NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
app-notes:ipsec-fritzbox [2021/11/24 14:19] – [Table] klueppelapp-notes:ipsec-fritzbox [2021/11/25 09:00] (current) – klueppel
Line 2: Line 2:
 This has been tested with Netmodule SW 4.5.0.106 and Fritz!OS: 07.28. This has been tested with Netmodule SW 4.5.0.106 and Fritz!OS: 07.28.
  
-At first, we configure the Fritzbox to accept VPN LAN2LAN connection.+At first, we configure the Fritzbox to accept VPN LAN2LAN connection. Make sure your FritzBox has a static IP or set up DnynamicDNS. In Our example we use DynamiDNS with the hostname: netbox.ddns.net 
 +Instructions can be found at AVM https://avm.de/service/wissensdatenbank/dok/FRITZ-Box-7590/30_Dynamic-DNS-in-FRITZ-Box-einrichten/
  
 Internet -> Permit Access -> VPN: Add VPN Connection Internet -> Permit Access -> VPN: Add VPN Connection
Line 12: Line 13:
 | VPN password (pre-shared key)    | admin01admin01      | | VPN password (pre-shared key)    | admin01admin01      |
 | Name of the VPN connection       | LAN2LAN             | | Name of the VPN connection       | LAN2LAN             |
-| Web address of the remote site   | 1.2.3.4*            | +| Web address of the remote site*  | 1.2.3.4            | 
-| Web address of this FRITZ!Box    | netmodule.ddns.net  |+| Web address of this FRITZ!Box*2  | netmodule.ddns.net  |
 | Remote network                   | 192.168.1.0         | | Remote network                   | 192.168.1.0         |
 | Subnet mask                      | 255.255.255.0       | | Subnet mask                      | 255.255.255.0       |
 | Hold VPN connection permanently  | checked             | | Hold VPN connection permanently  | checked             |
  
 +*This value needs to be set on Netmodule Router as LocalID, Local ID Type IP-Address
 Click OK to save the changes. Click OK to save the changes.
 +
 +*2 Please use your configured hostname.
  
 Now we can configure the netmodule router: Now we can configure the netmodule router:
Line 28: Line 32:
 |            Config mode |                                     standard | |            Config mode |                                     standard |
 |          Local address |                                      0.0.0.0 | |          Local address |                                      0.0.0.0 |
-|    Remote peer address |  netmodule.ddns.net (This has been set in 4) |+|    Remote peer address |                           netmodule.ddns.net |
  
  

Page Tools

app-notes/ipsec-fritzbox.1637763543.txt.gz · Last modified: 2021/11/24 14:19 by klueppel