====== Set fake default route dynamically based on SSID ======
This script checks every 5 seconds which interface should be used as default gateway. As the default gateway is managed by the link-manager, a fake default gateway is configured by this script. \\
Conditions could be any, here it depend on which WLAN SSID the router is connected.
<code c set-route.are>
/* DESC: set route to server depending on active WWAN / WLAN network
 * Copyright (C) 2014 NetModule AG
 *
 */
 
nb_syslog("starting");
 
void restartIPsec(){ 
    nb_config_set("ipsec.status=0");
    sleep(6); // lower valus result in disabled ipsec admin status
    nb_config_set("ipsec.status=1");
}
void addRoute(int id, string interface, string destination, string netmask, string gateway){ 
    route = strcat("route." ,id, ".metric=", 0);
    route = strcat(route, " route." ,id, ".interface=", interface);
    route = strcat(route, " route." ,id, ".target=", destination);
    route = strcat(route, " route." ,id, ".netmask=", netmask);
    route = strcat(route, " route." ,id, ".gateway=", gateway);
    nb_config_set(route);
}   


lastWanInterface = "";
while (1) {
    wanInterface = "";
    status = nb_status("wan");
    wwan_status = status.WANLINK1_STATE;
    wlan_status = status.WANLINK2_STATE;
    wlan_network = status.WANLINK2_NETWORK;
    SERVER = nb_config_get("ipsec.0.remote.serverIp");
    nb_syslog("WLAN is %s with %s", wlan_status, wlan_network);
    nb_syslog("WWAN is %s", wwan_status);
    nb_syslog("routing traffic over %s", lastWanInterface); 

    if (wlan_status == "up" && wlan_network == "kis") { 
        // take wlan link for IPsec
        wanInterface = "wlan0";   
    } else if (wwan_status == "up" || wlan_status == "up" && wlan_network == "video") { 
        // take mobile link for IPsec
        wanInterface = "wwan0";
    }
    if (wanInterface != "" && wanInterface != lastWanInterface) {
        if (wanInterface == "wlan0") {
            addRoute(0, wanInterface, SERVER, "255.255.255.255", struct_get(status, "WANLINK2_GATEWAY"));
            addRoute(1, wanInterface, "0.0.0.0", "128.0.0.0", struct_get(status, "WANLINK2_GATEWAY"));
            addRoute(2, wanInterface, "128.0.0.0", "128.0.0.0", struct_get(status, "WANLINK2_GATEWAY"));
            nb_syslog("routing traffic over wlan"); 
        } else if (wanInterface == "wwan0") {    
            addRoute(0, wanInterface, SERVER, "255.255.255.255", struct_get(status, "WANLINK1_GATEWAY")); 
            addRoute(1, wanInterface, "0.0.0.0", "128.0.0.0", struct_get(status, "WANLINK1_GATEWAY"));
            addRoute(2, wanInterface, "128.0.0.0", "128.0.0.0", struct_get(status, "WANLINK1_GATEWAY"));
            nb_syslog("routing traffic over mobile"); 
        }
        restartIPsec();
        lastWanInterface = wanInterface;
    }
    sleep(5);
}
nb_syslog("exit");
exit(0);
</code>