Differences

This shows you the differences between two versions of the page.

--- app-notes:hailo-8-acceleration [2026/10/31 20:58] – [Prerequisites] gray
+++ app-notes:hailo-8-acceleration [2026/11/01 12:47] (current) – [1. Installing the Module into the Router Hardware] gray
@@ Line 17: / Line 17: @@
     * NetModule NB2800/NB2810 Wireless Router with wireless connection
-    * NetModule Software with AI Core DX-M1 Chip Support for NB2800 [[https://files.netmodule.com/share/bYLKSkoQ|NB2800]]  Password for the download: ''"ai-chip"''
+    * NetModule Software with Hailo-8 AI Chip Support for NB2800 [[https://files.netmodule.com/share/vhtlzzda|NB2800]]  Password for the download: ''"ai-chip"''
-    * NetModule Software with AI Core DX-M1 Chip Support for NB2810 [[https://files.netmodule.com/share/y4qgvj2v|NB2810]] Password for the download: ''"ai-chip"''
+    * NetModule Software with Hailo-8 AI Chip Support for NB2810 [[https://files.netmodule.com/share/gbse0zuK|NB2810]] Password for the download: ''"ai-chip"''
     * Not available for legacy products NB1600, NB2700, NB3700, NB3710
@@ Line 25: / Line 25: @@
 The wiki was tested with router software nrsw-image-2800-0.0.0.0.img and the LXC container with debina 13 armhf (trixie)
 </WRAP>
 ----
+===== - Installing the Module into the Router Hardware =====
+An adapter is required for the Hailo-8 AI chip to be used with the router. The PCI Express interfaces are implemented as Mini PCIe on the router board. The Hailo-8 AI chip requires a Mini PCIe to M.2 M-key adapter.
+{{:app-notes:hailo8_modul.jpg?800|}}
+The NB2800's circuit board features a DC/DC converter that supplies 3.3 volts to the two Mini-PCIe slots. The maximum output current is 6 amps. A maximum of 12 watts is available for the Mini-PCIe modules. The Hailo-8 AI chip has a maximum power consumption of less than 5 watts.
+The module can be installed in slot 1 or 2 on the NB2800.
+{{:app-notes:ki_pcie.png?300|}}
+ The Hailo-8 AI chip was inserted into the first slot
+To ensure communication between the chip and the router, the module must be configured as Wi-Fi in the BD.
+<konsole>
+=== BDINFO ===
+bd/0/pd_module0:           slot=0,caps=wlan-main:wlan-aux
+bd/0/pd_module1:           slot=1,caps=wlan-main:wlan-aux
+bd/0/pd_module2:           slot=2,caps=wwan-main:wwan-aux:gnss-active:voice
+</konsole>
+You can check whether the module is present via the router's console.

User Tools

Site Tools

Differences

Page Tools