Differences

This shows you the differences between two versions of the page.

--- app-hotes:ai-features [2026/06/24 13:04] – [The background to this project] gray
+++ app-hotes:ai-features [2026/06/24 15:13] (current) – [1. Installing the Module into the Router Hardware] gray
@@ Line 8: / Line 8: @@
 text
-=== Module into Router ===
+=== Modules in the router===
+----
 {{:app-notes:ki_chip.jpg?950|}}
@@ Line 27: / Line 28: @@
 ----
-=== Module into Router ===
+===== - Installing the Module into the Router Hardware =====
+An adapter is required for the Deepx DX-M1 AI chip to be used with the router. The PCI Express interfaces are implemented as Mini PCIe on the router board. The DX-M1 chip requires a Mini PCIe to M.2 M-key adapter.
+{{:app-notes:ki_adapter.jpg?900|}}
+The NB2800's circuit board features a DC/DC converter that supplies 3.3 volts to the two Mini-PCIe slots. The maximum output current is 6 amps. A maximum of 12 watts is available for the Mini-PCIe modules. The DX-M1 chip has a maximum power consumption of less than 5 watts.
+The module can be installed in slot 1 or 2 on the NB2800.
+{{:app-notes:ki_pcie.png?300|}}
+ The DX-M1 chip was inserted into the first slot
+text
+<konsole>
+=== BDINFO ===
+bd/0/pd_module0:           slot=0,caps=wlan-main:wlan-aux
+bd/0/pd_module1:           slot=1,caps=wlan-main:wlan-aux
+bd/0/pd_module2:           slot=2,caps=wwan-main:wwan-aux:gnss-active:voice
+bd/0/pd_module3:           slot=3,caps=wwan-main:wwan-aux:voice
+</konsole>
-{{:app-notes:ki_chip.jpg?950|}}
 ----
 ===== - Additional information =====

User Tools

Site Tools

Differences

Page Tools