icmp_seq=3 ttl=244 time=27.1 ms
+--- heise.de ping statistics ---
+packets transmitted, 3 received, 0% packet loss, time 2005ms
+rtt min/avg/max/mdev = 27.116/33.504/42.432/6.505 ms
+root@LXCNAME:~#
+</konsole>
+The container is installed and set up. Now you can set up further tools on the container.
+----
+===== - Adjust the LXC config so that the USB port can be used in the container. =====
+Enable USB administration on the router
+{{:app-notes:lxc_usb_port.png?800|}}

User Tools

Site Tools

Differences

Page Tools