NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
app-hotes:wwan-statistics [2025/11/24 16:35] – [3. Set up the SDK script on the router] grayapp-hotes:wwan-statistics [2025/11/24 17:16] (current) – [4. Important settings in the SDK script] gray
Line 332: Line 332:
  
 In the last step, we activate the SDK script on the router.  In the last step, we activate the SDK script on the router. 
 +
 +{{:app-hotes:volum_job.png?950|}}
  
 Again, enter the name for the SDK process first. If you want to activate the first SDK script on the router, the two fields “Trigger” and “Script” are already filled with the options you set up earlier. If you already have multiple scripts, you must select the correct option (Trigger and Script) from the pull-down menu. As before, click “Apply” to apply the setting to the router. In this case, the SDK script is also activated. Again, enter the name for the SDK process first. If you want to activate the first SDK script on the router, the two fields “Trigger” and “Script” are already filled with the options you set up earlier. If you already have multiple scripts, you must select the correct option (Trigger and Script) from the pull-down menu. As before, click “Apply” to apply the setting to the router. In this case, the SDK script is also activated.
  
 ---- ----
 +
 +{{:app-hotes:volum_status.png?950|}}
 +
 +Using the Administration option under point 1, you can view information under the Status tab, point 2, to see whether the SDK script has started correctly and is running without errors. 
 +
 +----
 +
  
  
 ===== - Important settings in the SDK script ===== ===== - Important settings in the SDK script =====
 +
 +**
 +<WRAP center round important 60%>
 +Please only make changes in this section of the block.
 +</WRAP>
 +**
 +
 +What options do you have for modifying the SDK script to suit your needs?
 +
 +{{:app-hotes:volum_skrip_info.png?950|}}
 +
 +Under ''point 1'', the interval can be determined by the SDK script. Here, ''1200 seconds (20 minutes)'' have been stored.
 +
 +Under ''point 2'', the data volume of the SIM card for one month can be stored. A volume of ''30 GB'' has been stored as an example.
 +
 +An email address must be entered under ''point 3''. Alarm and information messages will be sent to this address.
 +
 +A phone number for the SMS service must be entered under ''point 4''. Alarm messages will then be sent to this number when the SIM card has used up its volume for that month.
 +
 +Under ''point 5'', you can enter the time for alarm messages when ''90 percent'' of the data volume has been used up.
 +
 +Under ''point 6'', you can enter the time for information messages when ''75 percent'' of the data volume has been used up.
 +
 +Under ''point 7'', you can enter the time for information messages when ''50 percent'' of the data volume has been used up.
  
 ---- ----

Page Tools

app-hotes/wwan-statistics.1764002151.txt.gz · Last modified: 2025/11/24 16:35 by gray