Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
documentation:releases [2020/11/18 12:55] – [Active Releases] juraschek | documentation:releases [2024/04/30 09:46] – fricker |
---|
| |
==== Active Releases ==== | ==== Active Releases ==== |
| {{tablelayout?rowsHeaderSource=Auto}} |
| ^ Branch ^ State ^ Current Version ^ Releasenote ^ Current Date ^ First Release ^ End-Of-Support ^ |
| | 4.9 | rolling | [[http://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | [[http://share.netmodule.com/public/system-software/4.9/4.9.0.100/NRSW-RN-4.9.0.100.pdf|PDF]] | 2024-04-30 | 2024-04-30 | until release of 5.0 | |
| | 4.8 | LTS | [[http://share.netmodule.com/public/system-software/4.8/4.8.0.102/|4.8.0.102]] | [[http://share.netmodule.com/public/system-software/4.8/4.8.0.102/NRSW-RN-4.8.0.102.pdf|PDF]] | 2023-11-17 | 2023-07-17 | 2026-07-31 | |
| | 4.6 | LTS | [[http://share.netmodule.com/public/system-software/4.6/4.6.0.107/|4.6.0.107]] | [[http://share.netmodule.com/public/system-software/4.6/4.6.0.107/NRSW-RN-4.6.0.107.pdf|PDF]] | 2023-08-01 | 2021-11-05 | 2024-11-05 | |
| |
| |
^ Branch ^ State ^ Current Version ^ Current Date ^ First Release ^ End-Of-Support ^ | |
| 4.4 | STS |[[http://share.netmodule.com/public/system-software/4.4/4.4.0.105/|4.4.0.105]] |2020-08-31 |2019-10-31|2021-04-31*| | |
| 4.3 | LTS |[[http://share.netmodule.com/public/system-software/4.3/4.3.0.107/|4.3.0.107]] |2020-08-31 |2019-10-31|2022-10-31| | |
| 4.1 | LTS |[[http://share.netmodule.com/public/system-software/4.1/4.1.0.111/|4.1.0.111]] |2020-08-31 |2018-02-06|2021-02-06| | |
| |
* 4.4 Branch is extended at least until April 2021, possible a little bit longer | |
==== Deprecated Releases ==== | ==== Deprecated Releases ==== |
| {{tablelayout?rowsHeaderSource=Auto}} |
| ^ Branch ^ State ^ Current Version ^ Current Date ^ First Release ^ End-Of-Support ^ |
^ Branch ^ State ^ Current Version ^ Current Date ^ First Release ^ End-Of-Support ^ | | 4.7 | EOL (STS) | [[http://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | 2023-07-17 | 2022-04-20 | 2023-08-31 | |
| 4.2 | EOL (STS) |[[http://share.netmodule.com/public/system-software/4.2/4.2.0.105/|4.2.0.105]]|2019-07-17 |2018-11-19|2019-07-17| | | 4.5 | EOL (STS) | [[http://share.netmodule.com/public/system-software/4.5/4.5.0.108//|4.5.0.108]] | 2022-01-05 | 2020-12-15 | 2022-03-19 | |
| 4.0 | EOL |[[http://share.netmodule.com/public/system-software/4.0/4.0.0.111/|4.0.0.111]] |2018-11-19 |2016-08-03|2018-11-19| | | 4.4 | EOL (STS) | [[http://share.netmodule.com/public/system-software/4.4/4.4.0.118/|4.4.0.118]] | 2023-03-31 | 2019-10-31 | 2023-03-31 | |
| 3.8 | EOL |[[http://share.netmodule.com/public/system-software/3.8/3.8.0.114/|3.8.0.114]] |2018-11-19 |2015-04-2|2018-11-19| | | 4.3 | EOL (LTS) | [[http://share.netmodule.com/public/system-software/4.3/4.3.0.119/|4.3.0.119]] | 2023-03-31 | 2019-07-02 | 2023-03-31 | |
| | 4.2 | EOL (STS) | [[http://share.netmodule.com/public/system-software/4.2/4.2.0.105/|4.2.0.105]] | 2019-07-17 | 2018-11-19 | 2019-07-17 | |
| | 4.1 | EOL (LTS) | [[http://share.netmodule.com/public/system-software/4.1/4.1.0.113/|4.1.0.113]] | 2021-03-19 | 2018-02-06 | 2021-03-19 | |
| | 4.0 | EOL | [[http://share.netmodule.com/public/system-software/4.0/4.0.0.111/|4.0.0.111]] | 2018-11-19 | 2016-08-03 | 2018-11-19 | |
| | 3.8 | EOL | [[http://share.netmodule.com/public/system-software/3.8/3.8.0.114/|3.8.0.114]] | 2018-11-19 | 2015-04-2 | 2018-11-19 | |
===== Downloads ===== | ===== Downloads ===== |
You find all releases and accompanying release notes on our [[http://share.netmodule.com/public/system-software/ |File server]]. | You find all releases and accompanying release notes on our [[http://share.netmodule.com/public/system-software/ |File server]]. |
* Full release testing | * Full release testing |
* Two release dates per year | * Two release dates per year |
* Major Release (LTS): Long Term Support, End of Support and Repair 3 years after General Availability (GA) | * Major Release (LTS), April: Long Term Support, End of Support and Repair 3 years after General Availability (GA) |
* Major Release (STS): Short Term Support, End of Support and Repair 1 year after General Availability (GA) | * Major Release (STS), October: Short Term Support, End of Support and Repair 1 year after General Availability (GA) |
| |
=== Bugfix & Security Release === | === Bugfix & Security Release === |
[[this>_media/pictures:release_process.png|{{:pictures:release_process.png?600}}]] | [[this>_media/pictures:release_process.png|{{:pictures:release_process.png?600}}]] |
===== Release History ===== | ===== Release History ===== |
| ==== New in Version 4.9 ==== |
| ^ Feature ^ First introduced ^ |
| | **IPv6 Features:** Pv6 Features on LAN side have been implemented as well as IPv6 capabilities for VPN protocols. | [[https://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | |
| | **rc.local is now part saved config:** Customized bash scripts in rc.local can now be backed up and re-uploaded via the user-config.zip. | [[https://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | |
| | **Kernel upgrade:** The NRSW Kernel has been updated to version 5.15.147. | [[https://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | |
| | **GNSS firmware update functionality:** GNSS firmware updates for uBlox NEO-based GNSS receivers integrated. | [[https://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | |
| | **WLAN client can now set custom MAC address:** Analog to ethernet interfaces custom MAC addresses can now be set for WLAN client connections. | [[https://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | |
| | **IPv6 Features:** Pv6 Features on LAN side have been implemented as well as IPv6 capabilities for VPN protocols. | [[https://share.netmodule.com/public/system-software/4.9/4.9.0.100/|4.9.0.100]] | |
| ==== New in Version 4.8 ==== |
| ^ Feature ^ First introduced ^ |
| | **Virtualization:** MAC addresses of ethernet interfaces for LXC containers can now be configured manually. | [[https://share.netmodule.com/public/system-software/4.8/4.8.0.101/|4.8.0.100]] | |
| | **AccessController (AC) WLAN:** For the configuration and management of AP3400 access points. The AC is able to generate AP3400 configurations, push the configuration, and read the current status information of AP3400 devices. The AC can manage up to 15 AP3400 devices. | [[https://share.netmodule.com/public/system-software/4.8/4.8.0.101/|4.8.0.100]] | |
| | **DHCP improvements:** DHCP can now assign static hosts identified by their hostname, previously only MAC-Address and Client ID (labeled as hostname) where supported. | [[https://share.netmodule.com/public/system-software/4.8/4.8.0.101/|4.8.0.100]] | |
| | **ITxPT:** The static multicast routing daemon can now be configured to be available on multiple network interfaces. mDNS requests can now be forwarded to multiple interfaces. | [[https://share.netmodule.com/public/system-software/4.8/4.8.0.101/|4.8.0.100]] | |
| | **NAPT rules:** The maximum number of incoming NAPT rules has been increased to 100.. | [[https://share.netmodule.com/public/system-software/4.8/4.8.0.101/|4.8.0.100]] | |
| ==== New in Version 4.7 ==== |
| ^ Feature ^ First introduced ^ |
| | **IPSec dead peer detection:** A configurable dead peer detection for IKEv2 based tunnels has been added | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **Virtualization, addtional configuration:** MAC addresses of ethernet interfaces for lxc containers can now be configured manually. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **Addtional Firewall feature:** Unencrypted outgoing traffic is now actively rejected during IPSec tunnel downtimes. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **WLAN firmware updates:** Router NG800, NB800, and NB1601 (TI WL18xx-based WLAN module) will use the new WLAN module firmware "8.9.0.0.90". | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **3rd party open source packages updated:** hostapd/wpa-supplicant updated to latest 2.10 version, iw updated to version 5.19, mac80211 updated to version v5.15.58, ath10k-ct updated to version 22 . | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **Addtional DHCP configuration:** DHCP can now assign static hosts identified by their hostname, previously only MAC-Address and Client ID (labeled as hostname) where supported. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **Increased NAPT rules:** The maximum number of incoming NAPT rules has been increased to 100. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **Extended CAN utilities :** The existing can-utility suite has been extended by new commandline tools: canbusload, can-calc-bit-timing, canlogserver, canfdtest, canplayer, cangw and cangen. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.104/|4.7.0.104]] | |
| | **Support for ECC Certificates and Keys:** hostapd/wpa-supplicant updated to latest 2.10 version / iw updated to version 5.19 / mac80211 updated to version v5.15.58 / ath10k-ct updated to version 22. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.102/|4.7.0.102]] | |
| | **SSL certificate generation:** Use random serial numbers for generated SSL certificates. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.102/|4.7.0.102]] | |
| | **IPsec improvements:** ULocal and remote IKE port are now configurable. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.102/|4.7.0.102]] | |
| | **CLI improvements:** The command line interface now shows active DHCP leases in status output.CLI now shows more detailed information on the current WWAN module state. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/|4.7.0.100]] | |
| | **WLAN Pseudo-Bridge:** The WLAN Pseudo-Bridge supports Bridging of WLAN client devices without.| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Wired 802.1X authenticator with optional MAB fallback:** Bridged Ethernet interfaces now support 802.1X as authenticator against external radius server..| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **PoE port settings:** It is now possible to enable or disable PoE per port on NB1810 with PoE support. Also the Ethernet status pages show detailed information on voltage and current drain.| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Change PLMN without global WWAN restart:** Changing the allowed PLMN on one WWAN module triggered a restart of all WWAN connections on all modules. This was changed. An ongoing WWAN connection is not interrupted by PLMN change on another connection.| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **OSPF improvements:** It is now possible to configure an OSPF router ID..| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Support for new WWAN modules:** The NRSW now supports Telit 5G and LTE modules FN980, LE910C4-EU and LN920A12-WW. Router Hardware dependency has to be considered. The web interface status page shows detailed cell information if link aggregation is used by these modules.| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **SDK improvements:** It is now possible to install certificates for the MQTT deamon via SDK and CLI.| [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Support for Docker in LXC:** The LCX container now supports guest systems which run a docker host. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Increase number of Ethernet WAN links:**The maximum number for LAN or VLAN based WAN interfaces was increased to 10. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **BGP improvements:** It is now possible to configure the router ID for BGP. The address family can now be configured to L2VPN EVPN instead of IPv4-unicast. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Random certificate key:** On initial login from factory state a random key is generated to store generated and uploaded key encrypted internally. In the past a dedicated key had to be configured. This is still possible. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **Number of static multicast routes increased:** It is now possible to configure up to 10 static multicast routes. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| | **GUI improvements:** The WWAN configuration via list of known APN does now allow to select IP version for the connection. | [[https://share.netmodule.com/public/system-software/4.7/4.7.0.100/ | 4.7.0.100]] | |
| |
| ==== New in Version 4.6 ==== |
| {{tablelayout?rowsHeaderSource=Auto}} |
| ^ Feature ^ First introduced ^ |
| | **IPSec dead peer detection:** A configurable dead peer detection for IKEv2 based tunnels has been added.| [[https://share.netmodule.com/public/system-software/4.6/4.6.0.106/| 4.6.0.106]] | |
| | **Addtional Firewall feature:** Unencrypted outgoing traffic is now actively rejected during IPSec tunnel downtimes.| [[https://share.netmodule.com/public/system-software/4.6/4.6.0.106/| 4.6.0.106]] | |
| | **OSPF improvements:** It is now possible to configure an OSPF router ID. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.104/| 4.6.0.104]] | |
| | **BGP improvements:** It is now possible to configure the router ID for BGP.\\ The address family can now be configured to L2VPN EVPN instead of IPv4-unicast.. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.104/| 4.6.0.104]] | |
| | **Support for ECC Certificates and Keys:** Elliptic curve cryptography certificates and keys are supported by NRSW now. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.104/| 4.6.0.104]] | |
| | **SSL certificate generation:** Use random serial numbers for generated SSL certificates. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.104/| 4.6.0.104]] | |
| | **IPsec improvements:** ULocal and remote IKE port are now configurable. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.104/| 4.6.0.104]] | |
| | **GUI improvements:** GUI for FW rules was changed to apply with the CI of the rest of the web interface. Message shown after web session timeout was improved. The module’s current firmware is displayed at the firmware update page as additional information. The configuration interface of multicast routing required to set up a source address. This address was technically not mandatory. It is now possible to configure multicast routing without this address. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Opportunistic Wireless Encryption:** It is possible now to use OWE to allow encrypted WLAN in open networks without authentication. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **WLAN EIRP TX power adjustable:** The EIRP can be reduced now. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Firewall address translation based on SRC and DST ports:** It is now possible to filter packets for inbound and outbound address translation by source and destination port. So far it was only possible to use either source or destination port. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Increase maximum number of firewall groups:** It is now possible to configure up to 50 firewall groups. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Maximum number of static routes increased:** It is now possible to configure up to 50 static routes. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Seamless re-keying on IPsec IKEv2:** IKEv2 requires periodic re-keying. The new option "make-before-break" allows to initiate the re-keying while the connection is still up before the keys expire preventing additional connection down time. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **3rd party open source packages updated:** hostapd/wpa-supplicant updated to version 2.10, iw updated to version 5.9, mac80211 updated to version v5.10.16-1, ath10k-ct updated to version 2, The Linux Kernel was updated to version 22, The udev package was updated to version 4.19.163, The OpenSSL library was updated to version 1.1.1l, Quagga was replaced by the actively maintained FRRouting fork in version 7.5.1 on arm based routers. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **SDK improvements:**Scanning for mobile networks disabled all WWAN connections. This was changed: Only connections on the WWAN module selected for the scan are dropped, while connectrtions on other WWAN modules are not affected by the scan. Additional darta is included into Techsupport files to improve maintainability and customer support. This includes logs of start and termination of all SDK jobs, information on jobs which were active at the moment when the Techsupport file was generated and optionally the scripts installed to the system. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **PHP CLI accessible for all users:**It is now possible to enable PHP CLI for any user. Depending on the general access rights the user may read status information or write configuration settings. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **System downgrade to discontinued software releases disabled:** It is not possible any more to downgrade to software versions below 4.3. These software releases are out of support and it is not recommended to use them any more. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Support for password protected PKCS12 files in expert mode:** Expert mode configurations may now contain encrypted PKCS12 files. The passphrase needs to be provided together with the expert mode file. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **Support for Let's Encrypt certificate API:** It is now possible to obtain and renew certificates from Let’s Encrypt automatically. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| | **IPv6 Support:** WAN interfaces and services which connect via WAN do support IPv6 now. | [[https://share.netmodule.com/public/system-software/4.6/4.6.0.100/| 4.6.0.100]] | |
| |
| ==== New in Version 4.5 ==== |
| ^ Feature ^ First introduced ^ |
| | **Firewall address translation based on SRC and DST ports:** It is now possible to filter packets for inbound and outbound address translation by source and destination port. So far it was only possible to use either source or destination port. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.107/ | 4.5.0.107]] | |
| | **GUI improvements:** Message shown after web session timeout was improved. The module current firmware is displayed at the firmware update page as additional information. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.107/ | 4.5.0.107]] | |
| | **System downgrade to discontinued software releases disabled:** It is not possible any more to down-grade to software versions below 4.3. These software releases are out of service and it is not recommended to use them any more. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.107/ | 4.5.0.107]] | |
| | **Increase maximum number of firewall groups:** It is now possible to cunfigure up to 50 firewall groups. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.106/ | 4.5.0.106]] | |
| | **Maximum number of static routes increased:** It is now possible to configure up to 50 static routes. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.106/ | 4.5.0.106]] | |
| | **Seamless re-keying on IPsec IKEv2:** IKEv2 requires periodic re-keying. The new option "make-before-break" allows to initiate the re-keying while the connection is still up before the keys expire preventing additional connection down time. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.106/ | 4.5.0.106]] | |
| | **SDK improvements:** Scanning for mobile networks disabled all WWAN connections. This was changed: Only connections on the WWAN module selected for the scan are dropped, while connectrtions on other WWAN modules are not affected by the scan. Additional darta is included into Techsupport files to improve maintainability and customer support. This includes logs of start and termination of all SDK jobs, information on jobs which were active at the moment when the Techsupport file was generated and optionally the scripts installed to the system.| [[https://share.netmodule.com/public/system-software/4.5/4.5.0.106/ | 4.5.0.106]] | |
| | **GUI improvements:** Soldered eSIM are now constantly shown as eSIM in the web interface. We do not need to detect them dynamically. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.106/ | 4.5.0.106]] | |
| | **Event trigger via PHP-CLI:** It is now possible to trigger a system event via PHP-CLI. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.105/ | 4.5.0.105]] | |
| | **IPSec improvements:** It is now possible to disable Source-NAT rules for IPsec. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.105/ | 4.5.0.105]] | |
| | **GUI improvements:** The GUI now shows better information on the store password option. Also the manual was improved giving better information on this topic. It is possible now to download and upload encrypted configuration files.| [[https://share.netmodule.com/public/system-software/4.5/4.5.0.105/ | 4.5.0.105]] | |
| | **GUI improvements:** IPsec source IP can now be configured. Maximum rate of SMS send events now configurable. Reasonable default values for BGP parameters were added to the web interface. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **STP configuration on NB1601:** The global STP setup can now be overwritten for individual LAN interfaces. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **Enhanced GNSS-DR configurations:** Devices which feature GNSS dead reckoning can now be configured by automatic installation orientation learning. Additionally, the installation location of the device and GNSS antenna in the vehicle (lever arm) can be configured to enhance the precision. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **WLAN WPA3 support:** WPA3-Personal and WPA3-Enterprise are now supported by all NetModule Routers. Remark: TI wl18xx based routers only support WPA3 in client mode. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **New firmware for WL18xxMOD:** The firmware of the WLAN WL18xxMOD module for NB800, NG800 and NB1601 was updated to 8.9.0.0.86. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **WLAN changes:** Wireless-RegDB was updated allowing more bandwith for some WLAN channels in Kazakhstan and higher transmit power for some bands in Ukrainia reflecting changed regulations in these countries. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **SNMP MIB updated:** Some obsolete entries were marked as obsolete and some minor changes were made for better interoperability. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.101/ | 4.5.0.101]] | |
| | **WLAN DFS support:** WLAN channels which require DFS are now supported. DFS support for NG800, NB800, NB1601, NB1800, NB1810, NB2800, NB2810 and NB3800. Therefore additional WLAN channels are now available for selection. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **SDK improvements:** Support for full featured MQTTv5 client. NB800 and NB1601 can now be set to a low power sleep mode from SDK with RTC wakeup. New SDK functions were introduced to scan for probing WLAN clients. The SDK function nb_scan_networks() now contains additional information on the security settings of scanned WLAN networks. nb_transfer functions have a new optional parameter for additional HTTP headers and custom FTP commands. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **VXLAN integrated:** We intruced [[ https://en.wikipedia.org/wiki/Virtual_Extensible_LAN| VXLAN]] as an addtional Layer-2 Tunnel with bridgable VTEP Interfaces | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Reset of WAN-Link statistics via SNMP:** It is now possible to reset the WAN-Link statistics (RX/TX bytes, etc.) via SNMP. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **GUI improvements:** It is now possible to configure whether status messages should appear on the login page of the web interface. The system log level settings can now be changed more convenient in the web interface. The credentials of a configured WLAN access point can now be exported and displayed via a QR code for smart phones. It is now possible to import IPsec expert mode files with encrypted keys via the web interface. The DNS status was shown in the DNS configuration interface. To be compliant with our general approach the DNS status information was moved to a dedicated status page. Routers with Toby-L2 LTE modules provide LTE band information on the WWAN status page. Password input was reworked in the web interface. It is now possible to show passwords in clear text for verification. To configure local keys and certificates it is mandatory to define a password for key encryption. If you did not do that an error message appeared that was not very helpful. The error message was improved. It is possible now to run tcpdump on all interfaces at the same time. This is helpful in situations where you try to debug a misconfiguration in your routing setup where you don’t know on which interface traffic will be routed. Audio tests can now process generic wav-files which can be uploaded via web interface. A warning will alert the user if a WWAN module is running a firmware version which is known to be outdated and should be replaced with a newer one. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Assisted GPS:** Assisted GPS is now supported with u-blox Neo M8 GNSS modules. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **WLAN short guard interval configuration:** The use of short guard interval (SGI) in WLAN access point can be disabled now for NB800 and NB1601. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **WLAN: 8 SSIDs:** It is now possible to configure up to 8 SSIDs in AP-Mode for following routers: NB3800, NB3700 series, NB2800 series, NB2700 series, NB1600. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **New Services available for ITxPT and FMStoIP Feature:** The services ITxPT and FMStoIP are available under two separate service licenses. Please contact sales for any inquiries. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **STP and RSTP for soft-bridges:** BR1 and BR2 support STP and RSTP settings. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Improved user access rights:** The access right management for users was improved. It is now possible to grant native shell access to additional admin users or to disable shell access for a user. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **SD-Card slot of NB1800 and NB1810 now available in NRSW:** The SD-Card slot can now be used as external storage in NRSW. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Additional GRE tunnel parameters:** It is now possible to configure tunnel keys for GRE to allow a gateway to distinguish between GRE packages from different connected end devices. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Update of WLAN drivers and Firmware:** MAC 802.11 stack was updated to version 5.4.27-1. Firmware for ATH10k chipsets was updated to 10.2.4-1.0-00047. Linux iw command was updated to release 5.4. WPA supplicant was updated to release 2.9. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Additional settings for BGP:** The BGP setup now allows to configure additional parameters for time-out, hold-time and weight. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **ETH2 on NB1810 can now be enabled:** NB1810 now allows to disable the SFP port in favor of ETH2 as an additional Ethernet port. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Increase maximum number of static DHCP hosts:** It’s now possible to configure up to 70 static DHCP host entries. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Higher performance for NB1601 (Rev B02) and NB800 (Rev B02):** The maximum CPU clock is increased from 600MHz to 1GHz, improving performance and throughput in several applications. CPU clock is adaptive (lower at high temperature and for low performance applications). | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **NB800 USB can be switched off:** It is now possible to switch off the USB port of NB800. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **eSIM/eUICC support:** We support the remote management of eSIM/eUICC profiles according to SGP.21/.22. The feature requires a software license. Please contact sales for any inquiries. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **SNMP improvements:** The SNMP EngineID is now configurable. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Firmware update for Dual-CAN module:** The CAN controllers of Dual-CAN modules can now be updated via web interface. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Port based DHCP addresses:** NB1601 and NB1800 now support port based DHCP address specification. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **DFS enabled for NB800 and NB1601:** WLAN channels which require DFS are now usable. The required radar detection will be performed automatically if a DFS channel is selected. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Certificate revocation list download for IPsec:** The IPsec daemon now tries to obtain the CRL file if a CRL location is defined in the installed certificate chain. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Wireless regulatory database:** The wireless regulatory database has been updated to its latest version. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Updates of 3rd party open source components:** LXC was updated to version 3.1. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **NG800 supported by NRSW:** The new Automotive Gateway NG800 is now supported by NRSW. The new Automotive Gateway NG800 is now supported by NRSW. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Change build system to OpenEmbedded:** We changed our build system to OpenEmbedded. Along the way we updated nearly all third party libraries and programs including substantial libraries like libc and OpenSSL. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **More VXLAN tunnels:** The maximum number of VXLAN tunnels was increased from 4 to 10. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **WLAN antenna gain:** The WLAN antenna gain can now be increased up to an effective EIRP of 0dB (TX_ADV license required). | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **NB800 and NB1601 WLAN module firmware updated:** TI wl18xx WLAN module firmware was updated to 8.9.0.0.85. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **NTP server answers signed requests with crypto-NAK:** Requests with authentication requests are now answered with crypto-NAK messages according to RFC 5905. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **802.1x over Ethernet:** The routers can now be used in a network with 802.1x infrastructure. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Auto-alignment for GNSS-DR** | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Additional status information on Toby-L2 LTE module:** The signal to noise ratio of the LTE connection is made available via CLI, SDK and web interface. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
| | **Enhanced GNSS-DR configurations:** Devices which feature GNSS dead reckoning can now be configured by automatic installation orientation learning. Additionally, the installation location of device and GNSS antenna in the vehicle (lever arm) can be configured to enhance the precision. | [[https://share.netmodule.com/public/system-software/4.5/4.5.0.100/ | 4.5.0.100]] | |
==== New in Version 4.4 ==== | ==== New in Version 4.4 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **WLAN short guard interval configuration:** The use of short guard interval (SGI) in WLAN access point can be disabled now for NB800 and NB1601. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | | | **Update of WLAN drivers and Firmware:** MAC 802.11 stack was updated to version 5.4.27-1.Firmware for ATH10k chipsets was updated to 10.2.4-1.0-00047.Linux iw command was updated to release 5.4.WPA supplicant was updated to release 2.9. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.117]] | |
| **Firmware update for Dual-CAN module:** The CAN controllers of Dual-CAN modules can now be updated via web interface. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | | | **GUI improvements:** To configure local keys and certificates it is mandatory to define a password for key encryption. Ifyou did not do that an error message appeared that was not very helpful. The error message wasimproved.. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.117]] | |
| **Port based DHCP addresses:** NB1601 and NB1800 now support port based DHCP address specification. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | | | **GUI improvements:** IPsec source IP can now be configured. It is possible now to run tcpdump on all interfaces at the same time. This is helpful in situations where you try to debug a misconfiguration in your routing setup where you don’t know on which interface traffic will be routed. Maximum rate of SMS send events now configurable. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.108/ | 4.4.0.108]] | |
| **Certificate revocation list download for IPsec:** The IPsec daemon now tries to obtain the CRL file if a CRL location is defined in the installed certificate chain. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | | | **WLAN short guard interval configuration:** The use of short guard interval (SGI) in WLAN access point can be disabled now for NB800 and NB1601. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | |
| **Wireless regulatory database:** The wireless regulatory database has been updated to its latest version. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | | | **Firmware update for Dual-CAN module:** The CAN controllers of Dual-CAN modules can now be updated via web interface. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | |
| **GUI improvements:** It is now possible to configure whether status messages should appear on the login page of the web interface. The system log level settings can now be changed more convenient in the web interface. It is now possible to import IPsec expert mode files with encrypted keys via the web interface. Routers with Toby-L2 LTE modules now show LTE band information on the WWAN status page. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **Port based DHCP addresses:** NB1601 and NB1800 now support port based DHCP address specification. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | |
| **SDK improvements:** NB800 and NB1601 can now be set to a low power sleep mode from SDK. New SDK functions were introduced to scan for probing WLAN clients. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **Certificate revocation list download for IPsec:** The IPsec daemon now tries to obtain the CRL file if a CRL location is defined in the installed certificate chain. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | |
| **WLAN: 8 SSIDs:** It is now possible to configure up to 8 SSIDs in AP-Mode for following routers: NB3800, NB3700 series, NB2800 series, NB2700 series, NB1600. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **Wireless regulatory database:** The wireless regulatory database has been updated to its latest version. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.105/ | 4.4.0.105]] | |
| **New Services available for ITxPT and FMStoIP Feature:** The services ITxPT and FMStoIP are available under two separate service licenses. Please contact sales for any inquiries. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **GUI improvements:** It is now possible to configure whether status messages should appear on the login page of the web interface. The system log level settings can now be changed more convenient in the web interface. It is now possible to import IPsec expert mode files with encrypted keys via the web interface. Routers with Toby-L2 LTE modules now show LTE band information on the WWAN status page. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **STP and RSTP for soft-bridges:** BR1 and BR2 support STP and RSTP settings. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **SDK improvements:** NB800 and NB1601 can now be set to a low power sleep mode from SDK. New SDK functions were introduced to scan for probing WLAN clients. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **Improved user access rights:** The access right management for users was improved. It is now possible to grant native shell access to additional admin users or to disable shell access for a user. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **WLAN: 8 SSIDs:** It is now possible to configure up to 8 SSIDs in AP-Mode for following routers: NB3800, NB3700 series, NB2800 series, NB2700 series, NB1600. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **New Services available for ITxPT and FMStoIP Feature:** The services ITxPT and FMStoIP are available under two separate service licenses. Please contact sales for any inquiries. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **Additional GRE tunnel parameters:** It is now possible to configure tunnel keys for GRE to allow a gateway to distinguish between GRE packages from different connected end devices. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **STP and RSTP for soft-bridges:** BR1 and BR2 support STP and RSTP settings. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **Additional settings for BGP:** The BGP setup now allows to configure additional parameters for time-out, hold-time and weight. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **Improved user access rights:** The access right management for users was improved. It is now possible to grant native shell access to additional admin users or to disable shell access for a user. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **ETH2 on NB1810 can now be enabled:** NB1810 now allows to disable the SFP port in favor of ETH2 as an additional Ethernet port. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **Increase maximum number of static DHCP hosts:** It’s now possible to configure up to 70 static DHCP host entries. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | | | **Additional GRE tunnel parameters:** It is now possible to configure tunnel keys for GRE to allow a gateway to distinguish between GRE packages from different connected end devices. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **QoS with bridged WLAN interfaces:** QoS settings were not possible for WLAN access point mode if the WLAN interface was bridged. That has been changed. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **Additional settings for BGP:** The BGP setup now allows to configure additional parameters for time-out, hold-time and weight. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **IPsec improvements:** IPsec tunnels can be enabled and disabled individually now. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **ETH2 on NB1810 can now be enabled:** NB1810 now allows to disable the SFP port in favor of ETH2 as an additional Ethernet port. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **Support for new router model NB2810:** Added software support for the new NB2810 router. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **Increase maximum number of static DHCP hosts:** It’s now possible to configure up to 70 static DHCP host entries. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.104/ | 4.4.0.104]] | |
| **GUI improvements:** Mark WLAN 5 GHz indoor channels as indoor. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **QoS with bridged WLAN interfaces:** QoS settings were not possible for WLAN access point mode if the WLAN interface was bridged. That has been changed. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases.. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **IPsec improvements:** IPsec tunnels can be enabled and disabled individually now. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| **IPsec:** The number of configurable IPsec tunnels was increased to 10. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **Support for new router model NB2810:** Added software support for the new NB2810 router. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| **New NetModule CI** | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **GUI improvements:** Mark WLAN 5 GHz indoor channels as indoor. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| **Added support for passive CAN interfaces on NB800 and NB1601:** There is a new hardware extension providing passive CAN interfaces for NB800 and NB1601. These interfaces are supported now. Passive interfaces are designed so that they can only be used for listening on the CAN bus, while the software is unable to send anything on the bus. Also enabling termination resistors for the bus by software is not possible on the passive interfaces. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases.. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[ftp://share.netmodule.com/router/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | | | **IPsec:** The number of configurable IPsec tunnels was increased to 10. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| | **New NetModule CI** | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| | **Added support for passive CAN interfaces on NB800 and NB1601:** There is a new hardware extension providing passive CAN interfaces for NB800 and NB1601. These interfaces are supported now. Passive interfaces are designed so that they can only be used for listening on the CAN bus, while the software is unable to send anything on the bus. Also enabling termination resistors for the bus by software is not possible on the passive interfaces. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
| | **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[https://share.netmodule.com/public/system-software/4.4/4.4.0.103/ | 4.4.0.103]] | |
==== New in Version 4.3 ==== | ==== New in Version 4.3 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **Firmware update for Dual-CAN module:** The CAN controllers of Dual-CAN modules can now be updated via web interface. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.107/ | 4.3.0.107]] | | | **GUI improvements:** To configure local keys and certificates it is mandatory to define a password for key encryption. Ifyou did not do that an error message appeared that was not very helpful. The error message wasimproved. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.107/ | 4.3.0.117]] | |
| **Increase maximum number of static DHCP hosts:** It’s now possible to configure up to 70 static DHCP host entries. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | | | **Firmware update for Dual-CAN module:** The CAN controllers of Dual-CAN modules can now be updated via web interface. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.107/ | 4.3.0.107]] | |
| **ETH2 on NB1810 can now be enabled:** NB1810 now allows to disable the SFP port in favor of ETH2 as an additional Ethernet port. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | | | **Increase maximum number of static DHCP hosts:** It’s now possible to configure up to 70 static DHCP host entries. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | |
| **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | | | **ETH2 on NB1810 can now be enabled:** NB1810 now allows to disable the SFP port in favor of ETH2 as an additional Ethernet port. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | |
| **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | | | **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | |
| **Support for new router model NB2810:** Added software support for the new NB2810 router. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | | | **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.106/ | 4.3.0.106]] | |
| **GUI improvements:** Mark WLAN 5 GHz indoor channels as indoor. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | | | **Support for new router model NB2810:** Added software support for the new NB2810 router. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | |
| **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | | | **GUI improvements:** Mark WLAN 5 GHz indoor channels as indoor. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | |
| **New NetModule CI** | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | | | **Prevent down-grade to incompatible version:** If you want to downgrade to an older release, you may have to install intermediate releases. Normally that’s the latest release of the major version of the desired software. The Update process will detect the release number of the uploaded image and prevent installation of invalid releases. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | |
| **Added support for passive CAN interfaces on NB800 and NB1601:** There is a new hardware extension providing passive CAN interfaces for NB800 and NB1601. These interfaces are supported now. Passive interfaces are designed so that they can only be used for listening on the CAN bus, while the software is unable to send anything on the bus. Also enabling termination resistors for the bus by software is not possible on the passive interfaces. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | | | **New NetModule CI** | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | |
| **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | | | **Added support for passive CAN interfaces on NB800 and NB1601:** There is a new hardware extension providing passive CAN interfaces for NB800 and NB1601. These interfaces are supported now. Passive interfaces are designed so that they can only be used for listening on the CAN bus, while the software is unable to send anything on the bus. Also enabling termination resistors for the bus by software is not possible on the passive interfaces. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | |
| **SDK improvements:** New function usleep() provides sub second sleep intervals. New API function to nb_syslog_p() for logging to different log levels. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | | | **Active GNSS antenna for NB1800 and NB1810:** New HW releases of NB1800 and NB1810 support active GNSS antenna. It can be configured via GNSS settings now. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.105/ | 4.3.0.105]] | |
| **SNMP service improvements:** System temperature is now provided on SNMP poll. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | | | **SDK improvements:** New function usleep() provides sub second sleep intervals. New API function to nb_syslog_p() for logging to different log levels. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | |
| **Added support for certificate chains for OpenVPN export mode configuration:** It is possible now to install certificate chains for OpenVPN using the expert mode configuration process. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | | | **SNMP service improvements:** System temperature is now provided on SNMP poll. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | |
| **Netflow interface supervision for Ethernet and WWAN interfaces:** Netflow was introduced for WLAN interfaces and is now available for other device types like Ethernet and WWAN as well. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | | | **Added support for certificate chains for OpenVPN export mode configuration:** It is possible now to install certificate chains for OpenVPN using the expert mode configuration process. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | |
| **Key-parameter support for GRE tunnels:** GRE tunnels now support the Key-parameter which is used to separate different GRE tunnels between two end-points. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | | | **Netflow interface supervision for Ethernet and WWAN interfaces:** Netflow was introduced for WLAN interfaces and is now available for other device types like Ethernet and WWAN as well. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | |
| **CLI improvements:** Time stamp of last reset of data counter will be displayed on cli status. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.101/ | 4.3.0.101]] | | | **Key-parameter support for GRE tunnels:** GRE tunnels now support the Key-parameter which is used to separate different GRE tunnels between two end-points. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.104/ | 4.3.0.104]] | |
| **Fix time stamp in NMEA stream:** Some GNSS chipsets are known to provide an invalid date in November 2019 due to the GPS-rollover issue. Time stamps in NMEA frames will be altered to fix this issue for all chipsets. This functionality can be disable. Please contact our support if you need unmodified data. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.101/ | 4.3.0.101]] | | | **CLI improvements:** Time stamp of last reset of data counter will be displayed on cli status. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.101/ | 4.3.0.101]] | |
| **WLAN fast roaming:** Fast Transition (802.11r) and pre-authentication is now supported. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Fix time stamp in NMEA stream:** Some GNSS chipsets are known to provide an invalid date in November 2019 due to the GPS-rollover issue. Time stamps in NMEA frames will be altered to fix this issue for all chipsets. This functionality can be disable. Please contact our support if you need unmodified data. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.101/ | 4.3.0.101]] | |
| **WLAN band steering:** It is now possible to steer WLAN clients from one frequency band to another. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **WLAN fast roaming:** Fast Transition (802.11r) and pre-authentication is now supported. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **L2TPv3 support:** L2TPv3 tunnels can be configured and bridged to local interfaces. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **WLAN band steering:** It is now possible to steer WLAN clients from one frequency band to another. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **Update of 3rd party software packages:** Linux Kernel was updated to LTS release 4.19. curl was updated to version 7.64.0. OpenSSL was updated to 1.0.2r. OpenVPN was updated to 2.4.6. Busybox was updated to 1.28.4 | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **L2TPv3 support:** L2TPv3 tunnels can be configured and bridged to local interfaces. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **Allow multiple VRRP instances:** You can now setup up to 4 instances of VRRP for different networks. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Update of 3rd party software packages:** Linux Kernel was updated to LTS release 4.19. curl was updated to version 7.64.0. OpenSSL was updated to 1.0.2r. OpenVPN was updated to 2.4.6. Busybox was updated to 1.28.4 | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **Disable low data rates as WLAN access point:** It is now possible to disable low data rates in WLAN 2.4 GHz frequency band to avoid sticky clients and decrease airtime utilization. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Allow multiple VRRP instances:** You can now setup up to 4 instances of VRRP for different networks. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **Improved voice call quality:** On NB1601 the voice quality was improved by better software sound processing. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Disable low data rates as WLAN access point:** It is now possible to disable low data rates in WLAN 2.4 GHz frequency band to avoid sticky clients and decrease airtime utilization. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **Support for new hardware:** The CanGI shield providing a GNSS receiver and a CAN interface is now supported for NB800. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Improved voice call quality:** On NB1601 the voice quality was improved by better software sound processing. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **Wireless regulatory:** The wireless regulatory database has been updated to version 2019-04-23. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Support for new hardware:** The CanGI shield providing a GNSS receiver and a CAN interface is now supported for NB800. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| **DIO Support:** Support of new DIO Extension Module for NB2800 and NB3800. | [[ftp://share.netmodule.com/router/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | | | **Wireless regulatory:** The wireless regulatory database has been updated to version 2019-04-23. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| | **DIO Support:** Support of new DIO Extension Module for NB2800 and NB3800. | [[https://share.netmodule.com/public/system-software/4.3/4.3.0.100/ | 4.3.0.100]] | |
| |
==== New in Version 4.2 ==== | ==== New in Version 4.2 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **Improved voice call quality:** On NB1601 the voice quality was improved by better software sound processing. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.105/ | 4.2.0.105]] | | | **Improved voice call quality:** On NB1601 the voice quality was improved by better software sound processing. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.105/ | 4.2.0.105]] | |
| **GNSS epoch rollover:** Several GNSS modules from different vendors will face an unsigned integer overrun in November 2019. This will result in a time offset of about 20 years. Our system software will handle this issue. No action is needed (apart from updating to latest NRSW software) as long as your application does not derive time stamps directly from the GNSS NMEA stream. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **GNSS epoch rollover:** Several GNSS modules from different vendors will face an unsigned integer overrun in November 2019. This will result in a time offset of about 20 years. Our system software will handle this issue. No action is needed (apart from updating to latest NRSW software) as long as your application does not derive time stamps directly from the GNSS NMEA stream. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **More status information on SWI interface for QMI based WWAN modules:** The WWAN status information was extended to show information on SWI status. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **More status information on SWI interface for QMI based WWAN modules:** The WWAN status information was extended to show information on SWI status. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **IPSec now supports certificate chains:** You can now upload certificate chains for IPSec connection establishment. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **IPSec now supports certificate chains:** You can now upload certificate chains for IPSec connection establishment. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **Updated link to latest software:** The default link for automated software updates was pointing to wrong location. That was fixed. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **Updated link to latest software:** The default link for automated software updates was pointing to wrong location. That was fixed. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **U-blox Toby L2 Series:** The u-blox Toby-L200 and Toby-L201 are now supported by NRSW. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **U-blox Toby L2 Series:** The u-blox Toby-L200 and Toby-L201 are now supported by NRSW. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **Provide system time to NB1601 GNSS module on boot:** To acquire faster GNSS 1x we initialize the internal clock of the GNSS module with the system time. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **Provide system time to NB1601 GNSS module on boot:** To acquire faster GNSS 1x we initialize the internal clock of the GNSS module with the system time. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **Watchdog supervision of OSPF and BGP daemon:** OSPF and BGP daemon are now supervised by watchdog. This will result in a reboot and reinitialization of the router if one of these daemons crashes. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **Watchdog supervision of OSPF and BGP daemon:** OSPF and BGP daemon are now supervised by watchdog. This will result in a reboot and reinitialization of the router if one of these daemons crashes. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **APN credentials printed to logs:** With debug set to maximum the login credentials for the WWAN APN were printed to the logs. In most setups there is no secret data in APN credentials as they are common for all customers of one provider and can be looked up on the Internet, but if you use a private APN they should not show up in the logs. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **APN credentials printed to logs:** With debug set to maximum the login credentials for the WWAN APN were printed to the logs. In most setups there is no secret data in APN credentials as they are common for all customers of one provider and can be looked up on the Internet, but if you use a private APN they should not show up in the logs. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **Assisted GPS:** Assisted GPS is now supported with u-blox Neo M8 GNSS modules. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | | | **Assisted GPS:** Assisted GPS is now supported with u-blox Neo M8 GNSS modules. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.104/ | 4.2.0.104]] | |
| **Voice signaling:** Voice signaling is now possible without any Voice license on voice capable hardware. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Voice signaling:** Voice signaling is now possible without any Voice license on voice capable hardware. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **SW update package validated before upload:** An invalid SW update package is identified in the web interface before the actual transfer to the target was performed skipping the process of slow up-load of potential invalid packages via mobile network. The new architecture also allows us to provide better and more detailed feedback on the current status of the update. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **SW update package validated before upload:** An invalid SW update package is identified in the web interface before the actual transfer to the target was performed skipping the process of slow up-load of potential invalid packages via mobile network. The new architecture also allows us to provide better and more detailed feedback on the current status of the update. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **New version of igmpproxy:** Igmpproxy was updated to version 0.2.1. This also fixes a bug on interfaces with an alias IP setup. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **New version of igmpproxy:** Igmpproxy was updated to version 0.2.1. This also fixes a bug on interfaces with an alias IP setup. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Several changes to the WLAN settings to comply with RED (2014/53/EU). | | **Several changes to the WLAN settings to comply with RED (2014/53/EU). |
** | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | ** | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **WLAN advanced user license:** To set up regulatory domain and antenna gain parameter it is required to have a WLAN advanced user license. The new default parameters are "EU" for the regulatory domain and "3 dBi" for the antenna gain. Please contact our customer support if you need this a WLAN advanced user license | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **WLAN advanced user license:** To set up regulatory domain and antenna gain parameter it is required to have a WLAN advanced user license. The new default parameters are "EU" for the regulatory domain and "3 dBi" for the antenna gain. Please contact our customer support if you need this a WLAN advanced user license | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **HTTPS access with client certificates:** Functions which communicate with HTTPS-Servers (like SW update from URL or SDK) can now authenticate with client-certificate and key. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **HTTPS access with client certificates:** Functions which communicate with HTTPS-Servers (like SW update from URL or SDK) can now authenticate with client-certificate and key. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **MQTT publishing from SDK:** Functions for publishing MQTT messages were added to the SDK scripting language. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **MQTT publishing from SDK:** Functions for publishing MQTT messages were added to the SDK scripting language. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Password hashes replace encrypted passwords in configuration:** We changed our password handling to use cryptographic hashes instead of symmetric encrypted passwords where ever possible. Therefor you have to provide the administrator password on downgrade to older SW releases as these still rely on the passwords to be stored on the device. For SNMP access the passwords still need to be available. Therefor users which shall be able to log in via SNMP need the new setting "Store password in device" to be enabled. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Password hashes replace encrypted passwords in configuration:** We changed our password handling to use cryptographic hashes instead of symmetric encrypted passwords where ever possible. Therefor you have to provide the administrator password on downgrade to older SW releases as these still rely on the passwords to be stored on the device. For SNMP access the passwords still need to be available. Therefor users which shall be able to log in via SNMP need the new setting "Store password in device" to be enabled. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **GNSS default antenna type set to "active":** As passive GNSS antennas are very uncommon these days we changed the default setting to active. This is only valid on factory default configuration. A configuration update will keep the existing settings. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **GNSS default antenna type set to "active":** As passive GNSS antennas are very uncommon these days we changed the default setting to active. This is only valid on factory default configuration. A configuration update will keep the existing settings. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Support for new NB1601:** The new NB1601 router is supported first time by 4.2.0.100. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Support for new NB1601:** The new NB1601 router is supported first time by 4.2.0.100. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Wait for configuration change task to be finished:** Changing a configuration setting via CLI or SDK does not block. A new function was implemented to request if all pending tasks have been finished and it is safe to send new configuration change requests.| [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Wait for configuration change task to be finished:** Changing a configuration setting via CLI or SDK does not block. A new function was implemented to request if all pending tasks have been finished and it is safe to send new configuration change requests.| [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **WLAN MESH:** The support of WLAN Mesh (802.11s) is now available. It is possible to configure a pure mesh point or a mesh access point (mesh point and access point). Currently the encrypted Mesh with TI based Router (NB800, NB1601) is only compatible among themselves.| [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **WLAN MESH:** The support of WLAN Mesh (802.11s) is now available. It is possible to configure a pure mesh point or a mesh access point (mesh point and access point). Currently the encrypted Mesh with TI based Router (NB800, NB1601) is only compatible among themselves.| [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules.| [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules.| [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported.| [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported.| [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **WLAN Inter Access Point Protocol (IAPP):** It is now possible to enable IAPP within the WLAN configuration. This feature will inform the old access point that a WLAN client has associated with a new access point.| [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **WLAN Inter Access Point Protocol (IAPP):** It is now possible to enable IAPP within the WLAN configuration. This feature will inform the old access point that a WLAN client has associated with a new access point.| [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Number of VLANs increased:** It is now possible to configure up to 10 VLANs instead of 5. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Number of VLANs increased:** It is now possible to configure up to 10 VLANs instead of 5. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Update of time zone data:** North Korea switched back to +09 on 2018-05-05. Our best wishes to all Korean people. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Update of time zone data:** North Korea switched back to +09 on 2018-05-05. Our best wishes to all Korean people. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **CLI shows WLAN channel:** The cli status command will show the current WLAN channel if access point or dual mode is configured. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **CLI shows WLAN channel:** The cli status command will show the current WLAN channel if access point or dual mode is configured. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **LED configuration:** All LEDs except for "STAT" can be configured to different function like LAN, WAN, WLAN, WWAN, etc. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **LED configuration:** All LEDs except for "STAT" can be configured to different function like LAN, WAN, WLAN, WWAN, etc. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Bridges without STP:** It is possible now to switch off STP completely on bridg-devices. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Bridges without STP:** It is possible now to switch off STP completely on bridg-devices. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **GUI improvements:** Allow Upload of keys and certificates in nested p12 files. IP pass-trough setup failed on web interface with recent SW releases. Obsolete GUI interfaces have been removed. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **GUI improvements:** Allow Upload of keys and certificates in nested p12 files. IP pass-trough setup failed on web interface with recent SW releases. Obsolete GUI interfaces have been removed. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **React faster on GNSS flaps:** The maximum GNSS flaps were evaluated only once every 5 minutes. This has been changed. Now the GNSS supervision will take action as soon as the maximum flaps have been detected. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **React faster on GNSS flaps:** The maximum GNSS flaps were evaluated only once every 5 minutes. This has been changed. Now the GNSS supervision will take action as soon as the maximum flaps have been detected. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **NB2800 with Push-To-Talk module:** Added support for new Push-To-Talk module on NB2800. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **NB2800 with Push-To-Talk module:** Added support for new Push-To-Talk module on NB2800. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Configuration of NTP server stratum:** The stratum of NTP server in case of GNSS sync or time from internal clock can be configured now. As these sources are not very accurate this feature should be used with care. Please contact our customer support for detailed information. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Configuration of NTP server stratum:** The stratum of NTP server in case of GNSS sync or time from internal clock can be configured now. As these sources are not very accurate this feature should be used with care. Please contact our customer support for detailed information. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Refactory of config converter:** Our config conversion tool cfconvert which is responsible for converting older and newer configuration files to the configuration release needed by the current version was refactored speeding up this step of SW update or configuration apply by factor or 3-5 and reducing the required flash space by several hundred kB which was required for implementation of other features on older hardware like NB1600 or NB2700 with very limited flash space. As a side effect the conversion to configuration versions other than the one used by the current SW release is not supported any more. In normal operation this is not needed anyway. If you have such a requirement please contact our technical support. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Refactory of config converter:** Our config conversion tool cfconvert which is responsible for converting older and newer configuration files to the configuration release needed by the current version was refactored speeding up this step of SW update or configuration apply by factor or 3-5 and reducing the required flash space by several hundred kB which was required for implementation of other features on older hardware like NB1600 or NB2700 with very limited flash space. As a side effect the conversion to configuration versions other than the one used by the current SW release is not supported any more. In normal operation this is not needed anyway. If you have such a requirement please contact our technical support. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Recover from power fail on Sierra Wireless MC7430 and MC7455 firmware update:** We have seen LTE modules MC7430 and MC7455 to enter error state if a power fail occurred while FW update was in progress. Counter measurements have been taken to retry a failed update and finally trying roll back to latest working version in case of reoccurring update failures. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Recover from power fail on Sierra Wireless MC7430 and MC7455 firmware update:** We have seen LTE modules MC7430 and MC7455 to enter error state if a power fail occurred while FW update was in progress. Counter measurements have been taken to retry a failed update and finally trying roll back to latest working version in case of reoccurring update failures. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Power down Sierra Wireless LTE modules on ignition sense power cycle:** If we power down NB2800 due to ignition sense routers with MC7430 and MC7455 will hold module power up for an additional time out. This will increase the power down time, but is suggested as good practice by the module manufacturer. | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Power down Sierra Wireless LTE modules on ignition sense power cycle:** If we power down NB2800 due to ignition sense routers with MC7430 and MC7455 will hold module power up for an additional time out. This will increase the power down time, but is suggested as good practice by the module manufacturer. | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
| **Navigation mode of ublox GNSS modules:** The operational mode of ublox GNSS modules is now automatically set up portable or stationary depending on the router setting admin.area (mobile or stationary). | [[ftp://share.netmodule.com/router/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | | | **Navigation mode of ublox GNSS modules:** The operational mode of ublox GNSS modules is now automatically set up portable or stationary depending on the router setting admin.area (mobile or stationary). | [[https://share.netmodule.com/public/system-software/4.2/4.2.0.100/ | 4.2.0.100]] | |
==== New in Version 4.1 ==== | ==== New in Version 4.1 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **Fix time stamp in NMEA stream:** Some GNSS chipsets are known to provide an invalid date in November 2019 due to the GPS-rollover issue. Time stamps in NMEA frames will be altered to fix this issue for all chipsets. This functionality can be disable. Please contact our support if you need unmodified data. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.109/ | 4.1.0.109]] | | | **Fix time stamp in NMEA stream:** Some GNSS chipsets are known to provide an invalid date in November 2019 due to the GPS-rollover issue. Time stamps in NMEA frames will be altered to fix this issue for all chipsets. This functionality can be disable. Please contact our support if you need unmodified data. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.109/ | 4.1.0.109]] | |
| **SDK improvements:** New API function to nb_syslog_p() for logging to different log levels. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.108/ | 4.1.0.108]] | | | **SDK improvements:** New API function to nb_syslog_p() for logging to different log levels. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.108/ | 4.1.0.108]] | |
| **GNSS epoch rollover:** Several GNSS modules from different vendors will face an unsigned integer overrun in November 2019. This will result in a time offset of about 20 years. Our system software will handle this issue. No action is needed (apart from updating to latest NRSW software) as long as your application does not derive time stamps directly from the GNSS NMEA stream. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **GNSS epoch rollover:** Several GNSS modules from different vendors will face an unsigned integer overrun in November 2019. This will result in a time offset of about 20 years. Our system software will handle this issue. No action is needed (apart from updating to latest NRSW software) as long as your application does not derive time stamps directly from the GNSS NMEA stream. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **More status information on SWI interface for QMI based WWAN modules:** The WWAN status information was extended to show information on SWI status. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **More status information on SWI interface for QMI based WWAN modules:** The WWAN status information was extended to show information on SWI status. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **IPSec now supports certi1cate chains:** You can now upload certi1cate chains for IPSec connection establishment. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **IPSec now supports certi1cate chains:** You can now upload certi1cate chains for IPSec connection establishment. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **Updated link to latest software:** The default link for automated software updates was pointing to wrong location. That was fixed. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **Updated link to latest software:** The default link for automated software updates was pointing to wrong location. That was fixed. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **U-blox Toby L2 Series:** The u-blox Toby-L200 and Toby-L201 are now supported by NRSW. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **U-blox Toby L2 Series:** The u-blox Toby-L200 and Toby-L201 are now supported by NRSW. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **Watchdog supervision of OSPF and BGP daemon:** OSPF and BGP daemon are now supervised by watchdog. This will result in a reboot and reinitialization of the router if one of these daemons crashes. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **Watchdog supervision of OSPF and BGP daemon:** OSPF and BGP daemon are now supervised by watchdog. This will result in a reboot and reinitialization of the router if one of these daemons crashes. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **APN credentials printed to logs:** With debug set to maximum the login credentials for the WWAN APN were printed to the logs. In most setups there is no secret data in APN credentials as they are common for all customers of one provider and can be looked up on the Internet, but if you use a private APN they should not show up in the logs. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | | | **APN credentials printed to logs:** With debug set to maximum the login credentials for the WWAN APN were printed to the logs. In most setups there is no secret data in APN credentials as they are common for all customers of one provider and can be looked up on the Internet, but if you use a private APN they should not show up in the logs. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.105/ | 4.1.0.105]] | |
| **Voice signaling:** Voice signaling is now possible without any Voice license on voice capable hardware. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Voice signaling:** Voice signaling is now possible without any Voice license on voice capable hardware. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **MQTT publishing from SDK:** Functions for publishing MQTT messages were added to the SDK scripting language. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **MQTT publishing from SDK:** Functions for publishing MQTT messages were added to the SDK scripting language. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Wait for configuration change task to be finished:** Changing a configuration setting via CLI or SDK does not block. A new function was implemented to request if all pending tasks have been finished and it is safe to send new configuration change requests. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Wait for configuration change task to be finished:** Changing a configuration setting via CLI or SDK does not block. A new function was implemented to request if all pending tasks have been finished and it is safe to send new configuration change requests. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Number of VLANs increased:** It is now possible to configure up to 10 VLANs instead of 5. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Number of VLANs increased:** It is now possible to configure up to 10 VLANs instead of 5. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Update of time zone data:** North Korea switched back to +09 on 2018-05-05. Our best wishes to all Korean people. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Update of time zone data:** North Korea switched back to +09 on 2018-05-05. Our best wishes to all Korean people. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Bridges without STP:** It is possible now to switch off STP completely on bridg-devices. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Bridges without STP:** It is possible now to switch off STP completely on bridg-devices. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **GUI improvements:** Allow Upload of keys and certificates in nested p12 files. IP pass-trough setup failed on web interface with recent SW releases. Obsolete GUI interfaces have been removed. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **GUI improvements:** Allow Upload of keys and certificates in nested p12 files. IP pass-trough setup failed on web interface with recent SW releases. Obsolete GUI interfaces have been removed. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **React faster on GNSS flaps:** The maximum GNSS flaps were evaluated only once every 5 minutes. This has been changed. Now the GNSS supervision will take action as soon as the maximum flaps have been detected. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **React faster on GNSS flaps:** The maximum GNSS flaps were evaluated only once every 5 minutes. This has been changed. Now the GNSS supervision will take action as soon as the maximum flaps have been detected. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Configuration of NTP server stratum:** The stratum of NTP server in case of GNSS sync or time from internal clock can be configured now. As these sources are not very accurate this feature should be used with care. Please contact our customer support for detailed information. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Configuration of NTP server stratum:** The stratum of NTP server in case of GNSS sync or time from internal clock can be configured now. As these sources are not very accurate this feature should be used with care. Please contact our customer support for detailed information. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Recover from power fail on Sierra Wireless MC7430 and MC7455 firmware update:** We have seen LTE modules MC7430 and MC7455 to enter error state if a power fail occurred while FW update was in progress. Counter measurements have been taken to retry a failed update and finally trying roll back to latest working version in case of reoccurring update failures. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Recover from power fail on Sierra Wireless MC7430 and MC7455 firmware update:** We have seen LTE modules MC7430 and MC7455 to enter error state if a power fail occurred while FW update was in progress. Counter measurements have been taken to retry a failed update and finally trying roll back to latest working version in case of reoccurring update failures. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Recover from power fail on Sierra Wireless MC7430 and MC7455 firmware update:** We have seen LTE modules MC7430 and MC7455 to enter error state if a power fail occurred while FW update was in progress. Counter measurements have been taken to retry a failed update and finally trying roll back to latest working version in case of reoccurring update failures. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Recover from power fail on Sierra Wireless MC7430 and MC7455 firmware update:** We have seen LTE modules MC7430 and MC7455 to enter error state if a power fail occurred while FW update was in progress. Counter measurements have been taken to retry a failed update and finally trying roll back to latest working version in case of reoccurring update failures. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Power down Sierra Wireless LTE modules on ignition sense power cycle:** If we power down NB2800 due to ignition sense routers with MC7430 and MC7455 will hold module power up for an additional time out. This will increase the power down time, but is suggested as good practice by the module manufacturer. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Power down Sierra Wireless LTE modules on ignition sense power cycle:** If we power down NB2800 due to ignition sense routers with MC7430 and MC7455 will hold module power up for an additional time out. This will increase the power down time, but is suggested as good practice by the module manufacturer. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Conversion of configuration version 1.12:** Configuration files of version 1.12 can be imported or converted on down grade from newest SW release. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | | | **Conversion of configuration version 1.12:** Configuration files of version 1.12 can be imported or converted on down grade from newest SW release. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.103/ | 4.1.0.103]] | |
| **Support for new eMMC chipsets:** Due to an EOL notice we changed the eMMC chipset of NB2800. Support for this chipset was implemented. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Support for new eMMC chipsets:** Due to an EOL notice we changed the eMMC chipset of NB2800. Support for this chipset was implemented. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **OpenVPN pushed IP address:** It is possible to apply the network settings pushed by OpenVPN server for a TAP device. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **OpenVPN pushed IP address:** It is possible to apply the network settings pushed by OpenVPN server for a TAP device. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Consider only 3G/4G networks for WWAN data link:** It is possible to restrict a WWAN interface to connect only on 3G or 4G networks. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Consider only 3G/4G networks for WWAN data link:** It is possible to restrict a WWAN interface to connect only on 3G or 4G networks. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Provide same USB drivers for all platforms:** For our products different drivers for external USB serial or USB ethernet adapters had been shipped. We now provide the same drivers for all our routers. Please refer to our manual for detailed description of supported 3rd party hardware. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Provide same USB drivers for all platforms:** For our products different drivers for external USB serial or USB ethernet adapters had been shipped. We now provide the same drivers for all our routers. Please refer to our manual for detailed description of supported 3rd party hardware. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **GUI improvements:** A change of the IP of the WLAN AP in dual-mode operation did not automatically change the DHCP range appropriately. A SIM card which required a PIN did show "unknown" for pin protection in overview and "error" on SIM state until the correct PIN was applied. It is now possible to install LXC containers directly from the web interface on devices with virtualisation support. The web GUI does not offer HW flow control on internal serial ports which do not support this. The current IPsec status shown in the web interface was inconsistent at different locations. The status is shown identical everywhere now. A WAN interface on a disabled LAN port would show as "dialing" in the overview. That was fixed. It shows "disabled" now. On too many VLAN interfaces the GUI showed inconsistent data. WLAN networks which do not match on channel selection in WLAN dual mode are not selectable any more in the web GUI. The uptime of OpenVPN clients is shown in UTC in the web interface. That is explicitly mentioned now. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **GUI improvements:** A change of the IP of the WLAN AP in dual-mode operation did not automatically change the DHCP range appropriately. A SIM card which required a PIN did show "unknown" for pin protection in overview and "error" on SIM state until the correct PIN was applied. It is now possible to install LXC containers directly from the web interface on devices with virtualisation support. The web GUI does not offer HW flow control on internal serial ports which do not support this. The current IPsec status shown in the web interface was inconsistent at different locations. The status is shown identical everywhere now. A WAN interface on a disabled LAN port would show as "dialing" in the overview. That was fixed. It shows "disabled" now. On too many VLAN interfaces the GUI showed inconsistent data. WLAN networks which do not match on channel selection in WLAN dual mode are not selectable any more in the web GUI. The uptime of OpenVPN clients is shown in UTC in the web interface. That is explicitly mentioned now. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **GPS required fix accuracy default value changed to 50m:** The required accuracy for a GPS fix was changed from 15m to 50m. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **GPS required fix accuracy default value changed to 50m:** The required accuracy for a GPS fix was changed from 15m to 50m. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Better help text on CLI:** The help text for CLI was missing a parameter on firmware update. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Better help text on CLI:** The help text for CLI was missing a parameter on firmware update. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **New SNMP field showing the activation time of a new software update:** Software update via SNMP is done in two steps: First the new release is updated, second is the activation of the previously updated software release. So far only the time stamp of the download could be obtained via SNMP. Now also the activation time stamp can be requested via SNMP. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **New SNMP field showing the activation time of a new software update:** Software update via SNMP is done in two steps: First the new release is updated, second is the activation of the previously updated software release. So far only the time stamp of the download could be obtained via SNMP. Now also the activation time stamp can be requested via SNMP. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **WLAN client TLS version:** It is now possible to configure the preferred TLS version for each WLAN client network if WPA-EAPTLS is configured. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **WLAN client TLS version:** It is now possible to configure the preferred TLS version for each WLAN client network if WPA-EAPTLS is configured. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **SDK improvements:** It is possible now to perform an incremental configuration update from the SDK now. This is analogue to the option "missing config directives will be ignored" in the web GUI. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **SDK improvements:** It is possible now to perform an incremental configuration update from the SDK now. This is analogue to the option "missing config directives will be ignored" in the web GUI. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Exclude WAN links from HotsPlots VPN:** By default all available WAN links are used for transmission of Hotspot data. It is possible now to omit WAN links from data transmission. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Exclude WAN links from HotsPlots VPN:** By default all available WAN links are used for transmission of Hotspot data. It is possible now to omit WAN links from data transmission. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Allow individual SSL settings for WPA-EAP-TLS:** It is possible now to set up individual SSL settings for WLAN with WPA-EAP-TLS setup. Please contact our customer support if you need this feature. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Allow individual SSL settings for WPA-EAP-TLS:** It is possible now to set up individual SSL settings for WLAN with WPA-EAP-TLS setup. Please contact our customer support if you need this feature. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Support for new configuration version 1.11:** The new software release supports conversion of configuration files with version ID up to 1.11. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | | | **Support for new configuration version 1.11:** The new software release supports conversion of configuration files with version ID up to 1.11. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.102/ | 4.1.0.102]] | |
| **Limit band width per Wi-Fi client:** In AP mode the maximum band-width may be limited per Wi-Fi client. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Limit band width per Wi-Fi client:** In AP mode the maximum band-width may be limited per Wi-Fi client. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **GUI improvements:** On interfaces which show a minus symbol to remove entries (i.e. firewall rules) the corresponding setting was deleted immediately. This is now safeguarded by an alert to prevent accidental remove of settings. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **GUI improvements:** On interfaces which show a minus symbol to remove entries (i.e. firewall rules) the corresponding setting was deleted immediately. This is now safeguarded by an alert to prevent accidental remove of settings. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Firmware blobs:** To comply with RED is not possible to load unsigned firmware blobs any more. All firmware blobs are signed now. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Firmware blobs:** To comply with RED is not possible to load unsigned firmware blobs any more. All firmware blobs are signed now. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Timezone update:** The timezone list has been updated to version 2017c. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Timezone update:** The timezone list has been updated to version 2017c. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **SNMPv3 engine ID con1guration:** Engine ID for SNMPv3 traps can be configured now. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **SNMPv3 engine ID con1guration:** Engine ID for SNMPv3 traps can be configured now. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **CAN shield for NB800:** The NB800 Dual-CAN shield is now fully supported. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **CAN shield for NB800:** The NB800 Dual-CAN shield is now fully supported. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **WLAN drivers:** The WLAN drivers have been updated to a newer version. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **WLAN drivers:** The WLAN drivers have been updated to a newer version. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Bridge VLAN interfaces:** Software bridge devices BR0 and BR1 were added to the options provided for bridged VLAN interfaces. This allows VLAN interfaces to be bridged with WLAN and layer two VPN (TAP) interfaces. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Bridge VLAN interfaces:** Software bridge devices BR0 and BR1 were added to the options provided for bridged VLAN interfaces. This allows VLAN interfaces to be bridged with WLAN and layer two VPN (TAP) interfaces. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **NB800 COM/IO shield:** NB800 with COM/IO has now full support for IO interface. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **NB800 COM/IO shield:** NB800 with COM/IO has now full support for IO interface. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Hayes AT Modem Emulator:** Devices with serial interface provide a Hayes AT Modem Emulator. This can be used to replace existing modem based data-call applications. For further information read our case study. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Hayes AT Modem Emulator:** Devices with serial interface provide a Hayes AT Modem Emulator. This can be used to replace existing modem based data-call applications. For further information read our case study. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **WLAN SSID:** The WLAN SSID configuration via webgui has been revised to allow more special characters. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **WLAN SSID:** The WLAN SSID configuration via webgui has been revised to allow more special characters. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Hostapd and wpa-supplicant updates:** Hostapd and wpa-supplicant were updated to version 2017-08-24. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Hostapd and wpa-supplicant updates:** Hostapd and wpa-supplicant were updated to version 2017-08-24. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **WLAN firmware update:** The WLAN chipset firmware files of the NB800 and routers with an 802.11ac WLAN chipset were updated to a newer version. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **WLAN firmware update:** The WLAN chipset firmware files of the NB800 and routers with an 802.11ac WLAN chipset were updated to a newer version. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Regulatory Database:** The wireless regulatory database is handled as firmware file now. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Regulatory Database:** The wireless regulatory database is handled as firmware file now. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| **Mobile IP services:** Starting with release 4.1.0.100 Mobile IP is activated by default and does not require an extra software license. | [[ftp://share.netmodule.com/router/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | | | **Mobile IP services:** Starting with release 4.1.0.100 Mobile IP is activated by default and does not require an extra software license. | [[https://share.netmodule.com/public/system-software/4.1/4.1.0.100/ | 4.1.0.100]] | |
| |
==== New in Version 4.0 ==== | ==== New in Version 4.0 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **Wait for configuration change task to be finished:** Changing a configuration setting via CLI or SDK does not block. A new function was implemented to request if all pending tasks have been finished and it is safe to send new configuration change requests. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | | | **Wait for configuration change task to be finished:** Changing a configuration setting via CLI or SDK does not block. A new function was implemented to request if all pending tasks have been finished and it is safe to send new configuration change requests. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | |
| **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | | | **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | |
| **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | | | **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | |
| **Conversion of configuration version 1.12:** Configuration files of version 1.12 can be imported or converted on down grade from newest SW release. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | | | **Conversion of configuration version 1.12:** Configuration files of version 1.12 can be imported or converted on down grade from newest SW release. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.111/ | 4.0.0.111]] | |
| **Provide same USB drivers for all platforms:** For our products different drivers for external USB serial or USB ethernet adapters had been shipped. We now provide the same drivers for all our routers. Please refer to our manual for detailed description of supported 3rd party hardware. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | | | **Provide same USB drivers for all platforms:** For our products different drivers for external USB serial or USB ethernet adapters had been shipped. We now provide the same drivers for all our routers. Please refer to our manual for detailed description of supported 3rd party hardware. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | |
| **GUI improvements:** A SIM card which required a PIN did show "unknown" for pin protection in overview and "error" on SIM state until the correct PIN was applied. The current IPsec status shown in the web interface was inconsistent at different locations. The status is shown identical everywhere now. A WAN interface on a disabled LAN port would show as "dialing" in the overview. That was fixed. It shows "disabled" now. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | | | **GUI improvements:** A SIM card which required a PIN did show "unknown" for pin protection in overview and "error" on SIM state until the correct PIN was applied. The current IPsec status shown in the web interface was inconsistent at different locations. The status is shown identical everywhere now. A WAN interface on a disabled LAN port would show as "dialing" in the overview. That was fixed. It shows "disabled" now. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | |
| **New SNMP field showing the activation time of a new software update:** Software update via SNMP is done in two steps: First the new release is updated, second is the activation of the previously updated software release. So far only the time stamp of the download could be obtained via SNMP. Now also the activation time stamp can be requested via SNMP. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | | | **New SNMP field showing the activation time of a new software update:** Software update via SNMP is done in two steps: First the new release is updated, second is the activation of the previously updated software release. So far only the time stamp of the download could be obtained via SNMP. Now also the activation time stamp can be requested via SNMP. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | |
| **Allow individual SSL settings for WPA-EAP-TLS:** It is possible now to set up individual SSL settings for WLAN with WPA-EAP-TLS setup. Please contact our customer support if you need this feature. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | | | **Allow individual SSL settings for WPA-EAP-TLS:** It is possible now to set up individual SSL settings for WLAN with WPA-EAP-TLS setup. Please contact our customer support if you need this feature. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | |
| **Support for new configuration version 1.11:** The new software release supports conversion of configuration files with version ID up to 1.11. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | | | **Support for new configuration version 1.11:** The new software release supports conversion of configuration files with version ID up to 1.11. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.110/ | 4.0.0.110]] | |
| **Firmware Update for Sierra Wireless MC74xx Modems:** It is now possible to upgrade the firmware for Sierra MC74xx modems. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.108/ | 4.0.0.108]] | | | **Firmware Update for Sierra Wireless MC74xx Modems:** It is now possible to upgrade the firmware for Sierra MC74xx modems. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.108/ | 4.0.0.108]] | |
| **TCP Timestamps:** TCP timestamps are part of the PAWS (Protection Against Wrapped Sequence numbers) mechanism which avoid that TCP sequence numbers will wrap and break long data stream transfers on a very fast network connection. However, if TCP timestamps are enabled, a remote attacker can guess the uptime of the system which may indicate that no recent security patches have been applied. If desired, this option can be turned off now. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **TCP Timestamps:** TCP timestamps are part of the PAWS (Protection Against Wrapped Sequence numbers) mechanism which avoid that TCP sequence numbers will wrap and break long data stream transfers on a very fast network connection. However, if TCP timestamps are enabled, a remote attacker can guess the uptime of the system which may indicate that no recent security patches have been applied. If desired, this option can be turned off now. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **SCEP CA Identifier:** We have added option to configure the CA identifier which is used to pair with the SCEP server. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **SCEP CA Identifier:** We have added option to configure the CA identifier which is used to pair with the SCEP server. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Number of Firewall Groups/Rules:** The number of firewall groups has been increased from 5 to 10. The number of firewall rules has been increased from 35 to 50. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **Number of Firewall Groups/Rules:** The number of firewall groups has been increased from 5 to 10. The number of firewall rules has been increased from 35 to 50. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Secondary DHCP Relay Server:** It is now possible to specify a secondary DHCP relay server. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **Secondary DHCP Relay Server:** It is now possible to specify a secondary DHCP relay server. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **GPS Flap Detection:** Under some rare circumstances it happened that the GPS signal was flapping and not getting stable anymore. It is now possible to set surveyor.gnss.maxflaps (max. number of flaps per 5min) and reset the module if exceeded. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **GPS Flap Detection:** Under some rare circumstances it happened that the GPS signal was flapping and not getting stable anymore. It is now possible to set surveyor.gnss.maxflaps (max. number of flaps per 5min) and reset the module if exceeded. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **QoS and WLAN EAP:** If QoS was operating on a WLAN interface it may have happened that EAP packets were not delivered in in-time. They will now pass through the scheduler without any restriction. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **QoS and WLAN EAP:** If QoS was operating on a WLAN interface it may have happened that EAP packets were not delivered in in-time. They will now pass through the scheduler without any restriction. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **New Events:** Added system-error and system-no-error events which indicate service failures. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **New Events:** Added system-error and system-no-error events which indicate service failures. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Signature Algorithm for Certificates:** It is now possible to configure the signature algorithm used when creating certificates. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **Signature Algorithm for Certificates:** It is now possible to configure the signature algorithm used when creating certificates. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Improved SMS Management:** The SMS daemon is now able to handle scrambled message indexes. Usually this does not happen but will be covered now. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **Improved SMS Management:** The SMS daemon is now able to handle scrambled message indexes. Usually this does not happen but will be covered now. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **IP Address of WLAN Clients:** The IP address of WLAN clients will now be shown in CLI/GUI even if it has not been assigned via DHCP. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **IP Address of WLAN Clients:** The IP address of WLAN clients will now be shown in CLI/GUI even if it has not been assigned via DHCP. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Drop ICMP Packets with Timestamps:** With ICMP timestamps enabled, a remote attacker might be able to guess the uptime of the system. Thus, any ICMP packets containing timestamps are now being dropped. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **Drop ICMP Packets with Timestamps:** With ICMP timestamps enabled, a remote attacker might be able to guess the uptime of the system. Thus, any ICMP packets containing timestamps are now being dropped. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Serial Attributes for IBIS:** It is now possible to configure all required serial attributes for the IBIS interface. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | | | **Serial Attributes for IBIS:** It is now possible to configure all required serial attributes for the IBIS interface. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.107/ | 4.0.0.107]] | |
| **Power Down on Deactivated USB Ports:** Deactivated USB ports will be now without power. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.106/ | 4.0.0.106]] | | | **Power Down on Deactivated USB Ports:** Deactivated USB ports will be now without power. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.106/ | 4.0.0.106]] | |
| **SDK Debug Levels:** It is now possible to set, get and reset the debug level of system daemons. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.106/ | 4.0.0.106]] | | | **SDK Debug Levels:** It is now possible to set, get and reset the debug level of system daemons. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.106/ | 4.0.0.106]] | |
| **Updating Backup Configuration:** The backup configuration, i.e. the configuration stored during a software update, can now be updated by using the CLI with -b switch. The corresponding configuration will be applied when the software update is being finished at next reboot. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.106/ | 4.0.0.106]] | | | **Updating Backup Configuration:** The backup configuration, i.e. the configuration stored during a software update, can now be updated by using the CLI with -b switch. The corresponding configuration will be applied when the software update is being finished at next reboot. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.106/ | 4.0.0.106]] | |
| **CLI Virtualization Status:** The CLI is now able to display status information about any running virtual guests. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | | | **CLI Virtualization Status:** The CLI is now able to display status information about any running virtual guests. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | |
| **Band Selection for Sierra MC7430:** It is now possible to select the preferred band for the Sierra MC7430. Operation in LTE band 28 has been verified with Australian provider Telstra. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | | | **Band Selection for Sierra MC7430:** It is now possible to select the preferred band for the Sierra MC7430. Operation in LTE band 28 has been verified with Australian provider Telstra. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | |
| **Serial Device Server Keepalive:** The device server for serial ports is now supporting the keepalive NOP command when using the telnet protocol. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | | | **Serial Device Server Keepalive:** The device server for serial ports is now supporting the keepalive NOP command when using the telnet protocol. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | |
| **More DHCP Leases:** The DHCP server does now support more than 100 leases. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | | | **More DHCP Leases:** The DHCP server does now support more than 100 leases. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | |
| **SDK Arguments:** The arguments for SDK scripts can now contain slashes and colons. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | | | **SDK Arguments:** The arguments for SDK scripts can now contain slashes and colons. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.105/ | 4.0.0.105]] | |
| **Support for Huawei MC7430:** The Huawei MC7430 is now supported. This modem does not support voice calls yet. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **Support for Huawei MC7430:** The Huawei MC7430 is now supported. This modem does not support voice calls yet. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **New SDK Functions:** USSD requests can now be issued using the nb_ussd_query function. We further added an uptime function which returns the number of seconds since bootup. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **New SDK Functions:** USSD requests can now be issued using the nb_ussd_query function. We further added an uptime function which returns the number of seconds since bootup. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **DHCP Server on Alias Address:** The DHCP server was restricted to operate on the primary address. It can also use the alias address now. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **DHCP Server on Alias Address:** The DHCP server was restricted to operate on the primary address. It can also use the alias address now. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **NB2800 Console:** It’s now possible to enable the printout of the serial console. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **NB2800 Console:** It’s now possible to enable the printout of the serial console. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **NB2800 Voice Gateway:** The NB2800 supports now up to 4 voice modems with up to 3 concurrent channels. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **NB2800 Voice Gateway:** The NB2800 supports now up to 4 voice modems with up to 3 concurrent channels. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **LXC Device Configuration:** It is now possible to configure CAN devices which will be available in the LXC guest. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **LXC Device Configuration:** It is now possible to configure CAN devices which will be available in the LXC guest. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **New SNMP Extensions:** The nbGnssTable is now showing horizontal speed, vertical speed and the track angle. The nbAdminTable is now showing the current system date. Counters for downloaded/uploaded data in the nbWanTable are now wrapped correctly. The IF-MIB is now returning proper ifOpenStatus values. We also fixed some typos in the VENDOR MIB description. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **New SNMP Extensions:** The nbGnssTable is now showing horizontal speed, vertical speed and the track angle. The nbAdminTable is now showing the current system date. Counters for downloaded/uploaded data in the nbWanTable are now wrapped correctly. The IF-MIB is now returning proper ifOpenStatus values. We also fixed some typos in the VENDOR MIB description. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **TAB Completion for parrotlog:** The parrotlog application does now expand any parameter if the TAB key is hit. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **TAB Completion for parrotlog:** The parrotlog application does now expand any parameter if the TAB key is hit. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **Enhanced IPsec Supervision:** IPsec tunnels will now be reloaded individually if they are down for 1 minute. The whole IPsec service will be restarted if all tunnels are down for 3 minutes. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | | | **Enhanced IPsec Supervision:** IPsec tunnels will now be reloaded individually if they are down for 1 minute. The whole IPsec service will be restarted if all tunnels are down for 3 minutes. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.104/ | 4.0.0.104]] | |
| **Firewall Rules for OSPF:** It is now possible to filter out OSPF packets by means of firewall rules. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Firewall Rules for OSPF:** It is now possible to filter out OSPF packets by means of firewall rules. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Static Multicast Routing:** We have added support for static multicast routes. Aparat from IGMP Proxy, they can be used to implement bidirectional multicast routing. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Static Multicast Routing:** We have added support for static multicast routes. Aparat from IGMP Proxy, they can be used to implement bidirectional multicast routing. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Console on Serial Port:** The serial console can now be turned off completely. The KPL/KBOOT images are not required anymore. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Console on Serial Port:** The serial console can now be turned off completely. The KPL/KBOOT images are not required anymore. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **SDK Transfers:** The nb_transfer functions are now supporting ftps, https, imaps, pop3s, smtps and sftp. Files can now be downloaded to /tmp. We further fixed a flaw when checking URLs. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **SDK Transfers:** The nb_transfer functions are now supporting ftps, https, imaps, pop3s, smtps and sftp. Files can now be downloaded to /tmp. We further fixed a flaw when checking URLs. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **New SNMP Extensions:** We have added the following SNMP extensions: <WRAP> | | **New SNMP Extensions:** We have added the following SNMP extensions: <WRAP> |
* nbGnssTable:gnssNumSatUsed | * nbGnssTable:gnssNumSatUsed |
* nbWlanTable::wlanSignalStrength | * nbWlanTable::wlanSignalStrength |
* nbWlanStationTable | * nbWlanStationTable |
</WRAP> Further, we have added tables of IF-MIB and IP-MIB. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | </WRAP> Further, we have added tables of IF-MIB and IP-MIB. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Support for Disabling Ethernet Ports:** It is now possible to turn off dedicated ports of the Ethernet Switch. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Support for Disabling Ethernet Ports:** It is now possible to turn off dedicated ports of the Ethernet Switch. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Support for En-/Disabling CAN Interfaces:** It is now possible to turn on/off CAN interfaces by means of configuration settings. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Support for En-/Disabling CAN Interfaces:** It is now possible to turn on/off CAN interfaces by means of configuration settings. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Extended Storage:** It is now possible to store syslog messages and SDK files on extended storage if available. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Extended Storage:** It is now possible to store syslog messages and SDK files on extended storage if available. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Additional DH Groups for IPsec:** We have added Diffie-Hellman groups 16-21 used for IPsec. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Additional DH Groups for IPsec:** We have added Diffie-Hellman groups 16-21 used for IPsec. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Advanced Hardware Failure Detection:** We are now detecting hardware failures at a very early stage and also periodically during runtime. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Advanced Hardware Failure Detection:** We are now detecting hardware failures at a very early stage and also periodically during runtime. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **New Managed WLAN Implementation:** We have upgraded to FreeWTP for managing WLAN access-points remotely. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **New Managed WLAN Implementation:** We have upgraded to FreeWTP for managing WLAN access-points remotely. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **USSD Queries on Sierra MC Modems:** Sending USSD queries has been verified for Sierra MC7304/MC7354/MC7430/MC7455/MC9090. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **USSD Queries on Sierra MC Modems:** Sending USSD queries has been verified for Sierra MC7304/MC7354/MC7430/MC7455/MC9090. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **Bootloader Password:** The bootloader is now supporting SHA256 salted passwords. The password can now differ from the admin password. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | | | **Bootloader Password:** The bootloader is now supporting SHA256 salted passwords. The password can now differ from the admin password. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.103/ | 4.0.0.103]] | |
| **WEP Hex Keys for WLAN Client:** It is now possible to configure WEP40/WEP104 keys in ASCII and HEX notation. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.102/ | 4.0.0.102]] | | | **WEP Hex Keys for WLAN Client:** It is now possible to configure WEP40/WEP104 keys in ASCII and HEX notation. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.102/ | 4.0.0.102]] | |
| **Configurable IP-Passthrough Network:** It is now possible to configure the WAN network which will be passed-through to a LAN host and to communicate with other devices in that network. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.101/ | 4.0.0.101]] | | | **Configurable IP-Passthrough Network:** It is now possible to configure the WAN network which will be passed-through to a LAN host and to communicate with other devices in that network. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.101/ | 4.0.0.101]] | |
| **Firmware Update on NB2800/NB3800:** Firmware updates can now be run on NB2800/NB3800. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.101/ | 4.0.0.101]] | | | **Firmware Update on NB2800/NB3800:** Firmware updates can now be run on NB2800/NB3800. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.101/ | 4.0.0.101]] | |
| **SDK Workdays/Weekend Triggers:** Triggering scripts only on workdays or weekend is now possible. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.101/ | 4.0.0.101]] | | | **SDK Workdays/Weekend Triggers:** Triggering scripts only on workdays or weekend is now possible. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.101/ | 4.0.0.101]] | |
| **Kernel/System Upgrade:** We have migrated to OpenWRT Chaos Calmer which includes an upgrade to Linux Kernel 3.18.16 and recent versions of the packages. This comes with improvements and security fixes for specific packages. The overall routing performance has been increased significantly. Please note that the toolchain has changed from 4.4.5_uClibc-0.9.31 to 4.8-linaro_uClibc-0.9.33.2. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Kernel/System Upgrade:** We have migrated to OpenWRT Chaos Calmer which includes an upgrade to Linux Kernel 3.18.16 and recent versions of the packages. This comes with improvements and security fixes for specific packages. The overall routing performance has been increased significantly. Please note that the toolchain has changed from 4.4.5_uClibc-0.9.31 to 4.8-linaro_uClibc-0.9.33.2. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Support for New Models:** The new models NB2800 and NB3701/NB3711/NB3800 are now supported. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Support for New Models:** The new models NB2800 and NB3701/NB3711/NB3800 are now supported. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Support for New Modules:** The following modules are now supported: <WRAP> | | **Support for New Modules:** The following modules are now supported: <WRAP> |
* Huawei EM100 | * Huawei EM100 |
* Compex WLE600VX | * Compex WLE600VX |
* u-blox NEO-M8L | * u-blox NEO-M8L |
</WRAP> | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | </WRAP> | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Bridged GRE TAP Interfaces:** It is now possible to bridge a GRE TAP tunnel to a LAN interface. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Bridged GRE TAP Interfaces:** It is now possible to bridge a GRE TAP tunnel to a LAN interface. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **DynDNS TSIG Update:** Support for dynamic DNS updates via TSIG has been added. Transaction SIGnature (TSIG) is a secure mechanism to authenticate updates of a zone in the DNS database.| [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **DynDNS TSIG Update:** Support for dynamic DNS updates via TSIG has been added. Transaction SIGnature (TSIG) is a secure mechanism to authenticate updates of a zone in the DNS database.| [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Enhanced Certificate Management:** The certificate management hast been enhanced. The signature algorithms SHA1, SHA256 and SHA512 and custom Diffie-Hellman primes can now be used when creating certificates. It is further possible to upload authorized keys used for authenticating at the SSH server. Certificate enrollment over SSCEP has been extended and made compatible with Microsoft Windows Server. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Enhanced Certificate Management:** The certificate management hast been enhanced. The signature algorithms SHA1, SHA256 and SHA512 and custom Diffie-Hellman primes can now be used when creating certificates. It is further possible to upload authorized keys used for authenticating at the SSH server. Certificate enrollment over SSCEP has been extended and made compatible with Microsoft Windows Server. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Enhanced Firmware Update:** A progress bar is now shown when updating the firmware of a module. In addition, the update procedure for the modems ME909 and MU609 has been revised. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Enhanced Firmware Update:** A progress bar is now shown when updating the firmware of a module. In addition, the update procedure for the modems ME909 and MU609 has been revised. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **New Extensions for Extended Routes:** It is now possible to force packets to be forwarded over a specific interface and discard them if the interface is down. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **New Extensions for Extended Routes:** It is now possible to force packets to be forwarded over a specific interface and discard them if the interface is down. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Disable USB Ports:** The USB port can be disabled now in order to avoid running any USB code. The USB power supply remains active. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Disable USB Ports:** The USB port can be disabled now in order to avoid running any USB code. The USB power supply remains active. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Support for USB Ethernet Asix Adapter:** Asix-based USB Ethernet adapters are now supported. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Support for USB Ethernet Asix Adapter:** Asix-based USB Ethernet adapters are now supported. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Firewall Logging:** Logging of firewall activities can now be achieved by enabling a flag in the firewall rule. This option generates system log entries if a rule has matched. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Firewall Logging:** Logging of firewall activities can now be achieved by enabling a flag in the firewall rule. This option generates system log entries if a rule has matched. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **IKEv2 for IPsec:** We have migrated to StrongSwan 5.3.4 and added support for IKEv2 and MOBIKE (RFC 4555). It is also possible to configure Perfect Forward Secrecy (PFS) in detail. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **IKEv2 for IPsec:** We have migrated to StrongSwan 5.3.4 and added support for IKEv2 and MOBIKE (RFC 4555). It is also possible to configure Perfect Forward Secrecy (PFS) in detail. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **IPsec Expert Mode:** IPsec expert mode files can now be generated and uploaded. Currently, this is limited to PKI server mode. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **IPsec Expert Mode:** IPsec expert mode files can now be generated and uploaded. Currently, this is limited to PKI server mode. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Ignition Voltage Sense:** The ignition voltage sense feature of the NB2800 can be used to run a delayed halt of the system if the ignition voltage has dropped. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Ignition Voltage Sense:** The ignition voltage sense feature of the NB2800 can be used to run a delayed halt of the system if the ignition voltage has dropped. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Improved WLAN Roaming:** We improved WLAN background scanning to faster detect nearby stations which guarantess seamless handover to access points with higher signal strength. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Improved WLAN Roaming:** We improved WLAN background scanning to faster detect nearby stations which guarantess seamless handover to access points with higher signal strength. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Managed WLAN over CAPWAP:** We have implemented the Control And Provisioning of Wireless Access Points (CAPWAP) protocol according to RFC 5415. With CAPWAP it is possible to control and monitor the WLAN access-point of the router remotely. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Managed WLAN over CAPWAP:** We have implemented the Control And Provisioning of Wireless Access Points (CAPWAP) protocol according to RFC 5415. With CAPWAP it is possible to control and monitor the WLAN access-point of the router remotely. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Masquerading by Source Address:** It is now possible to perform masquerading for specific source addresses. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Masquerading by Source Address:** It is now possible to perform masquerading for specific source addresses. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Multipath TCP:** Support for Multipath-TCP (RFC 6824) has been added. MPTCP can be used to establish a TCP connection with multiple paths in order to maximize resource usage and increase redundancy. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Multipath TCP:** Support for Multipath-TCP (RFC 6824) has been added. MPTCP can be used to establish a TCP connection with multiple paths in order to maximize resource usage and increase redundancy. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Multiple Admin Accounts:** Configuring multiple admin users is now possible. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Multiple Admin Accounts:** Configuring multiple admin users is now possible. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **NAPT Enhancements:** The target or source address can now be specified for NAPT rules. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **NAPT Enhancements:** The target or source address can now be specified for NAPT rules. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **OPC-UA SDK Functions:** The SDK has been extended with functions to communicate with an OPC-UA server. The OPC Unified Architecture (OPC-UA) protocol suite provides a cross-platform service-oriented architecture and corresponds to an industry standard that enables software to connect devices, machines and systems from different manufacturers using same interface. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **OPC-UA SDK Functions:** The SDK has been extended with functions to communicate with an OPC-UA server. The OPC Unified Architecture (OPC-UA) protocol suite provides a cross-platform service-oriented architecture and corresponds to an industry standard that enables software to connect devices, machines and systems from different manufacturers using same interface. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **OSPF/BGP:** The Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) routing protocols have been added. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **OSPF/BGP:** The Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) routing protocols have been added. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Multiple OpenVPN Client Networks:** It is now possible to specify multiple client networks behind an OpenVPN tunnel. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Multiple OpenVPN Client Networks:** It is now possible to specify multiple client networks behind an OpenVPN tunnel. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **SDK Extensions:** We added support for PCRE (Perl Compatible Regular Expressions) in SDK scripts. It is also possible now to send SNMPv3 trap/inform notifications. Functions for mounting and accessing storage media have been extended. The recvmsg function is now able to return the source address of the sender. Using the nb_userpage_register function one can now create webpages which are also visible for non-admin users. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **SDK Extensions:** We added support for PCRE (Perl Compatible Regular Expressions) in SDK scripts. It is also possible now to send SNMPv3 trap/inform notifications. Functions for mounting and accessing storage media have been extended. The recvmsg function is now able to return the source address of the sender. Using the nb_userpage_register function one can now create webpages which are also visible for non-admin users. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Partial Configuration Update:** It is now possible to update the system configuration partially, that means only specific parts of the configuration without resetting other values to factory default. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Partial Configuration Update:** It is now possible to update the system configuration partially, that means only specific parts of the configuration without resetting other values to factory default. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **QoS Bandwidth Congestion:** QoS has been extended to automatically measure the bandwidth of a link and adapt the queue sizes accordingly. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **QoS Bandwidth Congestion:** QoS has been extended to automatically measure the bandwidth of a link and adapt the queue sizes accordingly. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **QoS for OpenVPN:** Running QoS on top of OpenVPN connections is now possible. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **QoS for OpenVPN:** Running QoS on top of OpenVPN connections is now possible. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **RSTP:** It’s now possible to perform the Rapid Spanning Tree Protocol (RSTP) according to IEEE 802.1D on top of software-bridged Ethernet ports. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **RSTP:** It’s now possible to perform the Rapid Spanning Tree Protocol (RSTP) according to IEEE 802.1D on top of software-bridged Ethernet ports. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **SMS Short Number:** Support for sending messages to short codes has been added. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **SMS Short Number:** Support for sending messages to short codes has been added. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **New WWAN Features:** The required signal strength can now be specified by means of link quality levels rather than just the RSSI value. You can now further specify the mobile bands to which the modem shall register (if supported). | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **New WWAN Features:** The required signal strength can now be specified by means of link quality levels rather than just the RSSI value. You can now further specify the mobile bands to which the modem shall register (if supported). | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **SNMP Extensions:** We have extended the nbAdminTable for storing and scheduling software and configuration updates. Please take a look at the VENDOR-MIB for getting further information. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **SNMP Extensions:** We have extended the nbAdminTable for storing and scheduling software and configuration updates. Please take a look at the VENDOR-MIB for getting further information. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Updates over SFTP:** Software and configuration updates over SFTP are now possible. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Updates over SFTP:** Software and configuration updates over SFTP are now possible. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Virtualization with LXC:** We added support for LXC (see {{https://linuxcontainers.org// | linuxcontainers.org }}) which allows customers to set up an isolated operating system for running any third-party applications. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Virtualization with LXC:** We added support for LXC (see {{https://linuxcontainers.org// | linuxcontainers.org }}) which allows customers to set up an isolated operating system for running any third-party applications. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **Additional WLAN Features:** We have added support for Protected Management Frames (PMF) according to IEEE 802.11w. It is further possible now to limit the available ciphers and run 802.11n with CCMP only. One may also enable the SGI20/SGI40 option if supported by the WLAN module. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **Additional WLAN Features:** We have added support for Protected Management Frames (PMF) according to IEEE 802.11w. It is further possible now to limit the available ciphers and run 802.11n with CCMP only. One may also enable the SGI20/SGI40 option if supported by the WLAN module. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
| **CoovaChilli Hotspot:** The CoovaChilli captive portal can be provided over a dedicated software release including support for Walled Gardens, RADIUS accounting and bandwidth limiting. | [[ftp://share.netmodule.com/router/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | | | **CoovaChilli Hotspot:** The CoovaChilli captive portal can be provided over a dedicated software release including support for Walled Gardens, RADIUS accounting and bandwidth limiting. | [[https://share.netmodule.com/public/system-software/4.0/4.0.0.100/ | 4.0.0.100]] | |
==== New in Version 3.8 ==== | ==== New in Version 3.8 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.114/ | 3.8.0.114]] | | | **Support for new GNSS modules:** Added support for new Ublox NEO-M8 modules. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.114/ | 3.8.0.114]] | |
| **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.114/ | 3.8.0.114]] | | | **uBlox TOBY-L2 support:** The uBlox Toby-L2 LTE modem is now supported. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.114/ | 3.8.0.114]] | |
| **Conversion of configuration version 1.12:** Configuration files of version 1.12 can be imported or converted on down grade from newest SW release. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.114/ | 3.8.0.114]] | | | **Conversion of configuration version 1.12:** Configuration files of version 1.12 can be imported or converted on down grade from newest SW release. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.114/ | 3.8.0.114]] | |
| **Support for USB Ethernet Asix Adapter:** Asix-based USB Ethernet adapters are now supported | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.107/ | 3.8.0.107]] | | | **Support for USB Ethernet Asix Adapter:** Asix-based USB Ethernet adapters are now supported | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.107/ | 3.8.0.107]] | |
| **Sender Network for IGMP Proxy:** The configuration of a dedicated sender network for the IGMP proxy has been added. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.107/ | 3.8.0.107]] | | | **Sender Network for IGMP Proxy:** The configuration of a dedicated sender network for the IGMP proxy has been added. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.107/ | 3.8.0.107]] | |
| **Support for 802.11w Protected Management Frames:** It’s now possible to force 802.11w Protected Management Frames when running as WLAN client or access-point. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.106/ | 3.8.0.106]] | | | **Support for 802.11w Protected Management Frames:** It’s now possible to force 802.11w Protected Management Frames when running as WLAN client or access-point. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.106/ | 3.8.0.106]] | |
| **No Configuration Secrets in TechSupport:** It is now possible to create a TechSupport file without configuration secrets. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.105/ | 3.8.0.105]] | | | **No Configuration Secrets in TechSupport:** It is now possible to create a TechSupport file without configuration secrets. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.105/ | 3.8.0.105]] | |
| **Increased Volume for Voice Calls:** It is now possible to further increase the volume level for voice calls. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.104/ | 3.8.0.104]] | | | **Increased Volume for Voice Calls:** It is now possible to further increase the volume level for voice calls. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.104/ | 3.8.0.104]] | |
| **Multicast Downstream Interfaces:** We have added support for setting up multiple downstream interfaces for the IGMP proxy. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.104/ | 3.8.0.104]] | | | **Multicast Downstream Interfaces:** We have added support for setting up multiple downstream interfaces for the IGMP proxy. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.104/ | 3.8.0.104]] | |
| **GPS Supervision:** Supervising the GPS service can be configured now more precisely via the Web Manager. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.104/ | 3.8.0.104]] | | | **GPS Supervision:** Supervising the GPS service can be configured now more precisely via the Web Manager. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.104/ | 3.8.0.104]] | |
| **Firmware Update Huawei MU609/ME909:** New firmware updates for the Huawei MU609/ME909 modems are now available. They can be found on our FTP server. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | | | **Firmware Update Huawei MU609/ME909:** New firmware updates for the Huawei MU609/ME909 modems are now available. They can be found on our FTP server. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | |
| **IPSec Configuration:** We added a continue button for the IPsec pages which allows the user to apply a full set of parameters values at the end of the configuration process. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | | | **IPSec Configuration:** We added a continue button for the IPsec pages which allows the user to apply a full set of parameters values at the end of the configuration process. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | |
| **DynDNS Status:** We have added an additional status page which informs about any DynDNS activities. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | | | **DynDNS Status:** We have added an additional status page which informs about any DynDNS activities. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | |
| **LTE Bands 1/5 on Huawei ME909:** Support for LTE Bands 1 and 5 on Huawei ME909 has been added. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | | | **LTE Bands 1/5 on Huawei ME909:** Support for LTE Bands 1 and 5 on Huawei ME909 has been added. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | |
| **Larger SMS Spool Size:** The SMS spool size has been enlarged to spool up to 10 short messages. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | | | **Larger SMS Spool Size:** The SMS spool size has been enlarged to spool up to 10 short messages. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.103/ | 3.8.0.103]] | |
| **OpenVPN Upgrade:** OpenVPN has been upgraded to 2.3.7. This version is able to run connections with cipher none again. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | | | **OpenVPN Upgrade:** OpenVPN has been upgraded to 2.3.7. This version is able to run connections with cipher none again. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | |
| **New IPsec Algorithms:** The encryption algorithm AES192 (for phase 1) and the authentication algorithm SHA2-256 (for phase 2) are now supported. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | | | **New IPsec Algorithms:** The encryption algorithm AES192 (for phase 1) and the authentication algorithm SHA2-256 (for phase 2) are now supported. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | |
| **New GUI Features:** Within the GUI it is now possible to query the latest software version available at our FTP server. It can be also queried by running ''update software latest -v'' in the CLI. The TOS value for QoS services can be specified numerically now, we further added redundancy events to figure out the current VRRP master/slave state. The GUI will now throw a warning when using an SSL connection and the CA is not trusted. Trusted certificate authorities can be uploaded in the certificate section. In case the GUI is embedded in an other GUI application or if GUI ports are NATed, the user may consider setting ''http.embed=1'' to make page redirection work properly. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | | | **New GUI Features:** Within the GUI it is now possible to query the latest software version available at our FTP server. It can be also queried by running ''update software latest -v'' in the CLI. The TOS value for QoS services can be specified numerically now, we further added redundancy events to figure out the current VRRP master/slave state. The GUI will now throw a warning when using an SSL connection and the CA is not trusted. Trusted certificate authorities can be uploaded in the certificate section. In case the GUI is embedded in an other GUI application or if GUI ports are NATed, the user may consider setting ''http.embed=1'' to make page redirection work properly. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | |
| **Enhancements for RS485 Module:** The RS485 extension port has received a larger ring buffer and one can also turn the hardware flow control on or off now. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | | | **Enhancements for RS485 Module:** The RS485 extension port has received a larger ring buffer and one can also turn the hardware flow control on or off now. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | |
| **Multicast Uptream Interface:** It is now possible to configure now any interface as upstream interface for the IGMP proxy. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | | | **Multicast Uptream Interface:** It is now possible to configure now any interface as upstream interface for the IGMP proxy. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | |
| **Digital Input Port Measurement:** It is now possible to measure the number of toggles of an digital input port. They can be counted by the SDK function ''nb_dio_count''. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | | | **Digital Input Port Measurement:** It is now possible to measure the number of toggles of an digital input port. They can be counted by the SDK function ''nb_dio_count''. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.102/ | 3.8.0.102]] | |
| **New SMS Features:** It is now possible to send messages with up to 1024 characters. According to 3GPP TS 23.040, they will be split into multiple chunks with 160 characters each and will be concatenated upon reception. Depending on your modem, you can also request now a delivery report for a sent message. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | | | **New SMS Features:** It is now possible to send messages with up to 1024 characters. According to 3GPP TS 23.040, they will be split into multiple chunks with 160 characters each and will be concatenated upon reception. Depending on your modem, you can also request now a delivery report for a sent message. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | |
| **PCRE for SDK Scripts:** It is now possible to use PCRE (Perl Compatible Regular Expressions) in SDK scripts. Please refer to the language manual for getting more information about how to use them. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | | | **PCRE for SDK Scripts:** It is now possible to use PCRE (Perl Compatible Regular Expressions) in SDK scripts. Please refer to the language manual for getting more information about how to use them. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | |
| **Certificate Verification:** Uploaded or generated keys/certificates will now be verified and the GUI will moan about any certificate errors (e.g. if not yet valid). | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | | | **Certificate Verification:** Uploaded or generated keys/certificates will now be verified and the GUI will moan about any certificate errors (e.g. if not yet valid). | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | |
| ** OpenVPN Expert Mode File Export:** Users are now able to download an OpenVPN expert mode file from a previous standard configuration. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | | | ** OpenVPN Expert Mode File Export:** Users are now able to download an OpenVPN expert mode file from a previous standard configuration. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | |
| ** Reset Statistics:** It is now possible to reset the WAN link statistics (data downloaded/uploaded) with CLI and SDK scripts. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | | | ** Reset Statistics:** It is now possible to reset the WAN link statistics (data downloaded/uploaded) with CLI and SDK scripts. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.101/ | 3.8.0.101]] | |
| **Support for new product types:** [[nb2710|NB2710]], [[nb3710|NB3710]]. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Support for new product types:** [[nb2710|NB2710]], [[nb3710|NB3710]]. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Support for new internal modems:** Huawei MU609 (successor of GTM661W and EM820W). | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Support for new internal modems:** Huawei MU609 (successor of GTM661W and EM820W). | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Support for extension modules:** NetModule PCIe cards for Audio, CAN, RS-485, IBIS slave and RS-232. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Support for extension modules:** NetModule PCIe cards for Audio, CAN, RS-485, IBIS slave and RS-232. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Enhanced voice gateway:** SIP/RTCP support, user agent, Voice support for ME909. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Enhanced voice gateway:** SIP/RTCP support, user agent, Voice support for ME909. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Multicast routing with IGMP proxy:** An Internet Group Management Protocol (IGMP) proxy will track multicast group membership information of all LAN interfaces and forward multicast packets as received on the hotlink interface. Sender networks can be specified by adding appropriate host/network routes on the corresponding WAN interface. IGMP is specified in [[https://tools.ietf.org/html/rfc3376 | RFC 3376 ]]. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Multicast routing with IGMP proxy:** An Internet Group Management Protocol (IGMP) proxy will track multicast group membership information of all LAN interfaces and forward multicast packets as received on the hotlink interface. Sender networks can be specified by adding appropriate host/network routes on the corresponding WAN interface. IGMP is specified in [[https://tools.ietf.org/html/rfc3376 | RFC 3376 ]]. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Router Discovery for IPv4:** Clients can now discover NetModule Routers using the ICMP Internet Router Discovery Protocol (IRDP) according to [[http://tools.ietf.org/html/rfc1256 | RFC 1256]]. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Router Discovery for IPv4:** Clients can now discover NetModule Routers using the ICMP Internet Router Discovery Protocol (IRDP) according to [[http://tools.ietf.org/html/rfc1256 | RFC 1256]]. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Multiple WLAN SSIDs:** Multiple SSIDs can now be configured. The router will connect to the SSID with highest priority. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Multiple WLAN SSIDs:** Multiple SSIDs can now be configured. The router will connect to the SSID with highest priority. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **IPSec XAUTH (extended authentication):** Support for road warrior applications. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **IPSec XAUTH (extended authentication):** Support for road warrior applications. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Certificate management:** NetModule Routers can now request digital certificates at the certificate authority using the Simple Certificate Enrollment Protocol (SCEP) according to the current [[https://datatracker.ietf.org/doc/draft-gutmann-scep/ | SCEP Internet-Draft]]. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Certificate management:** NetModule Routers can now request digital certificates at the certificate authority using the Simple Certificate Enrollment Protocol (SCEP) according to the current [[https://datatracker.ietf.org/doc/draft-gutmann-scep/ | SCEP Internet-Draft]]. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Support for assisted GPS (A-GPS):** A-GPS is a system that is often able to significantly improve the startup performance, or time-to-first-fix (TTFF), of a GPS satellite-based positioning system. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Support for assisted GPS (A-GPS):** A-GPS is a system that is often able to significantly improve the startup performance, or time-to-first-fix (TTFF), of a GPS satellite-based positioning system. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **DynDNS improvements:** Support for Dynamic DNS update according to [[https://www.ietf.org/rfc/rfc2136.txt | RFC 2136]] and support for [[http://gnudip2.sourceforge.net/ |GnuDIP Dynamic IP DNS service]]. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **DynDNS improvements:** Support for Dynamic DNS update according to [[https://www.ietf.org/rfc/rfc2136.txt | RFC 2136]] and support for [[http://gnudip2.sourceforge.net/ |GnuDIP Dynamic IP DNS service]]. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **SDK extensions:** New API functions for SNMP, voice, CAN and Modbus, see latest SDK API manual. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **SDK extensions:** New API functions for SNMP, voice, CAN and Modbus, see latest SDK API manual. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Module firmware update:** The firmware of internal modules can now be updated. Supported modules include modems, CAN, IBIS and audio modules. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Module firmware update:** The firmware of internal modules can now be updated. Supported modules include modems, CAN, IBIS and audio modules. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **TFTP server:** A TFTP server has be included. It can be enabled by ''cli set tftpd.status=1''. The directory can be set by ''cli set tftpd.directory=/path/''. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **TFTP server:** A TFTP server has be included. It can be enabled by ''cli set tftpd.status=1''. The directory can be set by ''cli set tftpd.directory=/path/''. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **FTP server:** A TFTP server has be included. It can be enabled by ''cli set ftpd.status=1''. The FTP directory is located in ''/home/<user>''. Note that root is not allowed as FTP user. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **FTP server:** A TFTP server has be included. It can be enabled by ''cli set ftpd.status=1''. The FTP directory is located in ''/home/<user>''. Note that root is not allowed as FTP user. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Unified OpenVPN configuration files:** Unified OpenVPN configuration files containing configuration parameters, root certificate (ca), client certificate (cert) and the client private key (key) can now be imported as a single client.ovpn file. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Unified OpenVPN configuration files:** Unified OpenVPN configuration files containing configuration parameters, root certificate (ca), client certificate (cert) and the client private key (key) can now be imported as a single client.ovpn file. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Bridged VLAN interfaces:** VLAN interfaces can now be bridged. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Bridged VLAN interfaces:** VLAN interfaces can now be bridged. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Transparent Firewall:** Unobstrusive IP filtering on NB1600 with bridged Ethernet ports. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Transparent Firewall:** Unobstrusive IP filtering on NB1600 with bridged Ethernet ports. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Speed-test client:** A command line version of the speedtest.net client has been integrated. Just type ''speed-test'' in the root console. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Speed-test client:** A command line version of the speedtest.net client has been integrated. Just type ''speed-test'' in the root console. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Upgrades for packages:** gpsd, curl, chronyd, php, openvpn, openssl, dropbear, openswan, wlan, wpa_supplicant and hostapd have been updated. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Upgrades for packages:** gpsd, curl, chronyd, php, openvpn, openssl, dropbear, openswan, wlan, wpa_supplicant and hostapd have been updated. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Kernel modules:** The kernel modules ''cdc_acm'' and ''ftdi_sio'' are now present. They are required for our PCIe cards but are also helpful to drive other USB based equipment such as the [[app-notes:ble-with-bluetooth-smart-dongle| Bluegiga BLED112 BLE dongle]]. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Kernel modules:** The kernel modules ''cdc_acm'' and ''ftdi_sio'' are now present. They are required for our PCIe cards but are also helpful to drive other USB based equipment such as the [[app-notes:ble-with-bluetooth-smart-dongle| Bluegiga BLED112 BLE dongle]]. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
| **Internal software optimizations:** Improved config conversion, boot time reduction thanks to new wwanmd. | [[ftp://share.netmodule.com/router/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | | | **Internal software optimizations:** Improved config conversion, boot time reduction thanks to new wwanmd. | [[https://share.netmodule.com/public/system-software/3.8/3.8.0.100/ | 3.8.0.100]] | |
==== New in Version 3.7 ==== | ==== New in Version 3.7 ==== |
^ Feature ^ First introduced ^ | ^ Feature ^ First introduced ^ |
| **LTE Bands 1/5 on Huawei ME909:** Support for LTE Bands 1 and 5 on Huawei ME909 has been added. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.107/ | 3.7.0.107]] | | | **LTE Bands 1/5 on Huawei ME909:** Support for LTE Bands 1 and 5 on Huawei ME909 has been added. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.107/ | 3.7.0.107]] | |
| **Support for Huawei MU609:** The Huawei MU609 modem is now supported. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | | | **Support for Huawei MU609:** The Huawei MU609 modem is now supported. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | |
| **USSD Codes via CLI:** The CLI is now able to send/query USSD codes. For instance, one may query the first modem by running: | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | | | **USSD Codes via CLI:** The CLI is now able to send/query USSD codes. For instance, one may query the first modem by running: | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | |
| **SNMP Admin Access:** For SNMPv1/v2, it is now possible to specify a whole subnet rather than just a host which will be privileged for administrative access. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | | | **SNMP Admin Access:** For SNMPv1/v2, it is now possible to specify a whole subnet rather than just a host which will be privileged for administrative access. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | |
| **SDK Events:** We have added an function which is able to retrieve additional options for an event. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | | | **SDK Events:** We have added an function which is able to retrieve additional options for an event. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | |
| **DHCP Hostname:** The GUI status pages are now listing the hostname of DHCP clients (if provided). | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | | | **DHCP Hostname:** The GUI status pages are now listing the hostname of DHCP clients (if provided). | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.104/ | 3.7.0.104]] | |
| **Legal Notice:** A dedicated GUI page under SYSTEM is now pointing out that NRSW contains in part open source software that may be licensed under GPL, LGPL or other open source licenses. It further provides detailed information for each package now, including the relevant license text and the corresponding source URL. The user is now obliged to accept our end user license agreement during the initial setup of the router. We remind you that the source code of any package can be obtained by contacting our technical support at [[router@support.netmodule.com.]] | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | | | **Legal Notice:** A dedicated GUI page under SYSTEM is now pointing out that NRSW contains in part open source software that may be licensed under GPL, LGPL or other open source licenses. It further provides detailed information for each package now, including the relevant license text and the corresponding source URL. The user is now obliged to accept our end user license agreement during the initial setup of the router. We remind you that the source code of any package can be obtained by contacting our technical support at [[router@support.netmodule.com.]] | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | |
| **Redundancy Status:** The VRRP redundancy status including the currently active role can now be shown with CLI. If configured, OpenVPN will be restarted in case the redundancy role changes. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | | | **Redundancy Status:** The VRRP redundancy status including the currently active role can now be shown with CLI. If configured, OpenVPN will be restarted in case the redundancy role changes. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | |
| ** Other Remote IDs for IPSec PKI Clients:** It is now possible to specify other remote IDs (FQDN, IP address, etc) when running IPSec as PKI client. Formerly, this has been derived from the Common Name of the certificate only. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | | | ** Other Remote IDs for IPSec PKI Clients:** It is now possible to specify other remote IDs (FQDN, IP address, etc) when running IPSec as PKI client. Formerly, this has been derived from the Common Name of the certificate only. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | |
| **Increased Number of IPSec Networks:** It is now possible to specify up to 10 networks for each IPSec tunnel. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | | | **Increased Number of IPSec Networks:** It is now possible to specify up to 10 networks for each IPSec tunnel. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | |
| ** OpenVPN Duplicates:** One single certificate can be used now for multiple clients by setting the following config option: ''openvpn.tunnel.x.duplicates=allow''. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | | | ** OpenVPN Duplicates:** One single certificate can be used now for multiple clients by setting the following config option: ''openvpn.tunnel.x.duplicates=allow''. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | |
| **Enhanced WLAN Details:** The currently associated WLAN network name (SSID) as well as the DHCP address for WLAN stations can be obtained now with GUI and CLI. The number of received/transmitted bytes are shown correctly now. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | | | **Enhanced WLAN Details:** The currently associated WLAN network name (SSID) as well as the DHCP address for WLAN stations can be obtained now with GUI and CLI. The number of received/transmitted bytes are shown correctly now. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.103/ | 3.7.0.103]] | |
| **Control Debug Levels Via CLI:** The debug levels of applications can now be controlled by ''debug -l <level> <target>''. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Control Debug Levels Via CLI:** The debug levels of applications can now be controlled by ''debug -l <level> <target>''. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Send Hostname in DHCP Discover:** The hostname of the box is now submitted in DHCP discover requests (option 12 and 81) which can be used to identify the client and assign a corresponding IP address. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Send Hostname in DHCP Discover:** The hostname of the box is now submitted in DHCP discover requests (option 12 and 81) which can be used to identify the client and assign a corresponding IP address. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Switchback Option for Switchover Links:** A configuration option was added which can be used to define an interval after which a switchover link will be teared down, letting links with better priority dial and come up again after the specified time. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Switchback Option for Switchover Links:** A configuration option was added which can be used to define an interval after which a switchover link will be teared down, letting links with better priority dial and come up again after the specified time. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Configurable Initial Ping of NTP Server:** Time synchronisation was only triggered after the specified NTP servers have been pinged. This can be avoided now by means of a configuration option. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Configurable Initial Ping of NTP Server:** Time synchronisation was only triggered after the specified NTP servers have been pinged. This can be avoided now by means of a configuration option. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Clear Log Command:** We have added a clear-log alias which can be used to clear any logfiles. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Clear Log Command:** We have added a clear-log alias which can be used to clear any logfiles. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Watchdog Keepalive for Surveyor:** We implemented a keepalive mechanism for the surveyor which is now periodically notifying the watchdog. If no keepalive has been received within a specific amount of time, the watchdog will reboot the system. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Watchdog Keepalive for Surveyor:** We implemented a keepalive mechanism for the surveyor which is now periodically notifying the watchdog. If no keepalive has been received within a specific amount of time, the watchdog will reboot the system. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Support for CDMA with SIM:** It is now possible to run CDMA in combination with a SIM card. | [[ftp://share.netmodule.com/router/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | | | **Support for CDMA with SIM:** It is now possible to run CDMA in combination with a SIM card. | [[https://share.netmodule.com/public/system-software/3.7/3.7.0.102/ | 3.7.0.102]] | |
| **Update System Time via Config:** It is now possible to update the system time by uploading a configuration file with ''system.time'' being set. This can be used for instance to bypass any issues regarding the expiration of uploaded certificates. | 3.7.0.101 | | | **Update System Time via Config:** It is now possible to update the system time by uploading a configuration file with ''system.time'' being set. This can be used for instance to bypass any issues regarding the expiration of uploaded certificates. | 3.7.0.101 | |
| **Ethernet Status:** The status of the Ethernet interfaces can be derived now from the GUI and CLI.| 3.7.0.101 | | | **Ethernet Status:** The status of the Ethernet interfaces can be derived now from the GUI and CLI.| 3.7.0.101 | |