====== How to add a router to the connectivity suite ======
The following artical describes how to add any netmodule router to a connectivity suite instance.

===== Requirements =====

1.Running Connectivity Suite instance
  * - valid device license
  * - opened port 50041 (provisioning server default port)
  * - One VPN Server Network configured
2.Netmodule router with
  * - Latest software 4.8.0.105 or higher
  * - Internet access
  * - SSH serives running on port 22 (default) mandatory

===== Generate provisioning config =====
1.Download the current user-config from the unit you want to add to your instance

{{:connectivity-suite:userdownload.png?600|}}

----
2.Add the user-config to your instance as shown:

{{:connectivity-suite:userprovisioning.png?600|}}

----
3.The connecticity suite automatically added the provisioning openvpn config parameter to your config. This is mandatory to connect to you instance.Download the provisiong config as shown:

{{:connectivity-suite:userprovisioningdownload.png?600|}}

----
4.Important: upload the provisioning user-config back to your router to apply the openvpn config parameter. Please use the shown "configuration mode" to apply only the provisiong vpn tunnel to your config:

{{:connectivity-suite:uploadprovisioning.png?600|}}

----
5. After all this steps the router suppose to appear on the provisioning dashboard section

{{:connectivity-suite:provisioningdashboard.png?600|}}

===== Move device to VPN Server =====

1. After the router successfully has been added to the provisioning you can easily assign a router to a VPN Server. Follow the shown steps and select a VPN Server:

{{:connectivity-suite:movedevice.png?600|}}

The connectivity suite deploys the new setting via the existing provisioning openvpn tunnel. This might take a few seconds.
After this step you have been added a router to a connectivity suite.