====== SNMP Agent ======

<WRAP center round important 100%>
Since software version 4.5.0.100 you need at least one user for SNMP access with the option "Store password unencrypted". 
This can be configured at SYSTEM->Authentification->User Accounts.
</WRAP>

**Operation mode: v1 | v2c | v3**\\
Read community: public  \\
This name can be used in order to get/set settings from/to **not** NetModule devices. 

Admin community:  e.g. admin \\
This name must be used in order to get/set settings from/to NetModule devices. \\           
Allowed host: only this host is allowed to get/set settings. \\

The whole net is configurable over cli:\\
cli set snmp.admin.host=192.168.1.0/24

iReasoning: Read and Write Community must be equal in order to get/set settings from/to NetModule devices.

**Operation mode: v3 only **\\
Use NetModule username "admin" and your password in order to get/set settings. \\
Other users are not allowed to change  settings.          

====== How to use ManageEngine MibBrowser ======

**1. Save the private MIB from the router**
{{:nrsw:snmpagent__conf.png}}

**2. Copy the private MIB into the ManageEngine mib directory**
{{ :nrsw:snmp_mibbrowser_2.png }}

**3. Load the MIB into ManageEngine(CTRL-O)**
{{ :nrsw:snmp_mibbrowser_3.png |}}

**4. Create user on the router**
	username: snmp
	password: snmpuser01''
{{ :nrsw:system_auth_useraccounts.png |}}

**5. Enable SNMP admin access on the router**
{{ :nrsw:SNMPAgent_auth2.png |}}

**6. Change v3 settings (ALT-S) and create a user**
	username: snmp
	password: snmpuser01

Attention must be paid to the fact that SNMP passwords have to be more than
8 characters long. Shorter passwords of router users have to be doubled for SNMP (e.g. admin01
becomes admin01admin01).
{{ :nrsw:snmp_mibbrowser_6.png |}}

**7. Ordered List Item7. Get values**
	press right mouse button -> GET
{{ :nrsw:snmp_mibbrowser_7.png |}}