Differences

This shows you the differences between two versions of the page.

--- app-notes:hayes-modem-at-simulator [2018/05/08 17:08] – [Configuration] cakir
+++ app-notes:hayes-modem-at-simulator [2018/05/08 17:10] – [Field Legacy Mode] cakir
@@ Line 66: / Line 66: @@
   * Connect your Device to the Serial Interface
-If you are working via the OpenVPN Server you will have following Adressing:
+If you are working via the OpenVPN Server you will have following Addressing:
   * OpenVPN Server: **10.8.0.1**
@@ Line 73: / Line 73: @@
 {{ :app-notes:openvpn_status.png?nolink |}}
-Based on this Adressing you can call the the device in the field as follows:
+Based on this Addressing you can call the the device in the field as follows:
 ==== Full Legacy Mode ====
@@ Line 83: / Line 83: @@
 ==== Field Legacy Mode ====
-In Case you want to have the connection from a central point to the devices in the fields there is no need to integrade the model emulator on the server side.
+In Case you want to have the connection from a central point to the devices in the fields there is no need to integrate the model emulator on the server side.
-If you can skip the AT Commands on the Server side you can just initiate a tcp connection to the tcp Port of the field devices. It initiate the same procedure as an incomming call and will have the same output on the serial interface as in the full legacy Mode.
+If you can skip the AT Commands on the Server side you can just initiate a tcp connection to the tcp Port of the field devices. It initiate the same procedure as an incoming call and will have the same output on the serial interface as in the full legacy Mode.

User Tools

Site Tools

Differences

Page Tools