NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
app-notes:hailo-8-acceleration [2026/10/31 20:56] – [Goal] grayapp-notes:hailo-8-acceleration [2026/11/01 12:47] (current) – [1. Installing the Module into the Router Hardware] gray
Line 9: Line 9:
  
 ---- ----
 +=== Modules in the router ===
 +
 +{{:app-notes:hailo8_chip.jpg?800|}}
 +----
 +
 +===== Prerequisites =====
 +
 +    * NetModule NB2800/NB2810 Wireless Router with wireless connection
 +    * NetModule Software with Hailo-8 AI Chip Support for NB2800 [[https://files.netmodule.com/share/vhtlzzda|NB2800]]  Password for the download: ''"ai-chip"''
 +    * NetModule Software with Hailo-8 AI Chip Support for NB2810 [[https://files.netmodule.com/share/gbse0zuK|NB2810]] Password for the download: ''"ai-chip"''
 +    * Not available for legacy products NB1600, NB2700, NB3700, NB3710
 +
 +
 +<WRAP center round important 90%>
 +The wiki was tested with router software nrsw-image-2800-0.0.0.0.img and the LXC container with debina 13 armhf (trixie)
 +</WRAP>
 +
 +----
 +
 +===== - Installing the Module into the Router Hardware =====
 +
 +An adapter is required for the Hailo-8 AI chip to be used with the router. The PCI Express interfaces are implemented as Mini PCIe on the router board. The Hailo-8 AI chip requires a Mini PCIe to M.2 M-key adapter.
 +
 +{{:app-notes:hailo8_modul.jpg?800|}}
 +
 +The NB2800's circuit board features a DC/DC converter that supplies 3.3 volts to the two Mini-PCIe slots. The maximum output current is 6 amps. A maximum of 12 watts is available for the Mini-PCIe modules. The Hailo-8 AI chip has a maximum power consumption of less than 5 watts.
 +
 +The module can be installed in slot 1 or 2 on the NB2800. 
 +
 +
 +{{:app-notes:ki_pcie.png?300|}}
 + The Hailo-8 AI chip was inserted into the first slot
 +
 +To ensure communication between the chip and the router, the module must be configured as Wi-Fi in the BD.
 +
 +<konsole>
 +=== BDINFO ===
 +bd/0/pd_module0:           slot=0,caps=wlan-main:wlan-aux                    
 +bd/0/pd_module1:           slot=1,caps=wlan-main:wlan-aux                    
 +bd/0/pd_module2:           slot=2,caps=wwan-main:wwan-aux:gnss-active:voice               
 +</konsole>
 +
 +You can check whether the module is present via the router's console.
 +

Page Tools

app-notes/hailo-8-acceleration.1793480160.txt.gz · Last modified: by gray