NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
app-notes:changing-password [2026/09/01 12:45] – [3. Additional information] grayapp-notes:changing-password [2026/09/08 12:57] (current) – [3. Additional information] gray
Line 315: Line 315:
          sleep(1);          sleep(1);
    }    }
 +   # Store password unencrypted
 +         store_password = sprintf("user.%s.store_pw",nb_config_get("custom.var0"));
 +         save = nb_config_get(store_password);
 +         if(save == '1'){
 +           store_encrypt = sprintf("user.%s.password=%s",nb_config_get("custom.var0"),pass);
 +           nb_config_set(store_encrypt);
 +           ret = nb_config_done();
 +           while (ret){
 +                printf("The config parameter set two is in the execution: %s\n",ret);
 +                ret = nb_config_done();
 +                sleep(1);
 +           }
 +         }
    nb_config_set("custom.var0=");    nb_config_set("custom.var0=");
    nb_config_set("custom.var1=");    nb_config_set("custom.var1=");
Line 320: Line 333:
    daten = '';    daten = '';
    password = '';    password = '';
 +   store_encrypt = '';
  }  }
  printf("Wait for two seconds\n");  printf("Wait for two seconds\n");
Line 596: Line 610:
          sleep(1);          sleep(1);
    }    }
 +   # Store password unencrypted
 +         store_password = sprintf("user.%s.store_pw",nb_config_get("custom.var0"));
 +         save = nb_config_get(store_password);
 +         if(save == '1'){
 +           store_encrypt = sprintf("user.%s.password=%s",nb_config_get("custom.var0"),pass);
 +           nb_config_set(store_encrypt);
 +           ret = nb_config_done();
 +           while (ret){
 +                printf("The config parameter set two is in the execution: %s\n",ret);
 +                ret = nb_config_done();
 +                sleep(1);
 +           }
 +         }
    nb_config_set("custom.var0=");    nb_config_set("custom.var0=");
    nb_config_set("custom.var1=");    nb_config_set("custom.var1=");
Line 601: Line 628:
    daten = '';    daten = '';
    password = '';    password = '';
 +   store_encrypt = '';
  }  }
  printf("Wait for two seconds\n");  printf("Wait for two seconds\n");
Line 607: Line 635:
 </code> </code>
 ++++ ++++
 +
 +If you want to automatically reset passwords to a fixed default password, you can use these two scripts.
  
 The script resets the stored user passwords to a default password every month. The script resets the stored user passwords to a default password every month.
 The ''“Set_a_default_password_every_month.are”'' script.  The ''“Set_a_default_password_every_month.are”'' script. 
  
-++++show code| +++++show code|
 <code – Set_a_default_password_every_month.are> <code – Set_a_default_password_every_month.are>
 # The script resets the stored user passwords to a default password every month. # The script resets the stored user passwords to a default password every month.
Line 683: Line 713:
         for (i = 0; i < 20; i++){         for (i = 0; i < 20; i++){
           user_temp = nb_config_get(sprintf("user.%s.name",i));           user_temp = nb_config_get(sprintf("user.%s.name",i));
-           if(user_temp != ''){+ 
 +           if(user_temp != ''){   // The loop runs through every user  
 +                                  // who has been added to the system.  
 +                                  // If you want to reset only a specific user,  
 +                                  // you can do so by making this change    
 +                                  // if(user_temp == “<username>”) { 
            daten = sprintf("user.%s.hash=%s",i,password);            daten = sprintf("user.%s.hash=%s",i,password);
            nb_config_set(daten);            nb_config_set(daten);
Line 689: Line 725:
            while (ret){            while (ret){
                 printf("The config parameter set is in the execution: %s\n",ret);                 printf("The config parameter set is in the execution: %s\n",ret);
 +                ret = nb_config_done();
 +                sleep(1);
 +           }
 +         }
 +         # Store password unencrypted
 +         store_password = sprintf("user.%s.store_pw",i);
 +         save = nb_config_get(store_password);
 +         if(save == '1'){
 +           store_encrypt = sprintf("user.%s.password=%s",i,pass);
 +           nb_config_set(store_encrypt);
 +           ret = nb_config_done();
 +           while (ret){
 +                printf("The config parameter set two is in the execution: %s\n",ret);
                 ret = nb_config_done();                 ret = nb_config_done();
                 sleep(1);                 sleep(1);
Line 699: Line 748:
         daten = '';         daten = '';
         password = '';         password = '';
 +        store_encrypt = '';
       }       }
     }     }
Line 705: Line 755:
 </code> </code>
 ++++ ++++
 +
 +The script resets the stored user passwords to a default password every week.
 +The ''“Set_a_default_password_every_week.are”'' script. 
  
 ++++show code|  ++++show code| 
-<code – web_changing_password.are> +<code – Set_a_default_password_every_week.are> 
- test+ # The script resets the stored user passwords to a default password every week. 
 + 
 +nb_config_set("custom.var4=admin12345");  # Set the default password here 
 +last_run_week = ""; 
 + 
 +string telnet(ip, port, user, password, cmd) 
 +{ 
 +  if ((sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0) return NULL; 
 +  if (connect(sock, ip, port) < 0) return NULL; 
 +  try { 
 +    if ((buf = recv(sock)) == NULL || strlen(buf) < 3) throw NULL; 
 +    buf = explode(buf); 
 +    if (buf[0] == "\xff") // is command 
 +    { 
 +      if (buf[1] == "\xfd" && buf[2] == "\d031") { //negotiate 
 +        if (send(sock, "\d255\d251\d031") == -1) throw NULL; 
 +        if (send(sock, "\d255\d250\d031\d000\d080\d000\d024\d255\d240") == -1) throw NULL; 
 +      } else { 
 +        for (i = 0; i < strlen(buf); i++) 
 +          if (buf[i] == "\xfd") buf[i] = "\xfc"; 
 +          else if (buf[i] == "\xfb") buf[i] = "\xfd"; 
 +          if (send(sock, implode(buf)) == -1) throw NULL; 
 +          } 
 +    } 
 +    if ((buf = recv(sock)) == NULL || strlen(buf) < 1) throw NULL; // user ? 
 +    if (send(sock, strcat(user, "\r\n")) == -1) throw NULL; 
 +    if ((buf = recv(sock)) == NULL || strlen(buf) < 1)throw NULL; // password ? 
 +    if (send(sock, strcat(password, "\r\n")) == -1) throw NULL; 
 +    while((s = select(sock, 1)) > 0 && (buf = recv(sock)) != NULL && strlen(buf) > 0) 
 +      if (s == -1) throw NULL; //ignore all garbage 
 +      if (send(sock, strcat(cmd, "\r\n")) == -1) throw NULL;  //send command 
 +      rbuf =""; 
 +    while((s = select(sock, 1)) > 0 && (buf = recv(sock)) != NULL && strlen(buf) > 0){ 
 +      if (s == -1) throw NULL; 
 +      else rbuf = strcat(rbuf, buf); // collect return 
 +    } 
 +    rbuf = right(rbuf, strlen(rbuf) - strlen(cmd) - 2); //cut cmd 
 +    if (pos = strrchr(rbuf, "\r")) 
 +      rbuf = left(rbuf, pos); 
 +    throw rbuf; 
 +  } catch (ret) { 
 +    close (sock); 
 +    return ret; 
 +  } 
 +} 
 + 
 +while (true){ 
 +    now = time(); 
 +    dt  = localtime(now); 
 +    /* Debug: Current Time */ 
 +    stamp = strftime("%Y-%m-%d %H:%M:%S", dt); 
 +    printf("Time: %s\n", stamp); 
 +    /* ISO week string (YYYY-WW) and weekday */ 
 +    week_str    = strftime("%G-%V", dt);  /* e.g. "2026-36" */ 
 +    weekday_str = strftime("%u", dt);     /* "1"=Mon ... "7"=Sun */ 
 +    /* Debug: Status */ 
 +    printf("weekday=%s week=%s last=%s\n", weekday_str, week_str, last_run_week); 
 +    /* Run exactly once per week on Monday */ 
 +    if (weekday_str == "1" && week_str != last_run_week) { 
 +        pass = nb_config_get("custom.var4"); 
 +      if (pass != ''){ 
 +        command = strcat("cryptpw -m sha256 \x22", pass, "\x22"); 
 +        password = strcat(telnet("192.168.1.1", 65023, "root", "<admin-password>", command)); 
 +        sleep(1); 
 +        for (;password == "";){ 
 +           password = strcat(telnet("192.168.1.1", 65023, "root", "<admin-password>", command)); 
 +           sleep(2); 
 +        } 
 +        for (i = 0; i < 20; i++){ 
 +          user_temp = nb_config_get(sprintf("user.%s.name",i)); 
 +           
 +           if(user_temp != ''){   // The loop runs through every user  
 +                                  // who has been added to the system.  
 +                                  // If you want to reset only a specific user,  
 +                                  // you can do so by making this change    
 +                                  // if(user_temp == “<username>”) { 
 +            
 +            
 +            
 +           daten = sprintf("user.%s.hash=%s",i,password); 
 +           nb_config_set(daten); 
 +           ret = nb_config_done(); 
 +           while (ret){ 
 +                printf("The config parameter set is in the execution: %s\n",ret); 
 +                ret = nb_config_done(); 
 +                sleep(1); 
 +           } 
 +         } 
 +         # Store password unencrypted 
 +         store_password = sprintf("user.%s.store_pw",i); 
 +         save = nb_config_get(store_password); 
 +         if(save == '1'){ 
 +           store_encrypt = sprintf("user.%s.password=%s",i,pass); 
 +           nb_config_set(store_encrypt); 
 +           ret = nb_config_done(); 
 +           while (ret){ 
 +                printf("The config parameter set two is in the execution: %s\n",ret); 
 +                ret = nb_config_done(); 
 +                sleep(1); 
 +           } 
 +         } 
 +        } 
 +        last_run_week = week_str; 
 +        printf("Weekly run set for: %s\n", last_run_week); 
 +        pass = ''; 
 +        daten = ''; 
 +        password = ''; 
 +        store_encrypt = ''; 
 +      } 
 +    } 
 + sleep(3600); # check once per hour 
 +}
 </code> </code>
 ++++ ++++

Page Tools

app-notes/changing-password.1788266742.txt.gz · Last modified: by gray