NetModule Router Wiki

User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
app-hotes:ai-features [2026/06/24 12:11] – [1. Additional information] grayapp-hotes:ai-features [2026/06/24 15:13] (current) – [1. Installing the Module into the Router Hardware] gray
Line 3: Line 3:
 ===== Goal ===== ===== Goal =====
  
-This wiki shows you how to set up an AP3400 directly as an access point without needing a Netmodule router. However, this method does not allow for central administration or installation.+This wiki shows how to enable an AICore DX-M1 chip in the router and use it within an LXC container. It also explains how to set up additional utilities within the container.
  
-===== Prerequisites =====+===== The background to this project ===== 
 +text
  
 +=== Modules in the router===
 +----
  
-* AP3400 firmware [[https://share.netmodule.com/public/system-software/firmware/firmux-1.9.4-r5998-20230821-netmodule-ap3400-squashfs-sysupgrade.bin|firmux-1.9.4]] or newer+{{:app-notes:ki_chip.jpg?950|}} 
 + 
 +---- 
 +===== Prerequisites ===== 
 + 
 +    * NetModule NB2800 Wireless Router with wireless connection 
 +    * NetModule Software [[https://share.netmodule.com/public/system-software/5.0/5.0.0.103/|5.0.0.103]] or newer 
 +    * Not available for legacy products NB1600, NB2700, NB3700, NB3710
  
 ** **
-<WRAP center round important 60%> +<WRAP center round important 90%> 
-The wiki has been tested with AP3400 firmware 1.9.4.+The wiki was tested with router software nrsw-rootfs-HW17-0.0.0.0 and the LXC container with debina armhf 13.0
 </WRAP> </WRAP>
 ** **
  
 ---- ----
 +
 +===== - Installing the Module into the Router Hardware =====
 +
 +An adapter is required for the Deepx DX-M1 AI chip to be used with the router. The PCI Express interfaces are implemented as Mini PCIe on the router board. The DX-M1 chip requires a Mini PCIe to M.2 M-key adapter.
 +
 +{{:app-notes:ki_adapter.jpg?900|}}
 +
 +
 +The NB2800's circuit board features a DC/DC converter that supplies 3.3 volts to the two Mini-PCIe slots. The maximum output current is 6 amps. A maximum of 12 watts is available for the Mini-PCIe modules. The DX-M1 chip has a maximum power consumption of less than 5 watts.
 +
 +The module can be installed in slot 1 or 2 on the NB2800.
 +
 +{{:app-notes:ki_pcie.png?300|}}
 + The DX-M1 chip was inserted into the first slot
 +
 +text
 +
 +
 +
 +<konsole>
 +=== BDINFO ===
 +bd/0/pd_module0:           slot=0,caps=wlan-main:wlan-aux                    
 +bd/0/pd_module1:           slot=1,caps=wlan-main:wlan-aux                    
 +bd/0/pd_module2:           slot=2,caps=wwan-main:wwan-aux:gnss-active:voice  
 +bd/0/pd_module3:           slot=3,caps=wwan-main:wwan-aux:voice              
 +</konsole>
 +
 +
 +
 +
 +----
 +
 +
  
 ===== - Additional information ===== ===== - Additional information =====

Page Tools

app-hotes/ai-features.1782303065.txt.gz · Last modified: 2026/06/24 12:11 by gray